Classic Ketland an 1810-1820 era flintlock, by Jim Chambers
Part Number: LOCK-KL-FL-RH
Availability: Item is currently sold out.
Price: $194.99
Order Quantity:
  
Perhaps the most popular style of flint lock found on fine original antique American longrifles, this attractive medium size rifle lock is based on our best Siler internal lock parts. You can be assured of long life, and easy service, if ever needed.

Notice the pointed tail and rounded pan of the lock plate. The tail of the lock plate is slightly lower than the raised panel that forms the lock plate, separated by an attractive molding. The raised panel is surrounded by a chamfered edge.

The frizzen glides over a roller bearing on the frizzen spring, which is retained by a hidden mounting screw. The Ketland family of lock makers were quick to incorporate the best new features in their rifles, fowlers, and flint locks.

World famous, the Ketland family of English gun and flint lock makers opened an American branch, to supply our large market.

Neatly assembled, polished inside, and well tuned, this attractive Golden Age era flint lock features a fly detent in the tumbler, which causes the sear tip to ride over the half-cock safety notch, to allow the use of a set trigger.

Ideal for use on a best quality Golden Age era American longrifle, circa 1790 to 1820, this lock is a wise choice, not only for its use of Siler internals with proven geometry and high reliability, but also for its correct style, and good sparking ability. This well made Classic Ketland flint lock is the work of Mr. Jim Chambers, whose skill is appreciated by flint shooters. His locks make sparks that sizzle.

We recommend using this lock with a 13/16” octagon barrel, up to a 1” octagon barrel. This will allow the top of the pan to be positioned on the centerline of the side flat of the barrel, without causing the mainspring to touch the diagonal flat.

Not yet pre-inlet into any preshaped stock, this new lock will be much appreciated by skilled gunmakers who have mastered the simple technique of hand inletting the lock, to create a unique rifle.

We recommend that you order a dozen Flint-#ENG-6 English 3/4" gun flints, too.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_175.pdf Last updated:4/25/2012 (104.38 KB)
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6
Availability: In Stock
Price: $2.00
Order Quantity:
frizzen spring screw, 6-40 thread, inside mount
frizzen spring screw, 6-40 thread, inside mount
Part Number: LOCK-GA-FR-FSX
Availability: In Stock
Price: $3.79
Order Quantity:
tumbler, 8-32 tapped, tempered, cut for fly
tumbler, 8-32 tapped, tempered, cut for fly
Part Number: LOCK-GA-FR-TU
Availability: In Stock
Price: $26.00
Order Quantity:
Tumbler screw, .5" diameter head, 8-32 thread
Tumbler screw, .5" diameter head, 8-32 thread
Part Number: LOCK-GA-FR-TX
Availability: In Stock
Price: $4.79
Order Quantity:
cock, 1.45" throw, wax cast steel, as cast
cock, 1.45" throw, wax cast steel, as cast
Part Number: LOCK-KL-FK-CO
Availability: Item is currently sold out.
Price: $18.00
Order Quantity:
  
lock plate with integral pan, .93" x 5.12", as cast
lock plate with integral pan, .93" x 5.12", as cast
Part Number: LOCK-KL-FK-PL
Availability: Item is currently sold out.
Price: $24.00
Order Quantity:
  
cock, 1.45" throw, wax cast steel, tapped 12-24 thread
cock, 1.45" throw, wax cast steel, tapped 12-24 thread
Part Number: LOCK-KL-FL-CO
Availability: Item is currently sold out.
Price: $32.00
Order Quantity:
  
frizzen spring, tempered, with roller
frizzen spring, tempered, with roller
Part Number: LOCK-KL-FL-FS
Availability: In Stock
Price: $28.00
Order Quantity:
frizzen screw, .820" length, 8-32 thread
frizzen screw, .820" length, 8-32 thread
Part Number: LOCK-KL-FL-FX
Availability: In Stock
Price: $3.79
Order Quantity:
top jaw, .83 x .85 oval, with .21" hole
top jaw, .83 x .85 oval, with .21" hole
Part Number: LOCK-KL-FL-TJ
Availability: In Stock
Price: $14.50
Order Quantity:
Bridle, wax cast steel, as cast, use two screws
Bridle, wax cast steel, as cast, use two screws
Part Number: LOCK-SL-FK-BR
Availability: Item is currently sold out.
Price: $13.00
Order Quantity:
  
Bridle screw, .55" long, 8-32 thread, use two
Bridle screw, .55" long, 8-32 thread, use two
Part Number: LOCK-SL-FK-BX
Availability: In Stock
Price: $3.79
Order Quantity:
Mainspring, wax cast steel, tempered
Mainspring, wax cast steel, tempered
Part Number: LOCK-SL-FK-MS
Availability: In Stock
Price: $23.00
Order Quantity:
Sear spring, die formed steel, tempered, use 8-32 screw
Sear spring, die formed steel, tempered, use 8-32 screw
Part Number: LOCK-SL-FK-SS
Availability: In Stock
Price: $14.00
Order Quantity:
Sear spring screw, .53" length, 8-32 thread
Sear spring screw, .53" length, 8-32 thread
Part Number: LOCK-SL-FK-SSX
Availability: In Stock
Price: $3.79
Order Quantity:
Sear screw, .71" length, 8-32 thread
Sear screw, .71" length, 8-32 thread
Part Number: LOCK-SL-FK-SX
Availability: In Stock
Price: $3.79
Order Quantity:
Fly detent, tempered, long, wax cast steel, fits right, left, large, or small Siler locks
Fly detent, tempered, long, wax cast steel, fits right, left, large, or small Siler locks
Part Number: LOCK-SL-FL-FL
Availability: In Stock
Price: $13.00
Order Quantity:
Sear, tempered, integral bearings, use 8-32 screw
Sear, tempered, integral bearings, use 8-32 screw
Part Number: LOCK-SL-FL-SE
Availability: Item is currently sold out.
Price: $20.00
Order Quantity:
  
frizzen, as cast, requires fitting
frizzen, as cast, requires fitting
Part Number: LOCK-SQA-FR-FR
Availability: In Stock
Price: $19.00
Order Quantity:
Top jaw screw, slotted, 12-24 thread
Top jaw screw, slotted, 12-24 thread
Part Number: LOCK-SS-FK-TJX
Availability: In Stock
Price: $6.99
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $15.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $29.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards