American Classic left longrifle Flint Lock, by L&R
Part Number: LOCK-LR-2175
Availability: In Stock
Price: $170.00
Order Quantity:
American Classic left longrifle Flint Lock, by L&R

New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise.

The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on the tumbler and sear minimize friction, essential during cold weather hunting. Improved cock geometry allows a shorter stroke, with better sparks thrown squarely into the pan. L&R’s new “one position” sear returns to the same angle whether uncocked, half-cocked or full-cocked. Trigger engagement can be perfect.

Made to fit the large Siler mortise, this plate is about .005” larger, to insure a tight fit. The longer tail must be inlet, or filed to fit. A thick bolster spaces this lock farther from the barrel, for widely spaced lock panels that instantly identify an early rifle. Thin the bolster for a more graceful look or to match the Siler.

L&R’s clever fly detent and frizzen seal lip are included in this lock. These improvements have become a signature of L&R’s fine workmanship, of late. This frizzen spring uses a inside screw. It avoids the tight bend at front, a weak point on some locks.

A matching “early Classic” flint lock, without the pan bridle, and percussion “conversion” lock are available.

Once known as the Vance Flint Lock, our friends at L&R have fine tuned the improvements. New L&R parts fit the Vance lock, except tumbler, fly, and bridle must be installed as a group.

With Siler styling, wide bolster, tight fit to mortise, turned bearings, sealed frizzen with roller, one position sear, cam-action mainspring, and improved cock geometry, this is a nice lock.

Spare parts for the Classic flintlock are machined and tempered, ready to use, with little or no fitting. With the exception of the frizzen which must be fitted before hardening.

This lock exactly matches our right hand Classicflint lock.

We recommend that you order a dozen Flint-#ENG-6 English 3/4" gun flints, too.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_170.pdf Last updated:4/25/2012 (110 KB)
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6
Availability: In Stock
Price: $2.00
Order Quantity:
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $3.25
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $2.00
Order Quantity:
sear spring, left, die formed steel, tempered
sear spring, left, die formed steel, tempered
Part Number: LOCK-LR-200-SS
Availability: In Stock
Price: $4.25
Order Quantity:
frizzen spring screw, cut to .400", 6-40 thread
frizzen spring screw, cut to .400", 6-40 thread
Part Number: LOCK-LR-1100-FSX
Availability: In Stock
Price: $2.00
Order Quantity:
frizzen roller bearing & pin, tempered steel
frizzen roller bearing & pin, tempered steel
Part Number: LOCK-LR-1100-RP
Availability: In Stock
Price: $3.00
Order Quantity:
Frizzen screw, .825" length, .170" head diameter, 6-40 thread
Frizzen screw, .825" length, .170" head diameter, 6-40 thread
Part Number: LOCK-LR-1200-FX
Availability: In Stock
Price: $2.75
Order Quantity:
Top jaw screw, slotted head, 1/4-28 thread
Top jaw screw, slotted head, 1/4-28 thread
Part Number: LOCK-LR-1200-TJX
Availability: In Stock
Price: $5.00
Order Quantity:
Tumbler screw, .437" head, 6-40 thread
Tumbler screw, .437" head, 6-40 thread
Part Number: LOCK-LR-1200-TX
Availability: In Stock
Price: $3.75
Order Quantity:
bridle screw, .625" length, 6-40 thread
bridle screw, .625" length, 6-40 thread
Part Number: LOCK-LR-2100-BX
Availability: In Stock
Price: $2.00
Order Quantity:
top jaw, wax cast steel, .80" x .94" oval, .25" hole
top jaw, wax cast steel, .80" x .94" oval, .25" hole
Part Number: LOCK-LR-2100-TJ
Availability: In Stock
Price: $9.50
Order Quantity:
bridle, left, wax cast steel, use two 6-40 screws
bridle, left, wax cast steel, use two 6-40 screws
Part Number: LOCK-LR-2175-BR
Availability: In Stock
Price: $18.00
Order Quantity:
cock, left, wax cast steel, 1.49" throw, tapped 1/4-28
cock, left, wax cast steel, 1.49" throw, tapped 1/4-28
Part Number: LOCK-LR-2175-CO
Availability: In Stock
Price: $18.50
Order Quantity:
frizzen, left, wax cast steel, as cast, temper after fitting
frizzen, left, wax cast steel, as cast, temper after fitting
Part Number: LOCK-LR-2175-FR
Availability: In Stock
Price: $27.00
Order Quantity:
frizzen spring, left, wax cast steel, tempered
frizzen spring, left, wax cast steel, tempered
Part Number: LOCK-LR-2175-FS
Availability: In Stock
Price: $22.50
Order Quantity:
Mainspring, left, tempered steel, tempered
Mainspring, left, tempered steel, tempered
Part Number: LOCK-LR-2175-MS
Availability: In Stock
Price: $27.00
Order Quantity:
sear, left, wax cast steel, tempered, use 6-40 screw
sear, left, wax cast steel, tempered, use 6-40 screw
Part Number: LOCK-LR-2175-SE
Availability: In Stock
Price: $18.00
Order Quantity:
tumbler, left, wax cast steel, cut for fly, tapped 6-40
tumbler, left, wax cast steel, cut for fly, tapped 6-40
Part Number: LOCK-LR-2175-TU
Availability: In Stock
Price: $26.00
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $15.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: Item is currently sold out.
Price: $29.99
Order Quantity:
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards