English Sporting Rifle , .45 caliber fast twist, 31" barrel, R. E. Davis bar lock, walnut, iron trim, used This rifle is inspired by mid 19th century era halfstock English Sporting rifles. The rifle is stocked in walnut and trimmed in fire blued iron furniture. The rifle is fitted with a .45 caliber fast twist barrel for shooting a conical bullet. The bore is bright and has been well maintained. The checkered walnut stock is shaped with a pistol grip. T       AAU-771 . . . $2,979.00

Antique English Pistol , .58 caliber smoothbore, 9" swamped barrel, figured walnut, engraved iron trim, flintlock, repaired stock, signed Knubley This antique English pistol is stocked in walnut and trimmed in engraved steel furniture. The forearm of the pistol has been replaced from the forward ramrod pipe to the muzzle. A nickel silver ramrod pipe was fitted. The pistol is assembled with a swamped octagon .58 caliber smoothbore barrel, mated to a very fine English flintlock with sliding sa       AAV-315 . . . $2,599.00

Antique French Pistol , .55 caliber smoothbore, 8-3/8" octagon-to-round barrel, reconverted flintlock, iron trim, walnut, unsigned This unsigned holster pistol appears to French in style. The pistol is stocked in European walnut and trimmed in steel furniture with bone sideplates. The iron furniture has aged to a dark brown patina. The round faced flintlock has been reconverted to flintlock with a modern cock assembly, pan, and frizzen. The octagon-to-round barrel has a silver       AAV-347 . . . $2,459.00

Kentucky Pistol , .54 caliber, 8-1/2" octagon-to-round barrel, flintlock, walnut, brass, used This flint lock pistol features a .54 caliber octagon-to-round barrel with a bright well maintained bore. Stock in walnut and trimmed in brass furniture, this pistol points naturally. Perfect for your next Colonial reenactment, this handy pistol weighs 2.5 pounds. The .54 caliber 8-1/2" octagon-to-round barrel transitions at the midpoint with a si       AAV-577 . . . $2,599.00

Enfield Musketoon , .58 caliber, 24" barrel, percussion, walnut, brass, used by Davide Pedersoli & Co. This Enfield Musketoon, with 24" barrel, is dated 1861 on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 600 yards. Enfield musket       AAV-656 . . .

Hawken Rifle , .58 caliber 36" Moody Metal Works barrel, percussion, iron trim, walnut, new, unfired, by George Nelson Stocked in walnut, this classic percussion halfstock Hawken rifle is trimmed with traditional Hawken iron furniture. The 36" barrel and iron trim are finished to a dark brown. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel. allowing instant take-down, for easy cleaning. This rifle was assembled by contemporary       AAV-702 . . . $3,099.00

Pennsylvania Longrifle , .50 caliber, 42" Rice swamped barrel, Chamber's Golden Age flintlock, maple, brass trim, used Stocked in dark stained maple, this flint longrifle is trimmed in patina finished brass furniture with hand engraved accents. The .50 caliber Rice 42" swamped octagon barrel is mated to a Jim Chambers Golden Age flintlock. The bore is bright and ready to shoot. Offered in used condition, the stock and barrel finish have a few minor handling marks.       AAV-719 . . .

Rifle Barrel Assembly for T/C Seneca, .45 caliber, 13/16" octagon, 27" length, 1-48" twist, used in good condition, by Thompson Center This factory Thompson Center Seneca barrel assembly is used in good condition with some marks and speckles on the blue finish from handling. The .45 caliber bore is bright and has been well maintained. The bore is rifled with a 1 in 48" twist for a round ball or .45 caliber Maxi ball. The barrel is fitted with the factory elevation and windage adju       AAV-791 . . . $299.00 Closeout

Lyman Great Plains Pistol , .54 caliber, 8" barrel, percussion, walnut, used This nice used pistol is in excellent condition, with only a few handling marks. Stocked in walnut, with 15/16" octagon barrel, color hardened percussion lock, and brass triggerguard, this Plains Pistol has the classic 1830 era bag butt architecture. This is a very comfortable grip, large enough for man sized hands, with enough drop and curve to       AAV-801 . . . $329.00

Cartridge Case , .297 - .230 Morris Long for Rook & Rabbit Rifle, unprimed brass, no headstamp, use small rifle primer, each Cartridge case for .297 - .230 Morris Long, for Rook & Rabbit rifle, new unprimed brass, unmarked, use small rifle primer. Often confused with the similar .297 - .230 Morris Short, or the .297 - .230 Morris Sporting, you can easily trim this case, and full length size it, to fit either of these other variations. Sub-caliber adaptors were popular ac       CASE-297-230-MORRIS-LONG . . . $1.49

English Fowler flint 1" octagon hooked breech plug , 3/4-16 thread This English style tang is wax cast of malleable 8620 steel. It may be straightened, or bent cold. Made in 3/4-16 with a .550" thread journal. The overall length of the tang is just over 1-13/16". The groove at the top of the tang resembles those found on British Officer's fusils, and some pre-Revolutionary War era fowling guns. Build your own fli       PLUG-EF-16-3 . . . $43.99

Machine screw, for underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a rib, or rear sight. This is a popular gunsmithing screw thread size, often used on modern telescope mounts, T/C rifle ribs. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-R . . . $1.99

Suede Sight and muzzle Sacks , black with cord lock and decorative beads Made of black suede with a lace drawstring, these pouches are used to cover rifle rear tang sights and front sights. Either removed the sight and place it in the bag or place over the sight while attached to the rifle. Includes two sacks.       SIGHT-SACK-BL . . . $19.59

Suede Sight and muzzle Sacks , tan with cord lock and decorative beads Made of tan suede with a lace drawstring, these pouches are used to cover rifle rear tang sights and front sights. Either removed the sight and place it in the bag or place over the sight while attached to the rifle. Includes two sacks.       SIGHT-SACK-TA . . . $19.59

Ghost Ring Tang Sight with two aperture posts, and mounting hardware, by Davide Pedersoli & Co., Italy A ghost ring tang sight by Davide Pedersoli & Co. is designed to fit many Pedersoli rifles; some Hawken models Kodiak Express, Howdah pistol, and double barrel shotgun. Using on the Howdah pistol or double barrel shotgun will require elevating the front sight. The sight includes two posts with 0.157" diameter aperture. The sight has both windage an       RS-DP-GRS . . . $92.00

John Vincent & Son, pre shaped stock, pre-inlet, 13/16", or 7/8" octagon barrel, Goulcher lock Shaped and pre-inlet for a 13/16", or 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ram

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M1 . . . $210.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M3 . . . $270.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, extra fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M4 . . . $350.00

Stock, John Vincent & Son, pre-inlet, 7/8" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M1 . . . $210.00

Stock, John Vincent & Son, pre-inlet 7/8" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M3 . . . $270.00

Stock, John Vincent & Son, pre-inlet, 7/8" octagon barrel, Goulcher lock, extra fancy maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M4 . . . $350.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M1 . . . $279.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, fancy maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M3 . . . $320.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain walnut Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-W1 . . . $390.00

has been added to your .

---