Nipples

Items Per Page:
|< First < Previous Viewing page 3 of 3 Next > Last >|
1  | 2  | 3
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original:

    Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after each day's use, as original. Coat the nipple threads with Birchwood Casey's Choke Tube Lubricant to allow easy removal, even after a long day of competition shooting.
    Discard the factory made blued steel nipples supplied on imported replica guns, especially revolvers. Made to fit some unknown European cap, they have too much taper to prevent cap fragments from falling into the hammer notch, jamming your revolver. Our nipples fit CCI & RWS No. 11 standard caps correctly.

Track's 416 stainless steel nipples:

    Made from 416 alloy (12% Chromium), the first free machining stainless alloy with Martensitic qualities (hardenable, tempers normally, and is magnetic unlike most stainless alloys). Stronger, tougher, more resistant to battering, 416 alloy is longer lasting than the famous old Ampco bronze nipples, now obsolete.
    Truly precision turned, our nipples have tapered cones made to perfectly fit the CCI brand No. 11 standard cap, or the identical Dynamit - Nobel RWS brand No. 1075 (red label) cap. Remington No. 11 caps are a tiny bit larger, an easy fit. Track has improved the fit, and extended the life of our percussion nipples.

    The values shown for the overall length, thread journal length, and diameter of the base are ideal values and may vary slightly due to machining tolerances. We have noted a wide variety of nipple threads and lengths used on imported rifles and percussion revolvers, even on the same model from the same maker. We recommend confirming the thread, overall length, thread journal length, base diameter, and comparing the cone length. Cone length = overall length minus thread journal length. The cone length must be similar in length to the original nipple to assure good function especially in percussion revolvers.

Oversize threaded nipple, .270-28, 
1/4-28 with .020" oversize thread,
for CCI #11 cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Oversize threaded nipple, .270-28, 1/4-28 with .020" oversize thread, for CCI #11 cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: ROS-20-S
Availability: In Stock
Price: $5.99
Order Quantity:
Oversize threaded nipple, .275-28,
1/4-28 with .025" oversize thread, 
for CCI #11 cap, hardened steel,
square shank, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Oversize threaded nipple, .275-28, 1/4-28 with .025" oversize thread, for CCI #11 cap, hardened steel, square shank, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: ROS-25-I
Availability: In Stock
Price: $5.99
Order Quantity:
Oversize threaded nipple, .275-28, 
1/4-28 with .025" oversize thread,
for CCI #11 cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Oversize threaded nipple, .275-28, 1/4-28 with .025" oversize thread, for CCI #11 cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: ROS-25-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread for rifle, with cone for military musket cap, stainless steel, requires NW-100 musket nipple wrench

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread for rifle, with cone for military musket cap, stainless steel, requires NW-100 musket nipple wrench
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-MS
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolvers by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, hardened steel

Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolvers by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, hardened steel
  • Cone length: 0.400"
  • Thread journal length: 0.225"
  • Overall length: 0.625"
  • Diameter of base: 0.307"
Part Number: RST-WI
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 1/4-28 thread, .430" long cone for some Colt brand Colt 1847 Walker & Dragoon revolvers, for #11 CCI cap, stainless steel

Cone length: 0.430" Thread journal length: 0.225" Overall length: 0.655" Diameter of base: 0.310"
Nipple, 1/4-28 thread, .430" long cone for some Colt brand Colt 1847 Walker & Dragoon revolvers, for #11 CCI cap, stainless steel
  • Cone length: 0.430"
  • Thread journal length: 0.225"
  • Overall length: 0.655"
  • Diameter of base: 0.310"
Part Number: RST-WLS
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolver by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, stainless steel

Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolver by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, stainless steel
  • Cone length: 0.400"
  • Thread journal length: 0.225"
  • Overall length: 0.625"
  • Diameter of base: 0.307"
Part Number: RST-WS
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, .220-32 thread, for #11 CCI cap, square shank, stainless steel for Amazonas shotgun

Cone length: 0.493" Thread journal length: 0.160" Overall length: 0.653" Diameter of base: 0.302"
Nipple, .220-32 thread, for #11 CCI cap, square shank, stainless steel for Amazonas shotgun
  • Cone length: 0.493"
  • Thread journal length: 0.160"
  • Overall length: 0.653"
  • Diameter of base: 0.302"
Part Number: S-AMAZONAS-S
Availability: In Stock
Price: $7.99
Order Quantity:
Nipple, 9/32-26 BSF thread, for #11 CCI cap, stainless steel for Jodhpur shotgun

Cone length: 0.435" Thread journal length: 0.200" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 9/32-26 BSF thread, for #11 CCI cap, stainless steel for Jodhpur shotgun
  • Cone length: 0.435"
  • Thread journal length: 0.200"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: SD-S
Availability: In Stock
Price: $7.99
Order Quantity:
Underhammer nipple, 1/4-28 thread, 5/16" long, for #11 CCI cap, stainless steel

Cone length: 0.438" Thread journal length: 0.312" Overall length: 0.750" Diameter of base: 0.307"
Underhammer nipple, 1/4-28 thread, 5/16" long, for #11 CCI cap, stainless steel
  • Cone length: 0.438"
  • Thread journal length: 0.312"
  • Overall length: 0.750"
  • Diameter of base: 0.307"
Part Number: UHC-5S
Availability: In Stock
Price: $6.99
Order Quantity:
Underhammer nipple, 1/4-28 thread, 3/8" long, for #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.375" Overall length: 0.815" Diameter of base: 0.307"
Underhammer nipple, 1/4-28 thread, 3/8" long, for #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.375"
  • Overall length: 0.815"
  • Diameter of base: 0.307"
Part Number: UHC-6S
Availability: In Stock
Price: $7.99
Order Quantity:
Underhammer nipple, 1/4-28 thread, 7/16" long, for #11 CCI cap, stainless steel

Cone length: 0.442" Thread journal length: 0.438" Overall length: 0.880" Diameter of base: 0.307"
Underhammer nipple, 1/4-28 thread, 7/16" long, for #11 CCI cap, stainless steel
  • Cone length: 0.442"
  • Thread journal length: 0.438"
  • Overall length: 0.880"
  • Diameter of base: 0.307"
Part Number: UHC-7S
Availability: In Stock
Price: $7.99
Order Quantity:
Underhammer nipple, 1/4-32 thread, 5/16" long, for #11 CCI cap, stainless steel

Cone length: 0.438" Thread journal length: 0.312" Overall length: 0.750" Diameter of base: 0.307"
Underhammer nipple, 1/4-32 thread, 5/16" long, for #11 CCI cap, stainless steel
  • Cone length: 0.438"
  • Thread journal length: 0.312"
  • Overall length: 0.750"
  • Diameter of base: 0.307"
Part Number: UHF-5S
Availability: In Stock
Price: $7.99
Order Quantity:
Underhammer nipple, 1/4-32 thread, 3/8" long, for #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.375" Overall length: 0.815" Diameter of base: 0.307"
Underhammer nipple, 1/4-32 thread, 3/8" long, for #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.375"
  • Overall length: 0.815"
  • Diameter of base: 0.307"
Part Number: UHF-6S
Availability: In Stock
Price: $7.99
Order Quantity:
Underhammer nipple, 1/4-32 thread, 7/16" long, for #11 CCI cap, stainless steel

Cone length: 0.442" Thread journal length: 0.438" Overall length: 0.880" Diameter of base: 0.307"
Underhammer nipple, 1/4-32 thread, 7/16" long, for #11 CCI cap, stainless steel
  • Cone length: 0.442"
  • Thread journal length: 0.438"
  • Overall length: 0.880"
  • Diameter of base: 0.307"
Part Number: UHF-7S
Availability: In Stock
Price: $7.99
Order Quantity:
|< First < Previous Viewing page 3 of 3 Next > Last >|
1  | 2  | 3
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards