Items Per Page:
|< First < Previous Viewing page 2 of 2 Next > Last >|
1  | 2
 Making Muzzleloading Accessories by R. H. McCrory Making Muzzleloading Accessories by R. H. McCrory
This book covers the field of accessories and small useful tools for the shooter. How to make a powder horn, capper, nipple wrench, loading block, and many more useful items that are handy for the shooter. It gives detailed drawings and dimensions on how to make each accessory. Soft cover, 5 x 8" format of 46 pages. The Table of Contents includes
    In Stock   BOOK-MMA . . . $6.99

 Flash Guard Screw & Nut for Investarms: Bridger, Gemmer, Hawken flintlocks, Lyman Great Plains Rifle. 3.5-.6mm thread, inside mounting screw with square nut. Flash Guard Screw & Nut for Investarms: Bridger, Gemmer, Hawken flintlocks, Lyman Great Plains Rifle. 3.5-.6mm thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a Investarms produced Lyman Great Plains Rifle flintlock requires a longer frizzen screw with a nut to mount a flash guard. This same lock and screw is used on the Lyman Trade Rifle and Deerstalker, Investarms: Hawken, Bridger Hawken, Gemmer Hawken, and older Cabela's Hawken. Installation of a iron or brass flash
    In Stock   LOCK-GPR-F-FGX . . . $6.99

 Flash Guard Screw & Nut for J. Kibler's Colonial flintlocks, 8-32 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for J. Kibler's Colonial flintlocks, 8-32 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a J. Kibler's Colonial flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire v
    In Stock   LOCK-JKC-FGX . . . $6.99

 Flash Guard Screw & Nut for J. Kibler's Ketland flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for J. Kibler's Ketland flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a J. Kibler's Ketland flintlock, used on the Southern Mountain rifle, requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, wher
    In Stock   LOCK-JKK-FGX . . . $6.99

 Flash Guard Screw & Nut for large Siler, deluxe Siler, & Golden Age flintlocks, 8-32 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for large Siler, deluxe Siler, & Golden Age flintlocks, 8-32 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a large Siler, deluxe Siler, Jim Chamber''s Golden Age, and Gunmaker's flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enact
    In Stock   LOCK-SL-FK-FGX . . . $6.99

 Flash Guard Screw & Nut for small Siler flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for small Siler flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a small Siler flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys sh
    In Stock   LOCK-SS-FK-FGX . . . $6.99

 Flash Guard Screw & Nut for Thompson Center flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for Thompson Center flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a Thompson Center flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volley
    In Stock   LOCK-TC-FGX . . . $6.99

 Nipple , 12-28 thread, for Ruger Old Army revolver, #11 CCI cap, stainless steel, for Ruger hex socket or Track's #NW-130 wrench Cone length: 0.270" Thread journal length: 0.260" Overall length: 0.530" Diameter of base: 0.285" Nipple , 12-28 thread, for Ruger Old Army revolver, #11 CCI cap, stainless steel, for Ruger hex socket or Track's #NW-130 wrench Cone length: 0.270" Thread journal length: 0.260" Overall length: 0.530" Diameter of base: 0.285"
    In Stock   PRA-S . . . $4.99

 Cleaning Rod for .44 Army Revolver , 3/8" hickory, 12" long, brass tips, 10-32 thread, turned hardwood knob handle with 8-32 thread. Cleaning Rod for .44 Army Revolver , 3/8" hickory, 12" long, brass tips, 10-32 thread, turned hardwood knob handle with 8-32 thread.
Cleaning Rod for .44 Colt Army, Walker, Dragoon, Remington, .45 Ruger Old Army , Sanded and ready to stain, this 3/8" hickory rod is 12" long, with a brass tip threaded 10-32 for your cleaning accessories. Carry it to the range, camp, or display it in a cased set. The turned wooden knob handle is threaded 8-32 and may be removed to accept 8-32 acc
    Out of Stock, request notification when available.   RAMROD-44-COLT-12-H . . . $9.99

 Enfield Musketoon , .58 caliber, 24" barrel, percussion, walnut, brass, used by Davide Pedersoli & Co. Enfield Musketoon , .58 caliber, 24" barrel, percussion, walnut, brass, used by Davide Pedersoli & Co.
This Enfield Musketoon, with 24" barrel, is dated 1861 on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 600 yards. Enfield musket
    Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.   AAV-656 . . .

 L&R's RPL-05-C Percussion Lock to upgrade Lyman Great Plains, Cabela's, or InvestArm Hawken Rifles , right hand only, made in the USA, by L&R Lock Company L&R's RPL-05-C Percussion Lock to upgrade Lyman Great Plains, Cabela's, or InvestArm Hawken Rifles , right hand only, made in the USA, by L&R Lock Company
This percussion lock will upgrade and replace the lock on the Lyman Great Plains Rifle, InvestArm Hawken, or Cabela's Hawken. Overall length is 5-1/16" x 1" width. Right hand only. This lock has thicker stronger internal springs and parts than the Lyman Great Plains Rifle, InvestArm Hawken, or Cabela's Hawken lock. It requires deepening the lock mo
    In Stock   LOCK-LR-05-C . . . $199.00

 Nipple , 12-24 thread, used in some FIE marked 1849 Colt pocket model revolvers #11 CCI cap, hardened steel Cone length: 0.240" Thread journal length: 0.225" Overall length: 0.465" Diameter of base: 0.275" (this small diameter requires grinding the wrench outside diameter to fit) Nipple , 12-24 thread, used in some FIE marked 1849 Colt pocket model revolvers #11 CCI cap, hardened steel Cone length: 0.240" Thread journal length: 0.225" Overall length: 0.465" Diameter of base: 0.275" (this small diameter requires grinding the wrench outside diameter to fit)
    In Stock   PFIE-I . . . $6.99

 Drum drilling tool , alignment jig, for drilling nipple threads Drum drilling tool , alignment jig, for drilling nipple threads
Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy. No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple
    In Stock   TOOL-DRUM . . . $15.99

 Oversize threaded nipple, .255-28, 1/4-28 with .005" oversize thread, for CCI#11 cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Oversize threaded nipple, .255-28, 1/4-28 with .005" oversize thread, for CCI#11 cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
#ROS-05-S nipple has 1/4-28 +.005" threads. .636" overall length, .200" thread journal length, .235" cone height, .208" wrench flats .309" body diameter
    In Stock   ROS-05-S . . . $6.99

 Gibbs Match Rifle , .451 caliber fast twist, 35" octagon-to-round barrel, percussion, checkered walnut, pistol grip, Red River Soule tang sight, Lyman spirit level globe sight, original sights, molds, sizing dies, used, by Davide Pedersoli & Co. Gibbs Match Rifle , .451 caliber fast twist, 35" octagon-to-round barrel, percussion, checkered walnut, pistol grip, Red River Soule tang sight, Lyman spirit level globe sight, original sights, molds, sizing dies, used, by Davide Pedersoli & Co.
This long range target rifle is modeled after the work of the English gunsmith George Gibbs circa 1865. This handsome halfstock rifle has a walnut stock with checkered pistol grip wrist and forearm . The grip cap and forend cap are ebony. Furniture is a mixture of blued and color case hardened steel. Originally fitted with Pedersoli mid-range tang
    Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.   AAV-597 . . .
|< First < Previous Viewing page 2 of 2 Next > Last >|
1  | 2
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards