Rear sight , classic longrifle style, for 15/16" to 1" barrels wax cast steel This classic longrifle rear sight has a base .380" long, .610" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.32". The base may be file fitted to smaller slots. Use this classic longrifle rear sight on a 15/16 or 1" octagon rifle barrel. It could be thinned for use on smaller barrels. Wax cast       RS-CT-16 . . . $8.99

Rear sight, Primitive Buckhorn, wax cast steel This medium size full buckhorn sight has a base for a .615" dovetail and is .500" in width for 15/16" or 1" octagon barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.33". Wax cast steet. Deepen the "V" as needed.       RS-DB-H-1 . . . $8.99

Rear sight, Tall Semi-Buckhorn, wax cast steel This tall semi buckhorn rear sight is blank, with no notch cut. File a "V" or square notch to your desired sight picture. The base is .530" dovetail and .700" width for barrels up to 1-1/8". Height from the bottom of the dovetail to the top of the sight notch is 0.32". Wax cast steel.       RS-DB-H-2 . . . $8.99

Vernier 5" Long Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874 . . . $310.00

Vernier 3" Mid-Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874-MID . . . $305.00

Ghost Ring Tang Sight with two aperture posts, and mounting hardware, by Davide Pedersoli & Co., Italy A ghost ring tang sight by Davide Pedersoli & Co. is designed to fit many Pedersoli rifles; some Hawken models, Kodiak Express, Howdah pistol, and double barrel shotgun. Using on the Howdah pistol or double barrel shotgun will require elevating the front sight. The sight includes two posts with 0.157" diameter aperture. The sight has both windage a       RS-DP-GRS . . . $99.00 Closeout

Hadley Eye Disk , for Pedersoli 1874 Sharps Vernier Sights Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks       RS-DP-HADLEY . . . $119.00

Soule Rear sight, Vernier 3" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-3 . . . $340.00

Soule Rear sight, Vernier 4" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-4 . . . $359.00

Rear sight , 1770 Lancaster style, wax cast steel Isaac Haines style, ideal for a swamped barrel, this wax cast steel sight has concave bevels on the front three edges, and a flat top. We recommend filing a square notch for use with a blade front sight. The dovetail is about .585" long, with a .535" base about .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29       RS-DRU-1 . . . $8.99

Rear sight , Longrifle style, with skirt over dovetail, wax cast steel This rear sight has a concealed dovetail under a front and rear skirt. It will hide a rough looking slot on a 13/16” or 7/8” octagon barrel. The dovetail is about .385” as cast, it will clean up to a standard .375” dovetail. The base is .550” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.39".       RS-DRU-CT . . . $8.99

Rear sight , with extra long base, wax cast steel Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".       RS-DRU-LCT . . . $8.99

Rear sight, Pennsylvania style for 13/16" or 7/8" octagon barrel, wax cast steel Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. The sight has a small notch centered on the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .675" long, .530" wide as cast. Height from the bot       RS-FG-14 . . . $8.99

Rear sight, Tall Pennsylvania style for 13/16" or 7/8" octagon barrels, wax cast steel This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-14. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat       RS-FG-14-T . . . $8.99

Rear sight, Pennsylvania style for 15/16" or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 15/16" or 1" octagon barrel. The sight has a small notch indicated in the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .715" long, .575" wide as cast. Height from the bott       RS-FG-16 . . . $8.99

Rear sight, Tall Pennsylvania style for 15/16" or 1" octagon barrels, wax cast steel This larger version is made for a longrifle with a 15/16" or 1" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-16. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat glare       RS-FG-16-T . . . $8.99

Rear sight, fancy Jaeger, wax cast brass This rear sight has a hidden dovetail base measuring .380" long, .712" wide, .050" deep. A thin fancy finial extends along the top flat of the barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.30".       RS-FJ-B . . . $12.99

Rear sight, fancy Jaeger, wax cast steel This rear sight has a hidden dovetail base measuring .380" long, .712" wide, .050" deep. A thin fancy finial extends along the top flat of the barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.30".       RS-FJ-I . . . $8.99

Rear sight, Traditional longrifle style for 13/16" or 7/8" octagon barrel, wax cast steel Sized to fit a longrifle or Kentucky pistol with a 13/16", or 7/8" octagon barrel. Made in the U.S.A., the dovetail is approximately .610" long, .540" wide, cut to a depth of .050" or this sight is ideal to be fitted in a lifted dovetail. Height from the bottom of the dovetail to the top of the sight notch is 0.27".       RS-G-354-14 . . . $8.99

Rear sight, Traditional longrifle style for 15/16" or 1" octagon barrel, wax cast steel Sized to fit a longrifle with a 15/16", or 1" octagon barrel. Made in the U.S.A., the dovetail is approximately .635" long, .585" wide, cut to a depth of .050" or this sight is ideal to be fitted in a lifted dovetail. Wax cast steel. Height from the bottom of the dovetail to the top of the sight notch is 0.29".       RS-G-354-16 . . . $8.99

Rear sight, feather finial for 13/16" or 7/8" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .530" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-14 . . . $8.99

Rear sight, feather finial for 15/16" or 1" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .585" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-16 . . . $8.99

Rear sight, adjustable Hawken style, with five step elevation riser, by L&R This adjustable sight has a .370" long by .580" wide dovetail spaced 3" ahead of the normal location. A great choice for your halfstock Hawken rifle, it works well on 15/16", 1" or 1-1/8" octagon barrels. Height from the top of the barrel to the top of the sight notch is 0.36" in the lowest setting. Not a fixed iron sight, it does not meet N.M.L.R.       RS-HA-5 . . . $60.00

Rear sight riser only, 5 step rear sight riser by L&R Lose your riser bar, or file it too much? Additional 5 step risers are available. Fits our Hawken adjustable rear sight #RS-HA-5.       RS-HA-5-RAMP . . . $9.50

Tang sight, Lyman No. 2 sight, for Henry Lever Action Rifles William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Henry lever action rifles. Lyman recommends this sight for the following models: H006 – Big Boy, Big Boy Carbine, Big Boy Silver H009 – All-Weather 30-30 H010 – All-Weather 45-70 H012 – Big Boy All W       RS-HENRY-2 . . . $112.99

has been added to your .

---