Left Hand Tennessee Mountain Rifle , .40 caliber, 46" Rayl straight octagon barrel, Siler percussion lock, walnut, iron trim, used, marked C.D. Walker This attractive Southern Mountain rifle is stamped C.D. Walker on the top flat of the barrel. The rifle is stocked in straight grain walnut and trimmed in hand made iron furniture. Often referred to as a Tennessee style, this Southern rifle features a Siler mountain percussion lock mated to a .40 caliber by 46" straight octagon Rayl barrel. Not a       AAW-589 . . . $2,999.00

Build Track's Bedford flintlock longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,051.50 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Build Track's Hawken fullstock plains rifle , flintlock, with 1" straight octagon barrel up to 42" in length Price: starting at $1,204.19 Build Track's Early Hawken fullstock rifle parts set, 1" octagon barrel, up to 42" barrel, traditional iron trim, with maple stock Track's best early fullstock Hawken Rifle parts were selected by the by noted gunmaker J.E. Brown , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome.

Build Track's Early Tennessee longrifle kit , flintlock, traditional iron trim, with 15/16" octagon barrel in popular calibers Price: starting at $1,013.06 Build Track's Early Tennessee longrifle parts set, 36 or 42" octagon barrel, traditional iron trim, plain or fancy maple stock This attractive South Mountain flint longrifle is trimmed in iron, and stocked in curly maple. Often referred to as a Tennessee style, this Southern rifle is fitted with a correct English Durs Egg flint lock, by L&R. Orig

Build Track's Hawken fullstock plains rifle , 1" straight octagon barrel Price: starting at $1,145.28 Build Track's fullstock Hawken Rifle kit, 1" octagon 36" barrel, traditional iron, or fancy brass trim, maple or walnut stock Track's best fullstock Hawken Rifle parts were selected by the by noted gunmaker Fred Strom , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimmed wi

Build Track's 1792 Contract flintlock longrifle parts set, with 15/16" octagon barrel in .50, or .54 caliber Price: starting at $860.72 It is believed that the Model 1792 Contract Rifle was quite possibly the rifle issued to the Lewis & Clark expedition from the Harper's Ferry Arsenal for the Expedition of Discovery. Based on research in Man at Arms magazine by Frank A. Tait, and American Military Shoulder Arms by George Moller, a better picture of the 1792 Contract rifle has b

Allentown-Bethlehem pre shaped, non-inlet stocks, 13/16", 7/8", or 15/16" octagon 42" barrel This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Offered in three barrel channel sizes, 13/16", 7/8", or 15/16" straight octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M4 . . . $339.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M4 . . . $339.00

Stock, Allentown-Bethlehem , pre shaped, 15/16" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 15/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-15-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 15/16" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 15/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-15-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 15/16" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 15/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-15-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 15/16" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 15/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-15-M4 . . . $339.00

Allentown-Bethlehem , pre shaped, pre-inlet stocks, 13/16", & 7/8" octagon 42" barrel, cut for large Siler lock This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for either a 13/16”, or 7/8" straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full dep

stock, Allentown-Bethlehem , pre-inlet 13/16" octagon 42" barrel, large Siler lock, plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo       STK-ABI-13-M1 . . . $240.00

stock, Allentown-Bethlehem , pre-inlet 13/16" octagon 42" barrel, large Siler lock, fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo       STK-ABI-13-M3 . . . $329.00

stock, Allentown-Bethlehem , pre-inlet 13/16" octagon 42" barrel, large Siler lock, extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo       STK-ABI-13-M4 . . . $399.00

stock, Allentown-Bethlehem , pre-inlet 7/8" octagon 42" barrel, large Siler lock, plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 7/8” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet for       STK-ABI-14-M1 . . . $240.00

stock, Allentown-Bethlehem , pre-inlet 7/8" octagon 42" barrel, large Siler lock, fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 7/8” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet for       STK-ABI-14-M3 . . . $329.00

has been added to your .

---