Lyman Deerstalker,
.50 caliber, 24" barrel,
percussion, walnut, rubber recoil pad,
factory installed fiber optic sights,
factory new in-the-box, unfired
Part Number: LYMAN-DEER-50-P
Availability: In Stock
Price: $455.99
Order Quantity:
The Lyman Deerstalker right hand percussion rifle is stocked in walnut with a factory installed rubber recoil pad and sling swivel mounts. The black oxide finished furniture includes a single trigger with large bow for a hunter's gloved finger. The 24" octagon barrel is fitted with factory installed Lyman fiber optic sights and served with a black synthetic ramrod. Stock photo shown.

Weighing in at just under 8 pounds the rifle has a trigger reach of 14-1/4" making it well suited for today's average size shooter. The Lyman Deer Stalker is rifled with a 1 turn in 48" twist, to allow the choice of round balls, Maxi bullets, or Minie bullets.The walnut stock is fitted with a black rubber recoil pad, ideal for this handy rifle. The stock is shaped with an oval cheek piece for a right hand shooter. The lock is color case hardened to mottled grays, blues, and purples. The breech is fitted with a stainless steel 6-.75mm stainless steel nipple. The barrel was fitted with Lyman's red fiber optic front sight and green fiber optic adjustable rear sight for easy sighting in the field. The 3/8" ramrod is a sturdy flexible delrin material with a blued steel tip with 10-32 threads for loading and cleaning accessories. Sling swivel mounts have been fitted to the rifle. The rear swivel stud is mounted to the toe of the buttstock. The forward swivel stud is mounted to the middle ramrod pipe. Add your own quick disconnect swivels and you can carry this handy rifle all day.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, close the frizzen, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple. Place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

Select the rifle you desire, and click ADD TO CART, and complete the checkout. Inspect the item, return it for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
Part Number: BALL-50-385
Availability: In Stock
Price: $9.99
Order Quantity:
.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $12.59
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Nipple Wrench for Rifles, short style, with slotted end
Nipple Wrench for Rifles, short style, with slotted end
Part Number: NW-160
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Part Number: OX-15-50-W
Availability: In Stock
Price: $6.19
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod for Lyman Deer Stalker Rifle, 
3/8" dark brown Delrin nylon, 24-3/4" long. Brass tips are threaded 10-32 at rear, 8-32 at front.

Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Lyman Deer Stalker Rifle, 3/8" dark brown Delrin nylon, 24-3/4" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-246-LYM
Availability: In Stock
Price: $17.99
Order Quantity:
Nipple, 6-.75mm metric thread, for Lyman Great Plains Rifle & Pistol, Trade Rifle, InvestArms, Cabela's Hawken rifles, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 6-.75mm metric thread, for Lyman Great Plains Rifle & Pistol, Trade Rifle, InvestArms, Cabela's Hawken rifles, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RLP-S
Availability: In Stock
Price: $5.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $6.99
Order Quantity:
Vent,
Touch Hole Liner,
6-.75mm thread, stainless steel,
slotted for easy removal
for Lyman Great Plains, Trade, & Deerstalker rifles
Vent, Touch Hole Liner, 6-.75mm thread, stainless steel, slotted for easy removal for Lyman Great Plains, Trade, & Deerstalker rifles
Part Number: THL-LYMAN-S
Availability: In Stock
Price: $4.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards