Holster Pistol, .50 caliber, 10" octagon-to-round barrel, TRS flintlock, walnut, brass trim, new, by Ken Brady

Home > Guns > Flintlock guns > Flintlock military guns

Holster Pistol,
.50 caliber, 10" octagon-to-round barrel,
TRS flintlock, walnut, brass trim,
new, by Ken Brady

Part Number:	AAW-610
Availability:
Price:	$2,699.00
Order Quantity:

This holster pistol by builder Ken Brady is stocked in walnut and trimmed in brass furniture. The Germanic style flintlock by The Rifle Shoppe is mated to a .50 caliber rifled octagon-to-round barrel. This pistol is offered in new condition with a bright bore that is ready to shoot. This pistol will be of great interest to the French and Indian War or Revolutionary War reenactor. The pistol weighs 2.7 pounds.

From above the 10" octagon-to-round barrel can be seen. The barrel is octagon the first 2" before transitioning to sixteen flats with a single wedding band before tapering round with a flare at the muzzle. The .50 caliber bore is rifled with five equal size lands and grooves with a slow twist for patched round ball. No sights are fitted, nor are any expected on this style of holster pistol. At the rear of the barrel the flared tang can be seen. A single tang bolt engages the tang on top and a square nut is inlet into the stock below, as is proper on such a gun. Two small iron pins retain the barrel to the forearm.

The walnut stock has been stained a medium brown and was finished with a gloss varnish that was then rubbed back to produce the satin sheen now visible on the gun. Behind the tang the grip of the pistol drops quickly away from the level of the barrel. The grip is adorned with a brass thumbpiece. Our bottom view shows off the brass grip cap, long triggerguard, as well as the ramrod pipes. The wooden ramrod is fitted with a flared brass loading tip. We recommend #PL-6 to service this pistol. The backside view of the gun shows the decorative brass sideplate, and two lock bolts that pass through to engage the lock opposite, holding both lock and sideplate in position. Note the extension of the grip cap that runs up both sides of the wrist, a common feature on military pistols of the time.

The Germanic style flintlock by The Rifle Shoppe is marked Caspar Peter below the pan. The plate and cock have cast-in floral engraving, and the tail is engraved with a goat. Properly assembled the lock has strong springs and should spark nicely, the frizzen only shows signs of having been sparked once or twice for testing. A vent hole has been directly drilled into the barrel to give the priming flash a straight path to the main charge.

This pistol will be perfect for you next French and Indian War or Revolutionary War reenactment. The bore is clean and ready to shoot for a fun day at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$19.29
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-50-10
Availability:
Price:	$3.99
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$4.29
Order Quantity:

English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-6
Availability:
Price:	$3.70

Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-6-PACK-12
Availability:
Price:	$43.00

Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread

Part Number:	FS-50-10
Availability:
Price:	$4.09
Order Quantity:

Powder Horn, large, 11 to 14", with antique patina finish

Part Number:	HORN-A-L
Availability:
Price:	$74.50
Order Quantity:

Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-50-7-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 50 grains, with spout

Part Number:	MAS-050
Availability:
Price:	$19.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Spring steel nipple pick, with bone bead handle

Part Number:	PICK-NIPPLE
Availability:
Price:	$3.59
Order Quantity:

Pistol loading rod and short starter with .50 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag

Part Number:	PL-7-50
Availability:
Price:	$19.58
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock military guns