Front Sights, blade

Front Sights, globe

Globe Front Sight Spring , tempered spring steel, made in the USA This small tempered spring for a front sight is 7/8" long, and shaped with a small bend opposite the hole. The hole is .115" diameter. Tempered blued steel .010" thick, made in the U.S.A.       FS-SE-GLOBE-SIGHT-SPRING . . . $1.50

Globe Sight , the Sniper Front Sight for the U.S. Model 1863 Remington Contract Riflet. known as the ZOUAVE Musket Blued steel, this unusual sight fits the 1863 Remington Contract Rifled Rifle, commonly known as the Zouave Musket. The large 0.900" diameter ring slips over the muzzle, and snugly fits against the military front blade sight. A slight semi-circular notch is cut into the face of this sight, to perfectly index it to the factory front sight base. A kn       FS-ZOUAVE . . . $48.00

Rear Sight for Thompson Center Hawken , fits 15/16" octagon barrels, for bead front sight, disassembled with screws This Thompson Center Hawken rear sight fits their .45 or .50 caliber flint or percussion rifles, or can be fitted to any 15/16" octagon barrel. Mounts with two 6-48 screws that are 1.455" on center. This sight has the classic 'V' notch, recommended for the T/C bead front sight. The sight mounts to the base with a roll pin to secure it. Screw adjus       RS-TC-15-OS . . . $39.99 Closeout

Fine Blade Front Sight , milled brass Similar to early military flint rifle sights, this is a "barley-corn" style front sight. The base is .370" long, only .550" wide, .050" deep. The blade stands .150" above the base, and measures .093" wide. Military rifles generally have iron front sights, while most civilian rifles have brass front sights.       FS-PA-253-B . . . $11.59

Fine Blade Front Sight , milled steel Similar to early military flint rifle sights, this is a "barley-corn" style front sight. The base is .375" long, only .550" wide, .062" deep. The blade stands .150" above the base, and measures .096" wide. Military rifles generally have iron front sights, while most civilian rifles have brass front sights.       FS-PA-253-I . . . $9.79

Thompson Center Patridge Front Sight Blank , steel base A wax cast steel front sight, in the style of the Thompson Center, blade front sight. The dovetail fits a 3/8" slot measuring .375" long, .565" wide, and .093" deep. The as-cast blade is .100" thick, standing .400" above the base. Available in steel only.       FS-D37-I . . . $9.79

Spirit Level Globe Front Sight , with 12 inserts This blued steel globe front sight has a wind gauge knob to allow windage adjustment. It is slotted to accept classic Sharps front sight inserts, included. It will also accept the inserts by C. Sharps, Shiloh, MVA, Smith Enterprise, and other standard thin Sharps globe sight inserts. Rotate the upper retaining spring to insert one of the twelve sig       FS-DP-SPIRIT . . . $249.00

Beach's Front Sight , rotates between globe and blade, steel base, by Davide Pedersoli & Co. This replica of Beach's front sight copies the post Civil War front sight found on many fine single shot and lever action rifles. The blued steel base has a .379" dovetail, .082" deep, .670" wide. The brass leaf cams over a spring, forward to show an open sight post, back to show a globe with pin head bead. Imported from Italy. The blade sight will       FS-DP-BEACH . . . $110.00

Lyman Great Plains & Gemmer Hawken Rifle Front Sight , blued steel for Invest Arms produced rifles A wax cast steel front sight for the Invest Arms produced Lyman Great Plains & Gemmer Hawken Rifle. This blade front sight is identical to the factory fitted sight on the Lyman rifles. The dovetail fits a metric slot measuring .345" long, .650" wide, and .062" deep. The as cast blade is .120" thick, standing .325" above the base. Available in blued       FS-LYMAN-GPR . . . $17.99

Swiss style Globe Front Sight , machined from one piece of solid steel, blued, bead post, metric dovetail, by Davide Pedersoli, Italy Machined from solid steel, this Swiss style globe front sight has an integral dovetail base measuring .360" long, .082" deep, and .780" wide, for use on barrels up to 1-1/8" octagon. The tapered steel post, ending in a bead, is screwed into this globe sight from below. The center of this sight bead stands about .404" above the bottom of the dovetai       FS-SWISS . . . $38.99

Hawken Pistol Front Sight , brass Small pistol front sight a tiny dovetail base, only .245" long, .045" deep, about .557" wide. Used on our 15/16" pistol barrel, the blade stands .160" above the base and measures .085" wide. Machined brass.       FS-HP-B . . . $11.59

Target Front Sight Blank , brass base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1B . . . $11.59

Target Front Sight Blank , steel base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1I . . . $9.79

Front sight blade for percussion revolver, wax cast brass Front sight blade for percussion revolver, wax cast brass. Sight stands .190" tall and measures .050" wide.       FS-REVOLVER-B . . . $1.00

Front sight , Fowler, Fusil, or Trade Gun, wax cast brass This blade front sight has a pointed oval base with concave inner surface. Solder it to your round barrel, typically 1-1/2" to 2-1/2" or more behind the muzzle. The tiny blade measures .045" wide by .150" tall. Wax cast brass.       FS-FUSIL-1-B . . . $11.59

Front sight , Fowler, Fusil, or Trade Gun, wax cast steel This blade front sight has a pointed oval base with concave inner surface. Solder it to your round barrel, typically 1-1/2" to 2-1/2" or more behind the muzzle. The tiny blade measures .045" wide by .150" tall. Wax cast steel.       FS-FUSIL-1-I . . . $9.79

Globe Front Sight , with 18 inserts, by Davide Pedersoli This blued steel globe front sight is slotted to accept the classic Sharps sight inserts. Rotate the upper retaining spring to insert one of eighteen sight inserts, from the complete set, included with the sight. Manufactured in Italy, by Davide Pedersoli. The sight now has a hidden set screw in the center of the dovetail base that is accessed by a       FS-SHARPS-2 . . . $85.00

Globe Front Sight , standard .404" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. This is the shortest sight at .404". We have three different taller heights, our       FS-17-AHB . . . $49.59

Globe Front Sight , standard .494" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, the lowest is .404", our most popular .494" for       FS-17-AML . . . $49.59

Globe Front Sight , tall .854" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, our lowest .404", our most popular .494" for hun       FS-17-ATC . . . $49.59

Globe Front Sight , medium .584" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, our lowest .404", our most popular .494" for hun       FS-17-AUG . . . $49.59

Globe Front Sight , standard .464" height, metric dovetail to fit Lyman, eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from blued steel. This special sight has a metric dovetail to fit the Lyman Great Plains rifle, CVA, Traditions, and other imported rifles with a .360" dovetail. The sight height is measured from the bottom of the dovetail to       FS-17-AEU . . . $49.59

has been added to your .

---