Used, this White Mountain Carbine is stocked in walnut with a few handling marks in the finish This handy carbine has a adjustable rear sight, factory fitted black rubber recoil pad, sling swivel mounts, and blued steel furniture. The 21" blued barrel is octagon-to-round and fitted with a blued steel bead front sight and adjustable rear sight. The 50 caliber bore is bright and well maintained. This carbine in the later production with the 1 in 38" twist rate. Trigger reach is 13-3/4". Weight is 6.4 lbs.
Stocked in American black walnut, this carbine has a some scattered marks in the finish from handling and use. The toe of the stock and single ramrod pipe are fitted with sling swivel studs for quick detach swivels, to provide easy carrying when in the field. The octagon-to-round barrel is fitted with a hooked breech to allow for easy cleaning. Put the lock at half cock, remove the ramrod, drift the wedge key loose, and the barrel can be removed for cleaning without worry of getting any residue. The barrel bluing has light wear from use. The breech is stamped with T/C factory markings and serial number.
The toe has a blued steel stud for attaching a sling swivel. The forward stud is attached to the single ramrod pipe. The blued steel trigger guard is 5" long with a large bow to accommodate a gloved hand. The single trigger has a blued steel trigger plate. The percussion lock is color case hardened, with factory engraving. It features a fly detent, for smooth lock action, and a powerful coil mainspring. The lock is retained by a single blued steel lock bolt with a blued steel washer-style side plate. The rifle includes a wooden ramrod with blued steel tips. The rear tip has 10-32 female threads for attaching your loading and cleaning jags.
Used, this T/C White Mountain Carbine has a bright well maintained bore. It is ready to shoot, and will serve you well at the range or in the woods on your next hunt. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
This American made rifle is a good value. We invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value.
|
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
|
|
|
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
|
|
|
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
|
|
|
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
|
|
|
Bore brush, bronze, for .50 caliber, 10-32 thread
|
|
|
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
|
|
|
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
|
|
|
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
|
|
|
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
|
|
|
Powder measure, brass, adjustable 0 to 120 grains, with spout
|
|
|
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
|
|
|
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
|
|
|
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
|
|
|
Ramrod for Thompson Center White Mountain Carbine & Pennsylvania Carbine,
3/8" brown Delrin nylon, 21-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front.
Made in the U.S.A. by Track of the Wolf, in Elk River, Minnesota. We turn the brass tips and assemble the ramrod.
|
|
|
Nipple, 1/4-28 thread, for standard rifle,
#11 CCI cap, square shank,
hardened steel, ideal for restoration
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
|
|
|
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
- Cone length 0.440"
- Overall length: 0.635"
- Thread journal length: 0.195"
- Diameter of base: 0.307"
|
|
|
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
|
|
|
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
|
|