Nipples

Items Per Page:
|< First < Previous Viewing page 1 of 3 Next > Last >|
1  | 2  | 3
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original:

    Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after each day's use, as original. Coat the nipple threads with Birchwood Casey's Choke Tube Lubricant to allow easy removal, even after a long day of competition shooting.
    Discard the factory made blued steel nipples supplied on imported replica guns, especially revolvers. Made to fit some unknown European cap, they have too much taper to prevent cap fragments from falling into the hammer notch, jamming your revolver. Our nipples fit CCI & RWS No. 11 standard caps correctly.

Track's 416 stainless steel nipples:

    Made from 416 alloy (12% Chromium), the first free machining stainless alloy with Martensitic qualities (hardenable, tempers normally, and is magnetic unlike most stainless alloys). Stronger, tougher, more resistant to battering, 416 alloy is longer lasting than the famous old Ampco bronze nipples, now obsolete.
    Truly precision turned, our nipples have tapered cones made to perfectly fit the CCI brand No. 11 standard cap, or the identical Dynamit - Nobel RWS brand No. 1075 (red label) cap. Remington No. 11 caps are a tiny bit larger, an easy fit. Track has improved the fit, and extended the life of our percussion nipples.

    The values shown for the overall length, thread journal length, and diameter of the base are ideal values and may vary slightly due to machining tolerances. We have noted a wide variety of nipple threads and lengths used on imported rifles and percussion revolvers, even on the same model from the same maker. We recommend confirming the thread, overall length, thread journal length, base diameter, and comparing the cone length. Cone length = overall length minus thread journal length. The cone length must be similar in length to the original nipple to assure good function especially in percussion revolvers.

Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, musket cap, stainless steel, requires a well centered hammer cup!

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, musket cap, stainless steel, requires a well centered hammer cup!
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: CVA-MS
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 7-1mm metric thread to repair CVA, Traditions, Jukar and other Spanish made guns, nipple seat must be re-tapped to 7mm to accept this nipple,  Use No. 11 CCI cap, or No. 1075 RWS cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, 7-1mm metric thread to repair CVA, Traditions, Jukar and other Spanish made guns, nipple seat must be re-tapped to 7mm to accept this nipple, Use No. 11 CCI cap, or No. 1075 RWS cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: CVA-OS-S
Availability: In Stock
Price: $6.99
Order Quantity:
Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: CVA-S
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451"  AH Volunteer rifle, Armisport 1853 Enfield musket, musket cap, hardened steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451" AH Volunteer rifle, Armisport 1853 Enfield musket, musket cap, hardened steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMI-I
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451"  AH Volunteer rifle, Armisport 1853 Enfield musket, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451" AH Volunteer rifle, Armisport 1853 Enfield musket, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMI-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-I
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-SQ-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451" AH Volunteer rifle, Armisport 1853 Enfield musket, No. 11 CCI cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 8-1.25mm metric thread, for Euroarms Italian replica Enfield muskets, Euroarms .451" AH Volunteer rifle, Armisport 1853 Enfield musket, No. 11 CCI cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: ERI-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: ERS-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, Hot Shot® for CVA, Traditions, or other Spanish mfg. rifles, 6-1mm metric thread, for #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, Hot Shot® for CVA, Traditions, or other Spanish mfg. rifles, 6-1mm metric thread, for #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-CVA
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, Hot Shot® for Lyman & InvestArms, 6-.75mm thread, for #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, Hot Shot® for Lyman & InvestArms, 6-.75mm thread, for #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-RLP
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, Hot Shot® forThompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195"  Overall length: 0.635" Diameter of base: 0.307" Nipple, Hot Shot® forThompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-RST
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 8-1mm metric thread, for COLT 1861 signature series special contract  musket, Armisport  1842 &1861 Springfield, Armisport  1859 &1863 Sharps Carbine, Davide Pedersoli 1859 Sharps Infantry Rifle, Euroarms Alexander Henry .451 Volunteer Rifle, Euroarms U.S. Model 1841 "Mississippi" Rifle, Euroarms U.S. Model 1863 Remington Contract "Zouave" Rifle,   musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 8-1mm metric thread, for COLT 1861 signature series special contract musket, Armisport 1842 &1861 Springfield, Armisport 1859 &1863 Sharps Carbine, Davide Pedersoli 1859 Sharps Infantry Rifle, Euroarms Alexander Henry .451 Volunteer Rifle, Euroarms U.S. Model 1841 "Mississippi" Rifle, Euroarms U.S. Model 1863 Remington Contract "Zouave" Rifle, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MMI-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-24 thread, for Springfield musket, musket cap, hardened steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-24 thread, for Springfield musket, musket cap, hardened steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MMS-I
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-24 thread, for Springfield musket, musket cap, stainless steel

