Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber. Known as a Short Starter or ball starter, use the small stud to bump the lubricated patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the       ST-6 . . . $8.99

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber. Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p       ST-7 . . . $9.99

Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers. Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p       ST-8 . . . $9.99

Hand Stamp for British Proof Mark , Birmingham Proof for post 1813, hardened steel, made in the USA, by Track of the Wolf, Inc. The Birmingham proof mark was used post 1813 for proofing black powder barrels. Typically placed below the view mark on the off flat of the breech. We have examined this stamp on Trade Guns by both Barbar, and Sharpe. Due to the large size of this stamp it can only be used on octagon barrels that are 1-1/8" or larger. The inspector's mark is about       STAMP-BPC-1813 . . . $29.99

Hand Stamp for Northwest Gun , Daisy over T. B. inspection mark for Thomas Barnett North West Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The daisy over T. B. was used by Thomas Barnett to mark North West Trade Guns. This mark is patterned from a 1820 dated Barnett North West Trade Gun. The stamp is located below the proof, and view marks just ahead of the breech on the off flat. The inspector's mark is about .360" wide, about .440" tall, and the tool body is 2-1/2" length, 1/2" dia       STAMP-DTB . . . $29.99

Hand Stamp for Northwest Gun , Edward Bond's inspection mark for Hudson's Bay Company Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The tombstone with a Sitting Fox over E.B. was used by Edward Bond to mark Hudson's Bay Company Trade Guns on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. This "Sitting Fox" logo was derived from the top of the HB Co. logo. The inspector's mark       STAMP-EB . . . $29.99

Hand Stamp for Northwest Gun , Sitting Fox in a Circle Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The Sitting Fox in a circle for use on a NorthWest Trade Gun on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. The inspector's mark is about .4" in diameter, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to       STAMP-FC . . . $29.99

Hand Stamp , Proof Mark for Brown Bess Musket, hardened steel, made in the USA, by Track of the Wolf, Inc. The King's Crown Proof mark was used by British Proof Houses to mark their approval on the breech end of the King's Musket, known today as the Brown Bess Musket . View and Proof Marks were also required on all civilian guns, after testing. The King's Crown over Arrow proof mark is generally found on the top of the barrel near the breech, or on the       STAMP-GR-A . . . $29.99

Hand Stamp , Inspector's Mark for Brown Bess, hardened steel, made in the USA, by Track of the Wolf, Inc. The King's Crown inspector's mark was used by British Board of Ordnance to mark their approval on several areas of a King's Musket, known today as the Brown Bess Musket . The King's Crown inspector's mark is often found below the triggerguard, inside the rod channel, inside the barrel channel, and inside the triggerguard bow. The inspector's mark       STAMP-GR-CROWN . . . $29.99

Hand Stamp , View Mark for Brown Bess Musket, hardened steel, made in the USA, by Track of the Wolf, Inc. The King's Crown over Crossed Scepters was a View mark used by British Proof Houses to mark their approval on the breech end of the King's Musket, known today as the Brown Bess Musket . View and Proof Marks were also required on all civilian guns, after testing. The King's Crown and Scepters View Mark is generally found on the top of the barrel ne       STAMP-GR-CS . . . $29.99

Hand Stamp for British Proof Mark , blackpowder proof mark for muzzleloading barrels, hardened steel, made in the USA, by Track of the Wolf, Inc. This proof mark is for the London proof house and was used on muzzleloading barrels since the mid 1600's. This proof stamp was typically located on the off flat of the breech within the last 2" and above any view marks. The inspector's mark is about .285" wide, about .400" tall, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished s       STAMP-GR-GP . . . $29.99

Hand Stamp , Store Keeper's Mark for Brown Bess Musket, hardened steel, made in the USA, by Track of the Wolf, Inc. The Store Keeper's Mark used by Inspectors to mark their approval on the buttstock of the King's Musket, known today as the Brown Bess Musket . The Store Keeper's Mark is generally found on the lock side of the butt stock, embossed directly into the wood after final finish. The Store Keeper's Mark is about .480" wide, about .400" tall, and the to       STAMP-GR-SKM . . . $29.99

Hand Stamp for British View Mark , view mark for muzzleloading barrels, hardened steel, made in the USA, by Track of the Wolf, Inc. This view mark is for the London proof house and was used on muzzleloading barrels since the late 1600's. This view stamp was typically located on the off flat of the breech within the last 1" and below above any proof marks. The inspector's mark is about .285" wide, about .400" tall, and the tool body is 2-1/2" length, 1/2" diameter, brightly poli       STAMP-GR-V . . . $29.99

Hand Stamp for Trade Gun , Ketland Proof or Maker's mark for Trade Guns, hardened steel, made in the USA, by Track of the Wolf, Inc. The Ketland proof or maker's mark was used by Ketland family to mark Trade Guns on the barrel. This mark was typically placed between the view and proof marks on the off flat of the breech. The inspector's mark is about .275" wide, about .400" tall, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to Rc 62 to 65       STAMP-KPM . . . $29.99

Hand Stamp for Trade Gun or Fusil , London barrel stamp, hardened steel, made in the USA, by Track of the Wolf, Inc. The London stamp was a mark of quality on Trade Guns and Fowlers imported into North America. This mark was often copied and spuriously marked on Liege, Belgium made trade guns and double barrel shotguns well into the late 1800's on double barrel shotguns. The top flat of the octagon-to-round barrel was often marked approximately 3" from the breech       STAMP-LONDON . . . $39.99

Hand Stamp for French Tulle Fusil Fusil , A. TVLLE lock stamp, hardened steel, made in the USA, by Track of the Wolf, Inc. The A. Tulle lock marking is found on French Tulle fusil de chasse lock plates ahead of the flint cock. During the early 1700's the letter "V" and "U" were used interchangably thus the TVLLE spelling. This stamp is copied from a original in Track's collection and includes a slight U shaped arc to the letters found on the original fusil. The lock m       STAMP-TULLE . . . $39.99

Allentown-Bethlehem pre shaped, non-inlet stocks, 13/16", 7/8", or 15/16" octagon 42" barrel This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Offered in three barrel channel sizes, 13/16", 7/8", or 15/16" straight octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M4 . . . $339.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M4 . . . $339.00

has been added to your .

---