Vent,
Touch Hole Liner
,
3/8-24 thread, stainless steel,
slotted for easy removal
Part Number: THL-S6S
Availability: In Stock
Price: $3.99
Order Quantity:
Flash Hole Liner, often called a vent, vent liner, or touch-hole liner.

Threaded 3/8-24, made in the USA, stainless steel, slotted for easy removal.

Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joint, sometimes called the "sunset" position. Covered by the frizzen when closed, the hole is a window centered on the heat of your priming flash, for instant ignition, without the whoosh-bang delay, seen in many flint guns.

Only the better quality London made guns were factory fitted with vent liners, but nearly all flint guns were later fitted with vent liners, after the vent hole in the barrel became worn from flash erosion, corrosion, or the aggressive use of a vent pick.

Dab a tiny amount of our #BC-CTL Birchwood Casey's Choke Tube Lube on the threads, to prevent this vent liner from becoming stuck, after each cleaning.
Adobe Reader required to view the files below.
Get Adobe Reader
page_391.pdf Last updated:4/25/2012 (137.76 KB)
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: Item is currently sold out.
Price: $6.99
Order Quantity:
  
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
counter sink,
82 degrees, 3/8" diameter
counter sink, 82 degrees, 3/8" diameter
Part Number: DRILL-CS-82-6
Availability: In Stock
Price: $10.99
Order Quantity:
drill bit, HSS, Letter Q, .3320" diameter, tap drill 3/8-24 & 3/8-32 thread
drill bit, HSS, Letter Q, .3320" diameter, tap drill 3/8-24 & 3/8-32 thread
Part Number: DRILL-Q
Availability: In Stock
Price: $6.29
Order Quantity:
Tap, high carbon steel, 3/8-24 thread, taper tap
Tap, high carbon steel, 3/8-24 thread, taper tap
Part Number: TAP-3/8-24-T
Availability: In Stock
Price: $5.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards