Taps , high carbon steel, 5/16-18 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 5/16-24 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 5/16-32 thread Used almost exclusively for the 5/16-32 White Lightnin touch hole liner. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch

Taps , high carbon steel, 3/8-16 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 3/8-24 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 3/8-32 thread Used almost exclusively for the 3/8-32 White Lightnin touch hole liner. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch.

Taps , high carbon steel, 9/16-18 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 5/8-18 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Taps , high carbon steel, 3/4-16 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

Tap handle , accepts #0 to #8 diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from #0 to #8 in diameter in the recessed fingers in the jaws. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps       TAP-W-0 . . . $7.99

Tap handle , accepts #10 to 1/4" diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from #10 to 1/4" in diameter. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken th       TAP-W-10 . . . $9.99

Tap handle , accepts 1/4" to 1/2" diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from 1/4" to 1/2" in diameter. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken t       TAP-W-14 . . . $11.99

British Military Tomahawk , 2-3/4" edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. Our British Ordnance axe is copied from an original found at a 1755 British camp site in Pennsylvania, and shown on page 100 of the book A Soldier-Like Way by Ryan Gale. This simple wax cast alloy steel blade has a 14 oz. head measuring 5-5/8" tall, which includes a 1-1/2" long, 1" wide, by 1/2" hammer head, and a 3-1/2" long blade with a 2-3/4"       TOMAHAWK-BRITISH . . . $50.29

British Military Tomahawk , 2-3/4" edge, 4140 alloy steel, 22" tapered hickory handle, made in the U.S.A. Our British Ordnance axe is copied from an original found at a 1755 British camp site in Pennsylvania, and shown on page 100 of the book A Soldier-Like Way by Ryan Gale. This simple wax cast alloy steel blade has a 14 oz. head measuring 5-5/8" tall, which includes a 1-1/2" long, 1" wide, by 1/2" hammer head, and a 3-1/2" long blade with a 2-3/4"       TOMAHAWK-BRITISH-GH . . . $58.99

Francisca Tomahawk , 4" cutting edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. An unusual sweeping blade with deep socket to reinforce the handle, it predates the French and Indian War. This sophisticated design was difficult to forge. The 4" edge must be sharpened before use, and the handle trimmed to match the upper arc. The head weighs just under 1 pound. The blade edge is just over 4" in arc length, the NMLRA legal limit.       TOMAHAWK-FRANCISCA . . . $50.29

Iroquois Tomahawk , 2-7/8" edge, wax cast 4140 steel, cast-in correct period floral engraving, tapered hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast of 4140 alloy steel. The 6-1/4" head has a 2-7/8" edge. This head design will accept our standard 18" hickory handle, with little or no fitting. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few lon       TOMAHAWK-IR . . . $39.99

Iroquois Tomahawk , 2-7/8" edge, wax cast 4140 steel, cast-in correct period floral engraving, 22" tapered hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast of 4140 alloy steel. The 6-1/4" head has a 2-7/8" edge. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few long strokes of a fine file. Polish the blade surfaces by hand, using fine emery paper or f       TOMAHAWK-IR-GH . . . $51.98

Large Heart Tomahawk , 4" cutting edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. In response to the demand for a "prettier" primitive tomahawk, we have added this pierced heart design. The weeping heart is a Pennsylvania Deutsch hex design, found on painted chests and longrifles. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made i       TOMAHAWK-LH . . . $50.29

Large Heart Tomahawk , 4" cutting edge, 4140 alloy steel, 22" tapered hickory handle, made in the U.S.A. In response to the demand for a "prettier" primitive tomahawk, we have added this pierced heart design. The weeping heart is a Pennsylvania Deutsch hex design, found on painted chests and longrifles. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made i       TOMAHAWK-LH-GH . . . $54.79

Medieval Tomahawk , 5-3/8" blade, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. Our largest! This big tomahawk is inspired by the bearded axe used in Medieval Europe. It will be a winner in strong hands. The massive 1.8 pound head will cause the tomahawk to spin slowly when thrown hard. The tomahawk head has a long reinforced eye design. The blade edge is over the 4" in arc length for NMLRA tomahawk throwing events. It require       TOMAHAWK-ME . . . $50.29

New Reliable Tomahawk , 4" cutting edge, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. Our most popular throwing 'hawk, sometimes called the "octagon tomahawk" because of the decorative flats on it's carbon cutlery steel blade. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made in the U.S.A. wax cast of tempered 4140 alloy steel, a few l       TOMAHAWK-NR . . . $50.29

New Reliable Tomahawk , 4" cutting edge, 4140 alloy steel, 22" tapered hickory handle. made in the U.S.A. Our most popular throwing 'hawk, sometimes called the "octagon tomahawk" because of the decorative flats on it's carbon cutlery steel blade. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made in the U.S.A. wax cast of tempered 4140 alloy steel, a few l       TOMAHAWK-NR-GH . . . $54.79

Old Reliable Tomahawk , 3-1/2" cutting edge, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. A very popular throwing tomahawk. The cast alloy steel blade is hard enough to endure competition. Oval teardrop eye is fitted to our best tapered straight grain hickory handle. The head weighs just under 1 pound. The blade edge is just over 3-1/2" in arc length, below the NMLRA legal limit. It requires quick sharpening before use, to qualify for N       TOMAHAWK-OR . . . $50.29

Old Reliable Tomahawk , 3-1/2" cutting edge, 4140 alloy steel, 22" tapered hickory handle. made in the U.S.A. A very popular throwing tomahawk. The cast 4140 alloy steel blade is hard enough to endure competition and the head weighs just under 1 pound. Includes our 22" hickory Carlos Gove pattern tomahawk handle with a swell along the bottom. Sanded smooth, this handle is ready for stain or oil finishing, if desired. For competion throwing we would recomm       TOMAHAWK-OR-GH . . . $54.79

Tiny Tomahawk, 3-1/4" cutting edge, 4140 alloy steel, with 16" tapered hickory handle, made in the USA A miniature tomahawk similar to our popular full size "New Reliable" tomahawk, but much smaller. It accepts our "tiny" hickory handle. Sturdy 4140 wax cast alloy steel blade, it will endure all the abuse small hands can muster. This head weighs 6/10's of a pound. The blade is 3-1/4", measured along the arc. Comes with a unfinished hickory handle. M       TOMAHAWK-TH . . . $50.29

has been added to your .

---