North West Trade Gun sideplates: Serpent sideplates

Sideplate , for Thompson Center Renegade Rifle and other models with a steel sideplate, steel Sideplate for a Thompson Center Renegade Rifle and other models that use a steel sideplate. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-I . . . $5.99

Sideplate , for C.V.A. Mountain Rifle and other models with a steel sideplate, steel Sideplate for a Connecticut Valley Arms Mountain Rifle and other models that use a steel sideplate. Fits into a counter bore in the stock. 0.58" (15mm) outside diameter, Counter-bored to accept the factory lock bolt head.       SP-CVA-MTN-I . . . $5.99

Sideplates & lock bolt inlays

American longrifle sideplates: Allentown-Bethlehem, Lancaster

American Percussion Longrifle sideplates; Vincent, Ohio, New York & later:

English Sporting Rifle & Shotgun sideplates:

Fowling Gun & Shotgun sideplates:

French Musket & Fusil sideplates:

Jaeger, Hessian & early Germanic American Rifle sideplates:

Left Hand Gun sideplates:

Military Muskets, Rifles & Carbines sideplates:

Pistol sideplates:

Plains Rifle sideplates; Hawken, Dimick, Gemmer & Saint Louis rifles

Southern Mountain & Tennessee Longrifle sideplates:

Trade Rifle sideplates: H.E. Leman, J. Henry, Derringer & others

Sideplate for a U. S. Model 1803 Harper's Ferry Rifle , brass This brass sideplate is copied directly from the sideplate used on original 1803 and 1814 rifles. The sideplate includes a subtle error. The position of the front hole is not perfectly located, requiring installation of the front screw at a slight angle. Clearing the ramrod hole is essential, and the screw must be located slightly high. You may tou       SP-1803-B . . . $6.99

Sideplate, Lehigh County Dubbs Rifle , right hand, wax cast brass This Lehigh County longrifle sideplate is copied from an original. The sideplate will accept lock bolts up to 2-3/4" on center, or the front can easily be shortened to accommodate shorter length rifle or pistol locks. The rear lock bolt should be filed to match the top of the sideplate, per the original. The sideplate has a cast-in floral design. O       SP-DUBBS-B . . . $24.59

Sideplate, Lehigh County Dubbs Rifle , right hand, wax cast steel This Lehigh County longrifle sideplate is copied from an original. The sideplate will accept lock bolts up to 2-3/4" on center, or the front can easily be shortened to accommodate shorter length rifle or pistol locks. The rear lock bolt should be filed to match the top of the sideplate, per the original. The sideplate has a cast-in floral design. A       SP-DUBBS-I . . . $13.99

Sideplate for a French TULLE Fusil Fin , iron French sideplate, convex, for a Tulle fine fusil (fusil-fin), or fancy fusil-de-chasse. This sideplate may be inlet slightly, but is most often surface mounted. Ideal for use with our 3/8" deluxe dome head bolts, with 8-32 or 10-32 thread. Wax cast brass. Lock bolt holes are spaced 3" on center, to fit a fusil or fowler size flint lock. Our #SP-Tul       SP-TULLE-1-I . . . $14.29

Sideplate for a Fowling Gun, Early Rifle, or Fusil , wax cast brass This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast brass. Overall length 5-5/8". Made in the USA. Shown in exact full siz       SP-FOWL-5-B . . . $22.50

Sideplate for a Fowling Gun, Early Rifle, or Fusil , iron (wax cast steel) This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast steel. Overall length 5-5/8". Made in the USA. Shown in exact full siz       SP-FOWL-5-I . . . $17.99

Sideplate for a French Fusil , wax cast brass Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast in brass. Overall length 5-1/2". Made in the USA. This simple early sideplate has an attractive p       SP-FUSIL-A-B . . . $22.50

has been added to your .

---