Gunsmithing Labor : install soldered part, sight or lug, per operation Round barrels sometimes require soldered lugs or sights. Thin walled barrels often require soldered lugs or sights. Prompt service : Our gunsmith will install our underlug using solder, for standard (halfstock size) wedge key, small (fullstock size) wedge key, or for a round steel dowel pin. Shop time typically requires 7 to 10 days for labor. Un       LABOR-US . . . $25.00

Stock, Invest Arms , pre shaped, pre-inlet, 15/16" barrel, Invest Arms lock, plain maple Convert your Invest Arms Hawken or Lyman Great Plains Rifle or kit to a fullstock, using all your existing parts and this new fullstock. Pre-inlet for a 15/16" up to 36" barrel, tang, lock, and double set triggers. This extra long stock may be cut to fit your buttplate, or select one of our steel buttplates, toeplate, and 3/8" rod pipes, to trim yo       STK-IAF-15-M1 . . . $240.00

Stock, Invest Arms , pre shaped, pre-inlet, 15/16" barrel, Invest Arms lock, fancy maple Convert your Invest Arms Hawken or Lyman Great Plains Rifle or kit to a fullstock, using all your existing parts and this new fullstock. Pre-inlet for a 15/16" up to 36" barrel, tang, lock, and double set triggers. This extra long stock may be cut to fit your buttplate, or select one of our steel buttplates, toeplate, and 3/8" rod pipes, to trim yo       STK-IAF-15-M3 . . . $329.00

Stock, Thompson Center , fullstock pre shaped, pre-inlet, 1" barrel, Thompson Center lock, plain maple Convert your Thompson Center Hawken or Renegade rifle or kit to a fullstock, using all your existing parts and this new fullstock. Be sure to order an additional wedge key and underlug, if using wedge keys to retain the barrel. We recommend using two of our thinner #Key-58-I and two #UL-104-A lug staples for this fullstock conversion. Pre-inlet for       STK-TCF-16-M3 . . . $329.00

Antique Halfstock Rifle , .35 caliber, 37-1/2" barrel, walnut, nickel silver, percussion, LITTLE stamped marking on barrel This antique halfstock rifle is stocked in walnut and trimmed in nickel silver furniture. The barrel is stamped with a partial stamped mark on the breech with the number 8 and a very faint stamp that appears to be LITTLE , . The square tail percussion lock is marked Whitmore & Wolff, Pittsburgh , which dates the rifle to the mid-to-late 1850's. Tr       AAU-437 . . . $2,549.00

Antique Ketland Fowling Gun , .60 caliber smoothbore, 40-1/4" octagon-to-round barrel, walnut, brass, reconversion to flintlock This antique English fowler appears to have been built circa 1820 by the Ketland & Co. family of gunmakers, which imported large numbers of fowlers into the United States. The walnut stock has a checkered wrist and scattered handling marks from decades of use. The brass trim features light engraving with a pineapple finial triggerguard. The flintlo       AAU-742 . . . $2,429.00

Antique English Pistol , .58 caliber smoothbore, 9" swamped barrel, figured walnut, engraved iron trim, flintlock, repaired stock, signed Knubley This antique English pistol is stocked in walnut and trimmed in engraved steel furniture. The forearm of the pistol has been replaced from the forward ramrod pipe to the muzzle. A nickel silver ramrod pipe was fitted. The pistol is assembled with a swamped octagon .58 caliber smoothbore barrel, mated to a very fine English flintlock with sliding sa       AAV-315 . . . $2,599.00

Hawken Rifle , .54 caliber, 36" Douglas XX barrel, walnut, iron, percussion, fine quality, used, signed by Robert S. Hannahs If you are a muzzle loading expert, you recognize this handsomely finished Hawken rifle as the work of the famous custom gun maker, Robert Hannahs, The House of Hawken, Kenosha, Wisconsin . Made in 1972, it is used with only a few scattered handling marks on the stock. Made for a 6'0" or taller shooter, this rifle has a full 14-3/8" trigger reach.       AAV-665 . . .

Ohio Longrifle , .50 caliber, 40-1/2" barrel, percussion, maple, brass trim, hooked breech, unfired, signed Sam Gorham This Ohio percussion fullstock rifle is fitted with a .50 caliber 42" straight octagon barrel with hooked breech. Stocked in maple, the rifle is trimmed in brass furniture. The R.E. Davis Hawken lock is mated to single lever double set triggers, that fire from the set position only. The .50 caliber barrel is finished to a dark matte brown. The barr       AAV-689 . . . $2,299.00

Model 1862 Pocket Navy Revolver , .36 caliber, 5-1/2" octagonal barrel, silver plated brass triggerguard and backstrap, used, with some marks, by Colt - Second Generation This replica 1862 Colt Pocket Navy Model revolver is .36 caliber, with a five shot cylinder, and 5-1/2" octagon barrel. The cylinder and barrel are finished to a dark blue. The frame, hammer, and loading lever are color case hardened. The triggerguard and backstrap are silver plated. The walnut grips are stained to a reddish brown. This revolver ha       AAV-705 . . .

