Clean Out Screw , 10-32 thread, to repair Thompson Center rifles with exposed screw, you must tap the breech plug for this thread, steel This nice quality No. 10-32 slotted headless screw is made to REPAIR Thompson Center rifles where the exposed 8-32 threaded screw and threaded seat has been badly damage from attempting to remove it. The original thread was 8-32, it must be drilled and tapped 10-32 to accept this screw. . Not all production T/C guns have this style exposed screw, a       SCREW-10-32-TC-COX . . . $2.99

Rear Sight Elevation Spring , for Thompson Center Hawken, Renegade, and similar imported sights Rear sight elevation spring, for Thompson Center Hawken, Renegade, New Englander and many other imported models with simlar elevation adjustable sights.       RS-TC-ES . . . $2.99

Rear Sight Elevation Screw No. 2 , for earlier Thompson Center Hawken, Renegade, and others, 5-40 threads, adjustment clicks, blued steel Rear sight elevation screw, for early production Thompson Center Hawken, Renegade, and New Englander. 5-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.       RS-TC-EX-2 . . . $5.99

Ramrod rear tip , 5/16" diameter, nickel silver, 10-32 thread, tapered end for Thompson Center Cherokee, Seneca, or Patriot, 1" long Ramrod rear tip , 5/16" diameter, nickel silver, 10-32 thread, tapered end for all calibers of Thompson Center Cherokee or Seneca rifles, and Patriot pistol. The tip has a 1" overall length.       RT-TC-5-10-R-S . . . $3.99

Sideplate , for Thompson Center Hawken Rifle , brass Sideplate for a Thompson Center Hawken Rifle. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-B . . . $5.99

Frizzen , tempered, blued, for Thompson Center Hawken flintlock       LOCK-TC-FR . . . $44.99

Frizzen spring , tempered, blued, for Thompson Center Hawken flintlock       LOCK-TC-FS . . . $19.99

Frizzen screw , .700", 6-40 thread, for Thompson Center flintlocks       LOCK-TC-FX . . . $3.99

Muzzle loading rifle barrels, IBS by Green Mountain for T/C Hawken Green Mountain Interchangeable Rifle Barrels : Order a target ready round ball barrel for your Thompson Center Hawken Rifle. These rifle barrels are completely assembled, with the breech plug, lug, rib, pipes and adjustable sights installed. All barrels are blued, and include a new ramrod. Nipples are included.. Interchangeable 15/16" octagon barr

Thompson Center discontinued models, no factory parts or support Thompson Center PATRIOT Pistol discontinued, made in Rochester, New Hampshire , no factory parts or support after the factory fire, except some spare parts can sometimes be found at the T/C Custom Shop, known as: Fox Ridge Outfitters, Rochester, New Hampshire.

T/C - Thompson Center Arms - Rochester, New Hampsire, USA

Underlugs, folded & formed, for round barrels Our UL-TC-S2 is a bit longer, for use where a larger and stronger joint is required. Formed steel, the concave base is about .535" wide and about .720" long. Use 96% tin + 4% silver lead free solder. It melts at low temperature, but is stronger than lead-tin solder.       UL-TC-S2 . . . $2.49

Underlugs, folded & formed, for round barrels, with slots Our UL-TC-S3 is our small formed lug, with .260" x .100" slot for tiny key. The concave base may be soldered to your round barrel. Formed steel, the base is .545" wide x .475" long.       UL-TC-S3 . . . $2.59

Front Sight , tall blade, .062" thick nickel silver, 9mm by 3/32" copper dovetail base for CVA rifles This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined copper dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail       FS-CVA-60-TC . . . $11.59

Front Sight , tall blade, .062" thick nickel silver, 3/8" by 0.070" copper dovetail base for Pedersoli rifles This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined copper dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the d       FS-DP-60-TC . . . $11.59

Front Sight , tall blade, .062" thick nickel silver, 9mm by 1/16" copper dovetail base for Lyman rifles This front sight has a polished silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail sligh       FS-LYMAN-60-TC . . . $11.59

Front Sight , extra tall .080" thick silver blade, copper base Extra tall .080" thick blade on a copper dovetail. Nickel silver blade is .400" tall. The copper base is .370" long, .600" wide, .092" deep.       FS-TC-TWC . . . $8.99

Fancy Octagon Ramrod Pipes, with thumbnail skirt, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these fancy octagon ramrod pipes are octagon with rounds at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , th

Deluxe Round Ramrod Pipes, with ringed ends, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these deluxe ramrod pipes are round with raised rings at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , these

Ramrod pipe, brass , entry pipe with skirt, deluxe round with ringed ends, for 7/16" ramrod       RP-TC-DR-E-7-B . . . $11.99

Deluxe Round Ramrod Pipes , thumbnail skirt with ringed ends, for 5/16", 3/8", or 7/16" rod, brass, iron, or nickel silver Shown in side view, and top view, these deluxe ramrod pipes are round with raised rings at each end, the entry pipe features a decorative raised thumbnail for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass, iron, or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Design

Ramrod pipe, iron , entry pipe with thumbnail skirt, deluxe round with ringed ends, for 5/16" ramrod       RP-TC-DRT-E-5-I . . . $12.99

Fusil or Fowler Ramrod Pipes , deluxe round with ringed ends, polished brass or iron Shown in side view, and top view, these French octagon ramrod pipes are round with raised rings at each end, for your choice of 5/16" or 3/8" ramrod, available in your brass or iron, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fusils or fowlers, these are ideal for

ramrod pipe, iron , fusil entry pipe with skirt, deluxe round with ringed ends, for 3/8" ramrod Ramrod pipe, iron, fusil entry pipe with skirt, deluxe round with ringed ends, for 3/8" ramrod. Entry thimble.       RP-TC-FDR-E-6-I . . . $11.99

Fusil or Fowler Ramrod Pipes , octagon, polished brass Shown in side view, and top view, these French octagon ramrod pipes are octagon with rounds at each end, for your choice of 3/8" ramrod, available in your brass only, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fowler or fusil, these are ideal for use on many of our

has been added to your .

---