Barrel, .54 caliber , 1" octagon, 36", 1-66" twist, 5.9 lb, crowned, 3/4-16 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 36" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 66" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 3/4-16 thread for a breech plug. As with any barrel the octa       BBL-54-D-36 . . . $220.00

Barrel, .58 caliber , 1" octagon, 36", 1-66" twist, 5.6 lb, crowned, 3/4-16 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 36" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 66" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 3/4-16 thread for a breech plug. As with any barrel the octa       BBL-58-D-36 . . . $220.00

Lyman's Black Powder Handbook & Loading Manual, by Sam Fadala All new Second Edition, with the largest selection of loading data for black powder rifles, pistols, shotguns, and a section on cowboy action and black powder cartridge. Over 20,000 shots were fired and recorded, from rifles, muskets, pistols, revolvers and shotguns. Soft bound volume, in 8-1/2 x 11" format, with 336 pages. The Table of Contents i       BOOK-LBPH . . . $19.99

Cartridge Case, .577 Snider , unprimed, use large rifle primer, correct head stamp, made in the U.S.A. each piece, no minimum Our new brass .577 Snider cartridge is designed for use in Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards, so bore diameter and chamber dimensions of antique guns may vary. This unprimed brass case uses a large rifle primer. The case has a overall length of 2.0", mouth outer diameter of 0.6       CASE-577-SNIDER . . . $4.49

Cartridge Case , .577-Snider, unprimed brass, use large rifle primer, correct head stamp, made in the U.S.A. 20 pieces This new production all brass .577 Snider cartridge is designed for used with the Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards and antique guns may vary on bore diameter and chamber dimensions. This unprimed brass uses a large rifle primer. The case has a overall length of 2", mouth diame       CASE-577-SNIDER-020 . . . $84.59

Cartridge Case , .577-Snider, unprimed brass, use large rifle primer, correct head stamp, made in the U.S.A. 50 pieces This new production all brass .577 Snider cartridge is designed for used with the Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards and antique guns may vary on bore diameter and chamber dimensions. This unprimed brass uses a large rifle primer. The case has a overall length of 2", mouth diame       CASE-577-SNIDER-050 . . . $204.99

Build Track's Hawken fullstock plains rifle , flintlock, with 1" straight octagon barrel up to 42" in length Price: starting at $1,154.49 Build Track's Early Hawken fullstock rifle kit, 1" octagon barrel, up to 42" barrel, traditional iron trim, with maple stock Track's best early fullstock Hawken Rifle parts were selected by the by noted gunmaker J.E. Brown , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimm

Globe Sight , the Sniper Front Sight for the U.S. Model 1863 Remington Contract Riflet. known as the ZOUAVE Musket Blued steel, this unusual sight fits the 1863 Remington Contract Rifled Rifle, commonly known as the Zouave Musket. The large 0.900" diameter ring slips over the muzzle, and snugly fits against the military front blade sight. A slight semi-circular notch is cut into the face of this sight, to perfectly index it to the factory front sight base. A kn       FS-ZOUAVE . . . $43.99

T/C Drop-in Barrel Assembly , .50 caliber, 1-66" twist, 15/16" octagon, 32" length, blued, 5.5 lb, percussion for Thompson Center Hawken Rifle. Thompson Center drop-in barrel , .50 caliber with 1-66" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Thompson Center Hawken rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, rod pipes, and underlug are blued. Weight is 5.7 pounds. Fully assembled, this nice barrel assembly is new-in-th       GMT-50-C-TC-32-B . . . $359.00

T/C Drop-in Barrel Assembly , .54 caliber, 1-66" twist, 15/16" octagon, 32" length, blued, 5.2 lb, percussion, for Thompson Center Hawken Rifle. Thompson Center drop-in barrel , .54 caliber with 1-66" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Thompson Center Hawken rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, rod pipes, and underlug are blued. Weight is 5.2 pounds. Fully assembled at the Green Mountain Barrel Company fa       GMT-54-C-TC-32-B . . . $359.00

Complete Set Brass Button Cleaning Jags : .32, .36, .38, .40, .44, .45, .50, .54, .58 and .62 caliber, 8-32 threaded steel shank This 10 piece set of brass button jags includes all of our 8-32 threaded jags. Calibers include .32, .36, .38, .40, .44, .45, .50, .54, .58 and .62. Button jags in this set are ideal for use with our 8-32 Creedmoor stainless steel ramrods. The concave end allows it to be used for loading a patched round ball. Jagged edges grip the damp cleaning pat       JB-08-SET . . . $40.50