Thompson Center Hawken , .50 caliber, 28" barrel with QLA muzzle, percussion, walnut stock, brass trim, used, by Thompson Center Arms This used .50 caliber Thompson Center Hawken percussion rifle is ready to shoot. This factory assembled rifle is stocked in American black walnut, with brass furniture, and 28" barrel with QLA muzzle. The bore is bright and has been well maintained. The stock has a few scattered handling marks, and the brass has been blackened to reduce glare when       AAV-712 . . . $550.00

Antique Austrian Model 1854 Lorenz Jaegerstutzen , .54 caliber, 28" octatgon-to-round barrel, chipped and replaced wood, missing original rear sight, percussion, iron furniture, well aged patina During the American Civil War the Europeans states sold thousands of arms to both sides. The Austrian Model 1854 musket was imported by both the Union and Confederacy for use in the American Civil War in large numbers. Smaller numbers, some estimates of 6000 to Union and unknown Confederacy, of what is sometimes called a Lorenz short rifle, or Jaeg       AAV-753 . . .

Mohawk Belt Axe , 2-1/4" blade, with handle, wax cast 4140 steel alloy, made in the U. S. A. The belt axe head is wax cast of strong 4140 alloy steel. It measures 4-7/8" long with a 2-1/4" cutting surface. The edge has been differential hardened, tempered, and sharpened. Edge hardness is Rc 40 - 45 to allow resharpening with fine cut file. The steel head has not been buffed or polished. The carved hickory handle is 14" long, with a curved       AXE-MOHAWK . . . $45.00

British Single Shot Rifles, Volume 4 by Walter G. Winfer Westley Richards was the leader in British breech-loading single shot development. Their early designs predated both the paper cartridge and coil case forms of the 1850-1860 period. Volume 4 describes in great detail Westley Richard's designs during the early breech-loading period. Much attention is given to the text and hundreds of photos and draw       BOOK-BSSR-V4 . . . $69.99

Build Track's Hawken fullstock plains rifle , flintlock, with 1" straight octagon barrel up to 42" in length Price: starting at $1,154.49 Build Track's Early Hawken fullstock rifle kit, 1" octagon barrel, up to 42" barrel, traditional iron trim, with maple stock Track's best early fullstock Hawken Rifle parts were selected by the by noted gunmaker J.E. Brown , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimm

Belt axe handle, 15" ash, for belt axe or spiked axe This 15" belt axe handle handle fits our Colonial European belt axe, or spiked trade axe. The tapered eye must is slotted to accept a wedge, included, installed to secure the head. The eye is 1-3/16" tall by 15/32" wide. Order several! Same day shipment, when you click ADD TO CART and complete shopping cart check out. Inspect the item, return it fo       HANDLE-CE . . . $7.99

Belt Axe Handle , 14" hickory, for Mohawk Belt Axe Made for Track's "Mohawk Belt Axe", this axe handle is made from hickory, it is unstained and sanded smooth. The handle measures 14" long with rounded grip. The handle will need to be notched and have a wedge fitted to secure the head. Made to fit the Mohawk Axe head, this handle has a "keyhole shaped" tapered top cross section, about .560" wide at       HANDLE-MOHAWK . . . $12.00

Inlay , Tiny Slotted Oval, 0.75" by 0.38", brass 0.040" thick, slot 0.072" b 0.375" This tiny oval has a slot about .072 x .375" for a wedge key.       IN-SLOT-1-B . . . $1.20

Inlay , Tiny Slotted Oval, 0.75" by 0.38", steel 0.040" thick, slot 0.072" b 0.375" This tiny oval has a slot about .072 x .375" for a wedge key.       IN-SLOT-1-I . . . $1.20

Inlay , Tiny Slotted Oval, 0.75" by 0.38", nickel silver 0.040" thick, slot 0.072" by 0.375" This tiny oval has a slot about .072 x .375" for a wedge key.       IN-SLOT-1-S . . . $1.60

Inlay , Slotted Oval, 1.11" by 0.55", brass 0.062" thick slot is 0.103" by 0.365" Slotted oval inlay, for rifles with wedge key. Inlays exactly fits our #Key-36. Little or no filing is required. Cut from heavy stock, slotted, drilled, countersunk for our #3 x 1/4" screws, sold separately. The oval is 1.11" wide by 0.55" tall. The slot is .103 x .365" exactly.       IN-SLOT-2-B . . . $3.99

Inlay , Slotted Oval, 1.11" by 0.55", steel 0.062" thick slot is 0.103" by 0.365" Slotted oval inlay, for rifles with wedge key. Inlays exactly fits our #Key-36. Little or no filing is required. Cut from heavy stock, slotted, drilled, countersunk for our #3 x 1/4" screws, sold separately. The oval is 1.11" wide by 0.55" tall. The slot is .103 x .365" exactly.       IN-SLOT-2-I . . . $2.99

Inlay , Slotted Oval, 1.11" by 0.55", brass 0.050" thick slot is 0.120" by 0.375" Slotted oval inlay, for rifles with wedge key. Oval is 1-3/32" long by 9/16" wide. Cut from heavy stock and slotted for key. The slot is .120 x .375" exactly.       IN-SLOT-3-B . . . $1.20

Inlay , Slotted Oval, 1.11" by 0.55", brass 0.050" thick slot is 0.120" by 0.375" Slotted oval inlay, for rifles with wedge key. Oval is 1-3/32" long by 9/16" wide. Cut from heavy stock and slotted for key. The slot is .120 x .375" exactly.       IN-SLOT-3-I . . . $1.20

Inlay , Slotted Oval, 1.11" by 0.55", brass 0.050" thick slot is 0.120" by 0.375" Slotted oval inlay, for rifles with wedge key. Oval is 1-3/32" long by 9/16" wide. Cut from heavy stock and slotted for key. The slot is .120 x .375" exactly.       IN-SLOT-3-S . . . $1.60

has been added to your .

---