Tall Blade Front Sight , wax cast steel Wax cast, not polished, this small sight has a tall blade, made to be shortened during sight-in. It is an ideal casting for a H.E. Leman Indian Trade Rifle front sight or other styles of rifles, or pistols. Base is .375" long, .520" wide, .062" deep. The blade is .300" tall, .062" at the base tapering to .040". Cast steel.       FS-G-77-I . . . $9.79

Knapping hammer , for flint lock shooters, brass head, forged iron handle, overall length is 4-3/4", for resharpening gun flints instantly. This flint knapping hammer has a hand forged iron handle with a brass hammer head, for sharpening gun flints instantly. Overall length is about 4-3/4". Tie a leather lace or lanyard to the tail, to prevent it from becoming lost. Made for flint lock shooters, this hammer will sharpen the flint in your lock, instantly. NEVER sharpen the flint on a l       HAMMER-FLINT . . . $16.29

Build Track's H. E. Leman Indian Trade Rifle parts set , percussion, 1" octagon barrel, brass, iron, or traditional mixed trim Price: starting at $934.27 build Track's H. E. LEMAN Indian Trade Rifle Kit, easy to assemble, right hand, square tail percussion lock, 1" octagon, up to 36" barrel, brass, iron or mixed trim, plain or curly maple stock Build a replica H. E. Leman Indian Trade Rifle , using Track's best parts patterned from a antique Indian Trade Rifle. Options include choice of caliber, f

Western Holster, right hand, black leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the right, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in t       HOLSTER-WB-R . . . $33.99

Western Holster, left hand, brown leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the left, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in th       HOLSTER-WO-L . . . $29.99

Western Holster, right hand, brown leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the right, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in t       HOLSTER-WO-R . . . $29.99

Inlay , wrist oval, 1.08" by 0.94", brass 0.040" thick Wrist oval inlays, for longrifles and pistols. Oval is 1-1/16" tall, and 15/16" wide, and .040" thick sheet.       IN-WRIST-B . . . $1.20

Inlay , wrist oval, 1.08" by 0.94", nickel silver 0.040" thick Wrist oval inlays, for longrifles and pistols. Oval is 1-1/16" tall, and 15/16" wide, and .040" thick sheet.       IN-WRIST-S . . . $1.60

Pure Soft Lead , for hand casting round balls. Over 10 pounds per box, convenient small pieces Packed in a convenient small box, these pure soft lead pieces are a convenient size for your melting pot. Use hand cast pure lead balls and Minie bullets in black powder rifles, pistols, muskets, shotguns and fowling guns. To reduce your exposure to lead, do not smoke, drink, or eat while handling lead shot or ammunition. Wash your hands after hand       ITEM-10-LEAD . . . $26.99

Build Track's Jim Bridger's Hawken rifle , right hand, 1-1/8" tapered octagon barrel Price: starting at $1,125.16 Build Track's Jim Bridger's Hawken Rifle kit, 1-1/8" tapered octagon 36" barrel, traditional iron, or fancy brass trim, maple stock Track's very best Jim Bridger's Hawken Rifle parts were selected by the well respected gunmaker, Michael Hayes of Park Rapids, MN, who built the fine rifle with tapered octagon barrel, shown above. Stocked in curly

Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,256.59 Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas

Wedge Key, tiny, straight head, slotted for capture pin, wax cast brass This slotted wedge key measures .250" wide by .072" thick by 1.31" long beneath the head, with a .437" wide head. The head is straight, not slanted, for use on halfstock rifles, or the rear key on the forearm of a fullstock. Wax cast brass. Use our #KEY-60-S-B for a slanted head version of this key, for pistols or longrifle forends.       KEY-60-B . . . $8.99

Wedge Key, tiny, straight head, slotted for capture pin, wax cast steel This slotted wedge key measures .25" wide by .072" thick by 1.31" long beneath the head, with a .437" wide head. The head is straight, not slanted, for use on halfstock rifles, or the rear key on the forearm of a fullstock. Wax cast steel. Use our #KEY-60-S-I for a slanted head version of this key, for pistols or longrifle forends.       KEY-60-I . . . $6.59

Wedge Key, for Thompson Center Seneca, Cherokee, or Patriot, blued steel Wedge Key, for use with Thompson Center Seneca, Cherokee, or Patriot pistol. Key is 0.297" wide x 0.090" thick. Length beneath head is 1.26".       KEY-TC-SEN . . . $14.99

Build Track's Hawken fullstock plains rifle , 1" straight octagon barrel Price: starting at $1,143.58 Build Track's fullstock Hawken Rifle kit, 1" octagon 36" barrel, traditional iron, or fancy brass trim, maple or walnut stock Track's best fullstock Hawken Rifle parts were selected by the by noted gunmaker Fred Strom , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimmed wi

Build Track's 1792 Contract flintlock longrifle parts set, with 15/16" octagon barrel in .50, or .54 caliber Price: starting at $858.32 It is believed that the Model 1792 Contract Rifle was quite possibly the rifle issued to the Lewis & Clark expedition from the Harper's Ferry Arsenal for the Expedition of Discovery. Based on research in Man at Arms magazine by Frank A. Tait, and American Military Shoulder Arms by George Moller, a better picture of the 1792 Contract rifle has b

Gunsmithing Labor: drill and tap blind hole to install rib, per operation We drill and tap blind holes, usually 5-40, drill, counter-bore and mount the rib. Rifles usually require four(4) screws. Specify stock forend length. Forends are most often 13 to 16" length, while ribs are 24" length. Thus, they will fit a barrel of 37 to 40" length. Longer ribs available at extra cost. Half stock pistols require two mounting hole       LABOR-DT . . . $30.00

LEE Perfect Powder Measure , includes stand The metering chamber is the proper size for large rifle charges and the strike off opening small enough to work well with pistol size charges. The Lee Perfect Powder Measure works fine for charges from two grains to over 100 grains.       LEE-90058 . . . $25.99

LEE Long Charging Die Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). Works the same as the pistol powder through expanding die, except it doesn`t expand the case mouth. Rifle case expansion is done in the sizing die.       LEE-90194 . . . $13.79

Lee bullet mold , .45 Long Colt, 6 cavity, .452" diameter, 255 grain, round nose, flat point. six (6) cavity mold blocks, with cam-action sprue plate, requires Lee handles Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .45 bullets, .452" diameter, 255 grain, round nose flat point bullets, for your .45 Colt, .45 Schofield, .45 Auto Rim,       LEE-90349 . . . $56.99

Lee Bullet Mold , .45 Long Colt, .452" diameter, 228 grain, round nose solid base mold, six (6) cavity mold blocks, with cam-action sprue plate Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .45 bullets, .452" diameter, 228 grain, round nose sold base bullets, for your .45 Long Colt pistol or rifle cartridges       LEE-90352 . . . $56.99

Lee Bullet Mold , .45 caliber, .452" diameter, 200 grain, semi wad cutter mold, six (6) cavity mold blocks, for .45 Colt, .45 S&W Schofield, .45 ACP, .45 Auto Rim Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .45 bullets, .452" diameter , 200 grain, semi wad cutter, for your .45 Colt, .45 Schofield, .45 Auto Rim, and similar s       LEE-90379 . . . $38.50

Lee Bullet Mold , .40 Smith & Wesson, 10mm, .401" diameter, 175 grain, semi wad cutter, six (6) cavity mold blocks, with cam-action sprue plate, requires Lee handles Lee Six (6) Cavity Mold Blocks require our #LEE-HANDLE sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 .401" diameter, 175 grain, semi wad cutter, for your .40 Smith & Wesson, or 10mm pistol cartridges. Before you start, scrub the       LEE-90433 . . . $56.99

Lee Bullet Mold , 9mm, .38 super, .380 auto caliber, .356" diameter, 125 grain, round nose solid base mold, six (6) cavity mold blocks, with cam-action sprue plate Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .38 bullets, .356" diamter, 125 grain, round nose sold base bullets, for your 9mm, .38 Super, or .38 Auto pistol cartri       LEE-90457 . . . $56.99

Lee Bullet Mold , .38 caliber, 6 cavity, .358" diameter, 158 grain, flat nose solid base. six (6) cavity mold blocks, with cam-action sprue plate, requires Lee handles Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .38 bullets, .358" diamter, 158 grain, round nose flat point bullets, for your .38 Colt, .38 Special, .357 Magnum, and       LEE-90692 . . . $56.99

has been added to your .

---