Early Tennessee , pre shaped, non-inlet, stock 15/16" octagon, 42" barrel We offer our early Tennessee stock with 15/16” octagon barrel channel for any 42” straight octagon barrel, and 3/8” ramrod hole, with no lock or trigger mortise cut. You may select and hand inlet your favorite lock and trigger. Buttplate is not cut, so you may adjust the trigger reach to your desired length, up to 15 inches, or create a poor-boy ri

Stock, Early Tennessee , pre shaped, non-inlet, 15/16" octagon, 42" barrel, plain maple We offer our early Tennessee stock with 15/16” octagon barrel channel for any 42” straight octagon barrel, and 3/8” ramrod hole, with no lock or trigger mortise cut. You may select and hand inlet your favorite lock and trigger. Buttplate is not cut, so you may adjust the trigger reach to your desired length, up to 15 inches, or create a poor-boy ri       STK-ET-15-M1 . . . $179.00

Stock, Early Tennessee , pre shaped, non-inlet, 15/16" octagon, 42" barrel, fancy maple We offer our early Tennessee stock with 15/16” octagon barrel channel for any 42” straight octagon barrel, and 3/8” ramrod hole, with no lock or trigger mortise cut. You may select and hand inlet your favorite lock and trigger. Buttplate is not cut, so you may adjust the trigger reach to your desired length, up to 15 inches, or create a poor-boy ri       STK-ET-15-M3 . . . $269.00

Stock, Early Tennessee , pre shaped, non-inlet, 15/16" octagon, 42" barrel, extra fancy maple We offer our early Tennessee stock with 15/16” octagon barrel channel for any 42” straight octagon barrel, and 3/8” ramrod hole, with no lock or trigger mortise cut. You may select and hand inlet your favorite lock and trigger. Buttplate is not cut, so you may adjust the trigger reach to your desired length, up to 15 inches, or create a poor-boy ri       STK-ET-15-M4 . . . $339.00

Southern Mountain Rifle , .45 caliber, 42" Rice swamped barrel, Chambers' Ketland lock, curly maple, hand forged iron trim, as new, signed L. Wise This attractive Southern Mountain rifle is stocked in very curly maple with a deep cherry red stain and patina finished hand forged iron furniture. Often referred to as a Tennessee style, antique Tennessee flint rifles were often equipped with imported English locks, this Southern rifle is fitted with a late Ketland flintlock by Jim Chambers. The R       AAV-615 . . .

Barrel, 20 gauge, Fowler , .620" smooth bore, 44" octagon-to-round, "C" profile, 4.2 lb, flared tang plug, made in the U.S.A. Made with pride in the U.S.A. to meed the demands of today's shooters. Our 44" smooth bore fowler barrel is made for fullstock flint fowling guns, fusils, and muskets. The 20 gauge bore is .620" diameter, ideal for a patched round ball, or lead or bismuth shot with wads and cards. The tapered octagon breech is 15" long, with a wedding band transiti       BBL-FOWL-20-44 . . . $279.00

Bedford County , pre shaped, pre-inlet stocks, 13/16", or 7/8" octagon 42" barrel, L&R Bedford lock Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

stock, Bedford County , pre-inlet, 13/16" octagon 42" barrel, L&R Bedford lock, plain maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-13-M1 . . . $279.00

stock, Bedford County , pre-inlet, 13/16" octagon 42" barrel, L&R Bedford lock, fancy maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-13-M3 . . . $315.00

stock, Bedford County , pre-inlet 13/16" octagon 42" barrel, L&R Bedford lock, extra fancy maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-13-M4 . . . $399.00

stock, Bedford County , pre-inlet 7/8" octagon 42" barrel, L&R Bedford lock, plain maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-14-M1 . . . $279.00

stock, Bedford County , pre-inlet 7/8" octagon 42" barrel, L&R Bedford lock, fancy maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-14-M3 . . . $315.00

stock, Bedford County , pre-inlet 7/8" octagon 42" barrel, L&R Bedford lock, extra fancy maple Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       STK-BED-14-M4 . . . $399.00

Canoe Gun , 20 gauge, 24" octagon-to-round barrel, Chambers' English flintlock, maple, iron, used This short barreled canoe guns is stocked in maple with a round faced flintlock. Made without a rear sight, this gun qualifies for NMLRA trade gun match events, shooting patched round balls at paper targets, and shot charges at clay birds. It will be a powerful short range hunting gun, very handy when hunting from a boat or in thick brush. Trigger       AAV-691 . . .

Kentucky Flint Pistol .45 caliber, 10" barrel, maple stock, iron trim, small Siler lock, used Neatly fitted this well made Kentucky pistol is unsigned. Stocked in a nice piece of curly maple the pistol is browned iron furniture with a light patina. The 10" straight octagon Green Mountain Barrel Company has been draw filed smooth and finished to a blue with a gray undertone. The .45 caliber bore is mirror bright, cut rifled with eight lands       AAV-676 . . . $1,569.00

CVA Frontier Carbine , .50 caliber, 24" barrel, percussion, beech, brass, used, by Connecticut Valley Arms This CVA Frontier Carbine is stocked in beech, finished as maple, trimmed in brass furniture, and fitted with adjustable sights. The stock has a few scattered handling marks from use. The bore of this rifle is bright and has been well maintained. This .50 caliber rifle is short, light, and will be handy to carry in the deep woods. The trigger reach       AAV-783 . . .

Recreating the American Longrifle by William Buchele, George Shumway, Peter Alexander The late William Buchele was recognized as a true master longrifle maker. But his greatest contribution to muzzle loading must be this book. He shares the step by step details of his craft. His work has been enhanced by the editors. This book does not assume that the reader is an expert stock maker, but begins with illustrated explanations of the b       BOOK-RAL . . . $36.99

California Halfstock Rifle .54 caliber, 32" G.R. Douglas barrel, bird's eye maple, engraved brass, percussion, signed Jms. Tawney This California style halfstock rifle is stocked in figured bird's eye maple and trimmed in engraved brass furniture with a nickel silver forend cap. The rifle is fitted with hooked breech, percussion lock, and double set triggers. The G.R. Douglas barrel and Harold Robbins lock would indicate that this rifle was assembled in the 1970's or 80's and       AAV-816 . . .

The 45-70 Springfield , 5th Edition, Revised and Expanded, a detailed reference guide, by Joe Poyer and Craig Riesch A part-by-part examination of the trapdoor Springfield rifle and carbine, with illustrations showing the variations found within serial number ranges. Parts from various models became mixed, as arms were returned to the arsenal, for repair or upgrade. Learn if your 45-70 Springfield is assembled from the correct as-issued parts. An important refere       BOOK-45-70-S . . . $32.50

Early Southern Mountain Rifle , .40 caliber, 46" swamped barrel, TRS flintlock, maple, brass trim, used This Early Southern Mountain longrifle is stocked in maple with limited brass trim in true "Poor Boy Fashion." This rifle represents a working man's gun, made from recycled parts, at a time when nothing went to waste on the frontier. The rifle features a .40 caliber swamped barrel that measures 46" long. The bore has been well maintained and is rea       AAV-424 . . . $3,299.00

American Fowling Gun , 12 gauge 44" octagon-to-round Colerain barrel, early Ketland flint lock, maple, brass, by Nathan McKenzie Based on the original fowling guns produced in New England from 1740 to 1780 which recycled parts from earlier muskets. This piece is signed by contemporary builder Mr. Nathan McKenzie and has a blend of French and English styled parts. For more information on similar American fowling guns, we recommend the book Flintlock Fowlers, The First Guns M       AAV-821 . . .

CVA Mountain Rifle , .54 caliber, 32" barrel, flintlock, maple, iron trim, used, by Connecticut Valley Arms This CVA Mountain Rifle is stocked in birdseye maple, trimmed in browned iron furniture, and decorated with nickel silver oval inlays. This rifle was originally factory assembled as a percussion gun, but has now been converted to flintlock. The percussion drum has been removed and a large vent liner has been fitted. The CVA flint lock is factory en       AAV-820 . . .

Hawken Rifle , .58 caliber 36" Moody Metal Works barrel, percussion, iron trim, walnut, new, unfired, by George Nelson Stocked in walnut, this classic percussion halfstock Hawken rifle is trimmed with traditional Hawken iron furniture. The 36" barrel and iron trim are finished to a dark brown. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel. allowing instant take-down, for easy cleaning. This rifle was assembled by contemporary       AAV-702 . . . $3,099.00

Pennsylvania Longrifle , .50 caliber, 42" Rice swamped barrel, Chamber's Golden Age flintlock, maple, brass trim, used Stocked in dark stained maple, this flint longrifle is trimmed in patina finished brass furniture with hand engraved accents. The .50 caliber Rice 42" swamped octagon barrel is mated to a Jim Chambers Golden Age flintlock. The bore is bright and ready to shoot. Offered in used condition, the stock and barrel finish have a few minor handling marks.       AAV-719 . . .

Bucks County Longrifle , .50 caliber, 42" Colerain barrel, L&R flint lock, curly maple, brass trim, used Styled after the late 18th century firearms that evolved in the Bucks County region of Pennsylvania. This gun features a side opening patchbox commonly found on this style of rifle. The .50 caliber bore is bright, clean, and ready to shoot. This rifle is offered as used, with some inletting gaps and excess wood in areas. Weighing in at 9.3 pounds t       AAV-662 . . . $799.00

has been added to your .

---