Cherry's Deluxe Creedmoor
Rolling Block Match Rifle

caliber 45-70 Government, 34" octagon-to-round barrel,
single trigger, checkered walnut stock, Browning Soule tang sight,
used, by Davide Pedersoli
Part Number: AAR-496
Availability: In Stock
Price: $1,699.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
This nice Remington Rolling Block rifle was built by Davide Pedersoli of Italy for Cherry’s of Greensboro, North Carolina, and is so marked on the top flat of the barrel. The 34” octagon-to-round barrel is chambered for the long lasting and ever popular .45-70 Government round. Stocked in European walnut the rifle has been neatly finished and is in very good shape. Only a few very minor handling marks can be found anywhere in the surface of the wood and the metal has only a few tiny wear marks, specifically forward on the barrel. With an overall weight of 11.7 pounds this rifle is best suited for its intended purpose, as a Creedmoor match rifle. The trigger reach of 14-1/2 inches combines with the weight to make this rifle suitable only for today’s larger sized shooter, someone over 6’ in height.

Our front view shows the Sporting Rifle buttplate, single trigger, and classic appearance of the Remington Number 1 Rolling Block Action, as replicated by Davide Pedersoli. Much stronger than a Trapdoor Springfield, the factory recommends shooting factory ammunition, but we prefer black powder hand loads, for economy, accuracy, compliance with club match rules, and the pleasure of doing it the old way. In excellent condition the European walnut stock, which has been stained a medium brown and has a semi-gloss finish, has only a few tiny handling marks from use. N

The tang is drilled and tapped and has had a Browning Soule style Vernier tang sight installed. No rear sight has been installed on the barrel which is common on target rifles. Measuring 34” in length the octagon breech is 12-1/2" long before transitioning to round. The top flat of the barrel is marked with the previously mentioned Cherry’s and Pedersoli stamping. The 3/8" dovetail at the muzzle end is fitted with a Lyman No. 17 globe front sight with an aperture insert installed. Order our #FS-17-INSERT for a full set of inserts for this sight.

Our bottom view of the rifle shows off the rounded toe of the gun, the pistol grip and the color case hardened receiver. It is near the toe that one of the few handling marks on the gun can be found; just a slight bump has cause a tiny dent in the wood. Forward the forearm is in very nice shape as well, it is finished off with a silver forend cap that has been pinned into position.

The Number 1 action has a grooved face on the hammer spur and breech block spur. This nice single shot rifle has a strong mainspring, yet a smooth crisp trigger release. It will be enjoyable to shoot. This is a replica of the later style Number 1 action, with rotary extractor, for positive cartridge extraction. The hammer and breech block are blued steel. No tell-tale rotary scratches or wear can be seen on the breech block or hammer, which would indicate a lot of use. Color case hardened the action is quite lovely, a deep blue background with various swirls of gray and yellow coloration. Made with near perfect symmetry, only the finger spur of the breech block is offset to the right. Thus, this rifle is equally comfortable for a right or left hand shooter.

We stock .45-70 dies. We strongly prefer black powder handloads, and especially the 500 grain original U. S. Army - Frankfort Arsenal bullet, now known as the Lyman 457-125 bullet. We recommend 500 grain cast lead alloy bullets, sized to fit the grooves, with SPG lubricant, over our thin card wad. You can easily assemble your own cartridges using our inexpensive reloading tools and molds. The bore is clean and bright, in perfect condition.

This rifle will require load development, and fine tuning, for serious target competition. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, 400, and 600 yard range. If you enjoy shooting, recording results, and creating loads, order this rifle, today.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: In Stock
Price: $0.56
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: In Stock
Price: $25.50
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: In Stock
Price: $49.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.25
Order Quantity:
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $36.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $13.99
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $3.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.29
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: In Stock
Price: $75.99
Order Quantity:
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $5.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.79
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $52.59
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $29.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $29.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.19
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards