Early Ketland Flint Lock, with pan bridle, by Jim Chambers Early Ketland Flint Lock This flat faced English flint lock is made in the style of the early work of Thomas Ketland, for use on traditional American longrifles and English fowling guns of the 1750-1780 era. Unmarked, you might engrave KETLAND in block letters ahead of the cock, as many old locks were marked. A few locks also had simple floral       LOCK-EK-FRB . . . $320.00

cock , 1.67" throw, wax cast steel, tapped 1/4-20 thread cock , 1.67" throw, wax cast steel, tapped 1/4-20 thread       LOCK-EK-FR-CO . . . $41.50

frizzen , wax cast steel, as cast, temper after fitting frizzen , wax cast steel, as cast, temper after fitting       LOCK-EK-FR-FR . . . $20.00

frizzen spring , point finial, front mount, for 8-32 screw frizzen spring , point finial, front mount, for 8-32 screw       LOCK-EK-FR-FS . . . $25.50

frizzen screw , shouldered for pan without bridle, .79" long, 10-32 thread frizzen screw , shouldered for pan without bridle, .79" long, 10-32 thread       LOCK-EK-FR-FX . . . $3.99

top jaw , wax cast steel, .82" x 1.00" with alignment stud top jaw , wax cast steel, .82" x 1.00" with alignment stud       LOCK-EK-FR-TJ . . . $18.00

Enfield Rifle Lock , circa 1853 Crown P-H mark, unused, excellent Made for use on an 1853 Enfield Rifle Musket, this new lock has been drilled for two lock bolts, but never tapped, never installed on a replica Enfield three band rifled musket. Probably made after 1979 for a replica of the Enfield Musket issued to the East India Company, the lock is finished to a dark blue. The hammer and lock plate are engraved w       LOCK-ENFIELD . . . $79.99

Flint Lock , French Tulle Fusil de Chasse , with A. TVLLE marking Tulle, France was well known for producing the popular hunting gun for trade to American and Canadian natives, French Colonials, and hunters during the early 18th century in the North American Colony of New France. These fusil de chasse were lighter and handier than contemporary French infantry muskets, making it better suited for traveling long di       LOCK-FUSIL . . . $279.00

Bridle , wax cast steel, machined Bridle, French TVLLE fusil & NW lock, flint, right hand, wax cast steel, machined, made in the USA by Track       LOCK-FUSIL-BR . . . $16.00

Flint Cock , 1.57" throw, wax cast steel, as cast Flint Cock , 1.57" throw, wax cast steel, as cast, made in the U.S.A.       LOCK-FUSIL-CO . . . $29.99

Flash Guard Frizzen Screw & Nut , for French Fusil flintlocks, 8-32 thread, square nut, allows use of flint flash guards on bridleless lock This 8-32 frizzen screw will allow the use of the large flint flash guards on the French Fusil flintlock and other bridleless flintlocks.that use a 8-32 frizzen screw. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where fli       LOCK-FUSIL-FGX . . . $6.98

Frizzen , wax cast steel, as cast, temper after fitting Frizzen , wax cast steel, as cast, temper after fitting, made in the U.S.A.       LOCK-FUSIL-FR . . . $29.99

Frizzen spring , wax cast steel, tempered, use 8-32 screw Frizzen spring , wax cast steel, tempered, use 8-32 screw, made in the U.S.A.       LOCK-FUSIL-FS . . . $25.50

Frizzen spring screw , .52" length, 8-32 thread Frizzen spring screw , .52" length, 8-32 thread, made in the U.S.A.       LOCK-FUSIL-FSX . . . $3.79

Frizzen screw , .70" length, 8-32 thread Frizzen screw , .70" length, 8-32 thread, made in the U.S.A.       LOCK-FUSIL-FX . . . $3.79

Mainspring , wax cast steel, tempered Mainspring for TVLLE fusil flint lock, right, 1095 tempered steel, made in the U.S.A.       LOCK-FUSIL-MS . . . $25.50

Lock plate , wax cast steel, 5.8" x .98", as cast with A. TVLLE marking Lock plate , wax cast steel, 5.8" x .98", as cast with A. TVLLE marking, made in the U.S.A.       LOCK-FUSIL-PL . . . $29.99

Sear , for TVLLE fusil lock, wax cast steel, tempered, use 8-32 screw Sear, for TVLLE fusil lock, tempered wax cast steel, as-cast, made in the USA       LOCK-FUSIL-SE . . . $17.99

Sear spring , wax cast steel, tempered, long upper arm Sear spring for French TVLLE Fusil & N.W. flint lock, tempered steel, made in the USA by Track       LOCK-FUSIL-SS . . . $14.99

Sear spring screw , .400" length, 8-32 thread Sear spring screw, 8-32 thread for LOCK-FUSIL       LOCK-FUSIL-SSX . . . $3.79

Top jaw , .88 x 1.1", wax cast steel, .26" hole, as cast Top jaw , .88 x 1.1", wax cast steel, .26" hole, as cast, made in the U.S.A.       LOCK-FUSIL-TJ . . . $7.99

Top jaw screw , 1/4-20 thread, slotted Top jaw screw , 1/4-20 thread, slotted, made in the U.S.A.       LOCK-FUSIL-TJX . . . $6.89

Tumbler , machined steel, hardened and tempered Tumbler , machined steel, hardened and tempered, no fly pocket - use with single trigger only.       LOCK-FUSIL-TU . . . $25.00

Tumbler screw , .62" domed, 8-32 thread Tumbler screw , .62" domed, 8-32 thread, made in the U.S.A.       LOCK-FUSIL-TX . . . $4.79

Golden Age Percussion Conversion Lock, by Jim Chambers A true conversion, this percussion lock retains the pan molding, flash fence, and hole for frizzen pivot screw. Converted original locks often have an empty hole, or tap the hole and plug it with a screw. Parts and screws are the same as on the flint lock, except for the cap lock’s unique plate, pan bolster, and the percussion hammer. This is a fin       LOCK-GA-CR . . . $245.00

has been added to your .

---