Complete Set Brass Button Cleaning Jags : 32, .36, .38, .40, .44, .45, .50, .54, .58, .62, .69, and .75 caliber, 10-32 threaded steel shank This 12 piece set of brass button jags includes all of our 10-32 threaded jags. Calibers include .32, .36, .38, .40, .44, .45, .50, .54, .58, .62, .69 and .75. Button jags in this set are ideal for use with our 10-32 Creedmoor stainless steel ramrods. The concave end allows it to be used for loading a patched round ball. Jagged edges grip the damp       JB-10-SET . . . $49.48

Build Track's Hawken fullstock plains rifle , 1" straight octagon barrel Price: starting at $1,095.58 Build Track's fullstock Hawken Rifle kit, 1" octagon 36" barrel, traditional iron, or fancy brass trim, maple or walnut stock Track's best fullstock Hawken Rifle parts were selected by the by noted gunmaker Fred Strom , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimmed wi

Lyman Deerstalker, .50 caliber, 24" barrel, flint lock walnut, rubber recoil pad, factory installed fiber optic sights, factory new in-the-box, unfired The Lyman Deerstalker right hand flintlock rifle is stocked in walnut with a factory installed rubber recoil pad and sling swivel mounts. The black oxide finished furniture includes a single trigger with large bow for a hunter's gloved finger. The 24" octagon barrel is fitted with factory installed Lyman fiber optic sights and served with a black s       LYMAN-DEER-50-F . . . $549.99

Pistol loading rod and short starter with .32 caliber cleaning jag , 5/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .32 caliber cleaning jag Pistol loading rod and short starter with slender 5/16" diameter by 11" hickory rod. The rod is fitted with a 5/16" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .32 caliber cleaning jag, with 10-32 threads. The included .32 caliber jag increases the usable length to 12", which should all       PL-5-32 . . . $19.28

Pistol loading rod and short starter with .36 caliber cleaning jag , 5/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .36 caliber cleaning jag Pistol loading rod and short starter with slender 5/16" diameter by 11" hickory rod. The rod is fitted with a 5/16" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .36 caliber cleaning jag, with 10-32 threads. The included .36 caliber jag increases the usable length to 12", which should all       PL-5-36 . . . $19.28

Pistol loading rod and short starter with .40 caliber cleaning jag , 5/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .40 caliber cleaning jag Pistol loading rod and short starter with slender 5/16" diameter by 11" hickory rod. The rod is fitted with a 5/16" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .40 caliber cleaning jag, with 10-32 threads. The included .40 caliber jag increases the usable length to 12", which should all       PL-5-40 . . . $19.28

Pistol loading rod and short starter with .45 caliber cleaning jag , 5/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .45 caliber cleaning jag Pistol loading rod and short starter with slender 5/16" diameter by 11" hickory rod. The rod is fitted with a 5/16" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .45 caliber cleaning jag, with 10-32 threads. The included .45 caliber jag increases the usable length to 12", which should all       PL-5-45 . . . $19.58

Pistol loading rod and short starter with .40 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .40 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .40 caliber cleaning jag, with 10-32 threads. The included .40 caliber jag increases the usable length to 12", which should allow       PL-6-40 . . . $19.28

Pistol loading rod and short starter with .45 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .45 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .45 caliber cleaning jag, with 10-32 threads. The included .45 caliber jag increases the usable length to 12", which should allow       PL-6-45 . . . $19.58

Pistol loading rod and short starter with .50 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .50 caliber cleaning jag, with 10-32 threads. The included .50 caliber jag increases the usable length to 12", which should allow       PL-6-50 . . . $19.58

Pistol loading rod and short starter with .54 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .54 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .54 caliber cleaning jag, with 10-32 threads. The included .54 caliber jag increases the usable length to 12", which should allow       PL-6-54 . . . $20.08

Pistol loading rod and short starter with .58 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .58 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .58 caliber cleaning jag, with 10-32 threads. The included .58 caliber jag increases the usable length to 12", which should allow       PL-6-58 . . . $20.08

Pistol loading rod and short starter with .62 caliber cleaning jag , 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .62 caliber cleaning jag Pistol loading rod and short starter with sturdy 3/8" diameter by 11" hickory rod. The rod is fitted with a 3/8" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .62 caliber cleaning jag, with 10-32 threads. The included .62 caliber jag increases the usable length to 12", which should allow       PL-6-62 . . . $21.58

Pistol loading rod and short starter with .50 caliber cleaning jag , 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag Pistol loading rod and short starter with sturdy 7/16" diameter by 11" hickory rod. The rod is fitted with a 7/16" diameter brass tip with 10-32 female threads. Oil finished, assembled with waterproof glue, brass tips and .50 caliber cleaning jag, with 10-32 threads. The included .50 caliber jag increases the usable length to 12", which should allo       PL-7-50 . . . $19.58

has been added to your .

---