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-24 thread, for Springfield musket, musket cap, stainless steel
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MMS-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-24 thread, for Springfield musket, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-24 thread, for Springfield musket, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MMS-SQ-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 5/16-24 (.315") thread, for antique muskets, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-24 (.315") thread, for antique muskets, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MOS-S
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 8-1mm metric thread, for COLT 1861 signature series special contract  musket, Armisport 1842 &1861 Springfield, Armisport 1863 Sharps Carbine, for No. 11 CCI cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 8-1mm metric thread, for COLT 1861 signature series special contract musket, Armisport 1842 &1861 Springfield, Armisport 1863 Sharps Carbine, for No. 11 CCI cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MRI-S
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 5/16-24 thread, for Springfield musket, #11 CCI cap, stainless steel

Cone length: 0.475" Thread journal length: 0.275"  Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-24 thread, for Springfield musket, #11 CCI cap, stainless steel
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: MRS-S
Availability: In Stock
Price: $3.99
Order Quantity:
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remingtion revolvers, #11 CCI cap, hardened steel

Cone length: 0.300" Thread journal length: 0.200"  Overall length: 0.500" Diameter of base: 0.307" Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remingtion revolvers, #11 CCI cap, hardened steel
  • Cone length: 0.300"
  • Thread journal length: 0.200"
  • Overall length: 0.500"
  • Diameter of base: 0.307"
Part Number: PCC-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remingtion revolvers, #11 CCI cap, stainless steel

Cone length: 0.300" Thread journal length: 0.200"  Overall length: 0.500" Diameter of base: 0.307" Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remingtion revolvers, #11 CCI cap, stainless steel
  • Cone length: 0.300"
  • Thread journal length: 0.200"
  • Overall length: 0.500"
  • Diameter of base: 0.307"
Part Number: PCC-S
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 6-.75mm metric thread, for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers,  #11 CCI cap, hardened steel

Cone length: 0.300" Thread journal length: 0.225"  Overall length: 0.525" Diameter of base: 0.307" Nipple, 6-.75mm metric thread, for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, hardened steel
  • Cone length: 0.300"
  • Thread journal length: 0.225"
  • Overall length: 0.525"
  • Diameter of base: 0.307"
Part Number: PIR-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 6-.75mm metric thread, .319" long cone for some FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel

Cone length: 0.319" Thread journal length: 0.225"  Overall length: 0.544" Diameter of base: 0.307" Nipple, 6-.75mm metric thread, .319" long cone for some FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel
  • Cone length: 0.319"
  • Thread journal length: 0.225"
  • Overall length: 0.544"
  • Diameter of base: 0.307"
Part Number: PIR-LS
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 6-.75mm metric thread, for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers,  #11 CCI cap, stainless steel

Cone length: 0.300" Thread journal length: 0.225"  Overall length: 0.525" Diameter of base: 0.307" Nipple, 6-.75mm metric thread, for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, stainless steel
  • Cone length: 0.300"
  • Thread journal length: 0.225"
  • Overall length: 0.525"
  • Diameter of base: 0.307"
Part Number: PIR-S
Availability: In Stock
Price: $4.99
Order Quantity:
|< First < Previous Viewing page 1 of 3 Next > Last >|
1  | 2  | 3
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2014Track of the Wolf, Inc.
Accepted Credit Cards