1860 Colt Army Revolver, .44 caliber, 8" barrel, full fluted cylinder, cased with accessories, used, by COLT brand - Second Generation

Home > Guns > Percussion guns > Percussion pistols & revolvers

1860 Colt Army Revolver,
.44 caliber, 8" barrel,
full fluted cylinder, cased with accessories,
used, by COLT brand - Second Generation

Part Number:	AAW-588
Availability:

Known as the COLT Model 1860 Army revolver, this revolver is beautifully finished, with a blued round barrel, fancy full fluted cylinder, color case hardened frame and loading lever, blued steel back-strap and triggerguard, and reddish brown walnut grips. This revolver has both the fancy full fluted cylinder, for lightest weight, and the four screw frame, which will accept the Cavalry shoulder stock accessory, sold elsewhere. The revolver is used with a bright well maintained bore. The cylinder has a drag line from being cocked. The wedge shows marks from being removed, along with marks in the finish around the wedge on the barrel assembly. The right side of the barrel has blemishes in the finish from long storage in the case, and there are some light scratches near the muzzle. This revolver comes in a red velvet lined wooden display case with a reproduction brass bullet mold, cap tin, and a Second Generation Colt's Patent powder flask with angled spout.

Should you decide to fire this revolver. Each chamber will hold 30 grains of FFFg powder. We recommend .454" balls, and 20 grains of GOEX FFFg powder, for best accuracy and best compression. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems. Prized by collectors, this pistol was made to be a precision shooter.

The .44 caliber, 8" barrel is fitted with blade front sight. The rear sight is a notch in the hammer. The barrel is marked ~ ADDRESS SAML COLT NEW-YORK CITY ~ on the top. The revolver has a blued steel backstrap. The brass triggerguard has aged to a mellow patina from long storage. The loading lever is attractively color case hardened. The front edge of the color case hardened frame is stamped Colt's Patent U.S. below the front of the cylinder. The brass triggerguard is marked .44 cal.

The wooden display case measures 15-3/4" long, by 7-5/8" wide, and 2-1/2" tall. The case has many small dings and marks. The red velvet lining shows wear from long storage. A small brass key is included. The cap tin and brass bullet mold are reproductions. The Second Generation Colt's Patent powder flask has some light scratches in the finish.

This used Second Generation revolver will be a joy to shoot at the range, and display in your gun room. It comes with a wooden display case and accessories. Order this nice percussion revolver for inspection, you will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Bullets .450" diameter, 200 grain, conical revolver bullet for .44 Army Revolvers, cast from LEE 90382, pure lead, per 50

Part Number:	BALL-450-200
Availability:
Price:	$17.99
Order Quantity:

.451" round balls, pure lead, Hornady, per 100

Part Number:	BALL-451
Availability:
Price:	$17.59
Order Quantity:

.454" round balls, pure lead, Hornady, per 100

Part Number:	BALL-454
Availability:
Price:	$17.99
Order Quantity:

Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey

Part Number:	BC-CTL
Availability:
Price:	$9.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore brush, bronze, for .45 caliber, 10-32 thread

Part Number:	BRUSH-45-10
Availability:
Price:	$4.29
Order Quantity:

Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads

Part Number:	FLASK-COLT
Availability:
Price:	$53.59
Order Quantity:

Military Holster, right hand, black leather, plain flap

Part Number:	HOLSTER-MB-R
Availability:
Price:	$32.99

Button jagged cleaning tip, .44 caliber, brass, 10-32 thread

Part Number:	JB-44-10
Availability:
Price:	$3.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Nipple Wrench for Revolvers, for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess

Part Number:	NW-130
Availability:
Price:	$9.99
Order Quantity:

Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.

Part Number:	OX-REV-44-SEAL
Availability:
Price:	$9.99
Order Quantity:

.44/.45 caliber revolver Wonder Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-44-W
Availability:
Price:	$7.99
Order Quantity:

Top of Page Home > Guns > Percussion guns > Percussion pistols & revolvers