Double Shotgun,
12 gauge, 28" barrels,
percussion, walnut, blued, fiberglas ramrod,
used, by Davide Pedersoli
Part Number: AAR-548
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This nice double percussion shotgun is stocked in walnut and trimmed in blued and color case hardened steel furniture. The front action locks are factory engraved with a floral pattern. The gun was manufactured by Davide Pedersoli of Italy. Weight is 7.3 pounds to help absorb the recoil from the 12 gauge bores. The 13-3/8" and 14-3/8" trigger reach should fit today's average shooter quite well. Offered as used this shotgun appears to be in near new condition with the addition of a fiberglass ramrod.

The polished and blued barrels are 28" long including the breech plug. The 12 gauge bore measure .720" at the muzzle and bore are cylinder bore, allowing the use of lead or bismuth shot or a patched round ball. Both bores are mirror bright, indicating it has seen little use and been very well maintained. The front sight is a standard brass bead. The Italian proof marks and manufacturer marks have been neatly placed at the bottom of the breech end of the barrel for a period appearance. Only the serial number is visible on the side of the left hand barrel.

The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, making it comfortable with full loads. The long tang is color case hardened, and factory engraved to match the triggerguard, locks, and barrel breeches. The forend is has a single key that retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. The fiberglas ramrod is fitted with a brass shotgun style loading tip on one end and a brass tip with 10-32 threads for loading and cleaning accessories on the opposite end. The fiberglas ramrod fits very snugly due to the rigid rod. No cheekpiece is carved, making this shotgun equally handy for right or left hand shooters. The wedge key is slotted and fitted with a capture pin, which prevents it from becoming lost in the field, exactly like better original guns.

Remove the two standard 1/4-28 nipples, using our #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our #Jag-12-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with WD-40 or other water displacing oil.

The Pedersoli shotgun locks are case colored and engraved with a floral pattern. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure. Davide Pedersoli double shotguns use our standard 1/4-28 nipple. However, he taps the thread seats to the minimum size, knowing that normal use will wear the nipple threads, over time, enlarging them to better fit a standard nipple. Our standard 1/4-28 nipples are quite snug in the thread seats. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads, and install the nipples. Our 1/4-28 nipples are the correct size.

A great used double barrel percussion shotgun! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.690" round balls, pure lead, hand cast, per 25
.690" round balls, pure lead, hand cast, per 25
Part Number: BALL-690-X
Availability: In Stock
Price: $12.99
Order Quantity:
.715" round balls, pure lead, hand cast, per 25
.715" round balls, pure lead, hand cast, per 25
Part Number: BALL-715-X
Availability: In Stock
Price: $12.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Part Number: BRUSH-75
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Part Number: FS-69-10
Availability: In Stock
Price: $4.79
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Part Number: JAG-12-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .690" round ball mold,
single cavity, with handles
Lee .690" round ball mold, single cavity, with handles
Part Number: LEE-690
Availability: In Stock
Price: $21.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.99
Order Quantity:
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-690
Availability: In Stock
Price: $75.99
Order Quantity:
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-715
Availability: In Stock
Price: $75.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Part Number: OX-18-60-D
Availability: In Stock
Price: $3.69
Order Quantity:
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-20-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
12 gauge shotgun Premium Lubed Wad,
bag of 100 lubricated felt wads
12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-12-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Adaptor for rod tip, stainless steel, knurled center, 
10-32 male to 5/16-27 female
Adaptor for rod tip, stainless steel, knurled center, 10-32 male to 5/16-27 female
Part Number: SA-10
Availability: In Stock
Price: $2.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-12-A
Availability: In Stock
Price: $9.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-12-B
Availability: In Stock
Price: $9.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-12-C
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards