Your search for '文兴宇 文革期间'
returned
5,649 results.
|
Lyman Brass Polish , 5 oz. bottle
Turbo Brite Brass Polish is ideal for use as an additive when using untreated Corncob or Nutshell media. Also works with treated media to bring brass to a high luster shine.
|
|
Lyman Brass Smith Powder Measure
Whether dropping charges for small pistol cases or large rifle cases, this measure gives consistent and accurate performance. The CNC machined steel metering cylinder features a micrometer adjustable thimble with reference lines so resetting the measure is easy. The reservoir is equipped with a powder baffle which maintains a consistent powder leve
|
|
Lyman Brass Smith Powder Measure Stand
The Brass Smith Powder Measure Stand can be mounted firmly to either a bench top or to a wall. Features standard 7/8-14 threads and will raise any measure high enough to easily position cases beneath the powder drop tube. Made of die cast aluminum. Stand is 6-5/8" from foot to bottom of threaded arm when installed on a bench
|
|
Lyman Ineria Bullet Puller
Safely strips loaded rounds in seconds without damage to bullet or case. Traps components with just a few raps on the bench. Three jaw chuck fit all cartridges from .22 thru .45. Made of tough polycarbonate
|
|
Stainless Electronic Digital Caliper
Electronic caliper features a high tech design with direct digital readout. Switch back and forth from inches to millimeters with a touch of a button. All new hold setting plus on/off switch. Accurate to .001"/0.1mm. Comes in a handy plastic storage case.
|
|
Case Lube Pad , by Lyman
Large cloth lubricating pad in a plastic case dispenses lube evenly. Be sure to order case lube, sold separately.
|
|
Case Deburring Tool , fits .17 to .45 caliber
This large size deburring tool was designed for inside and outside deburring of cartridge cases from .17 caliber to .45 caliber. Ideal for the black powder cartridge shooters. The 30 degree angle cutter bevels inside the mouth of the case allowing the bullets to slide in without deforming.
|
|
Lyman Two Die Set , for .30-30 Winchester
Set consists of a full length resizing die with decapping stem and neck expanding button and a bullet seating die. These die sets are the reloader's best choice for loading jacketed bullets in bottlenecked rifle cases. For those who load cast bullets, we suggest the addition of a neck expanding die, sold separately.
|
|
Lyman Three Die Set , for .38-55 Winchester
Straight wall rifle cases require these three die sets consisting of a full length resizing die with decapping stem, a two step neck expanding "M" die and a bullet seating die.
|
|
Lyman Three Die Set , for .45-70 Government
Straight wall rifle cases require these three die sets consisting of a full length resizing die with decapping stem, a two step neck expanding "M" die and a bullet seating die.
|
|
Lyman Taper Crimp Die , for .45-70 to .45-100 caliber
Many black powder cartridge rifle loads require compression for proper ignition. Firm neck tension helps provide compression. Taper Crimp Dies have minimum taper, allowing you to apply proper neck tension, without damaging the bullet, for best accuracy.
|
|
|
Lyman Three Die Set , for .50-70 Government
Straight cartridge cases require three die sets, consisting of a full length resizing die with decapping stem, a neck expanding die, and a bullet seating die. Made in the USA, stock the Lyman dies for .50-70 Government. This early cartridge was used on Trapdoor Springfield rifles, Sharps rifles, Remington Rolling Block rifles, and many others. Also
|
|
Flash Hole Uniformer , by Lyman
This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted in the flash hole through the neck case. Adjustable stop collar allows use with any size case.
|