Rocky Mountain Hawken Rifle,
.54 caliber, 34" barrel,
percussion, curly maple, color case hardened iron,
used, by Davide Pedersoli
Part Number: AAR-450
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co. The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle is used with a few handling marks on the stock and wear on the brown finish typical of handling and cleaning. Weighing in at 10.4 pounds the rifle has a trigger reach of 13-3/4" making it well suited for today's average size shooter.

The barrel measures 34" in length and has a deep plum brown finish. The barrel is rifled with seven lands and grooves in a slow twist for a patched round ball. A Rocky Mountain step adjustable rear sight, which sits 4" ahead of the breech, serves as the rear sight. The front sight is a nickel silver blade with an iron base. The rifle has all the required Italian markings on the off flat near the breech, including serial number, caliber and proofs. We recommend using a .530" swaged round ball, #Ball-530, combined with a .015" dry patch, #OX-15-50-D, lubed with our best patch lubricant, #Mink-Oil. This combination should result in good accurate shooting.

Stained a lovely whiskey brown, the curly maple stock has scattered figure through the buttstock into the forearm. The buttplate is fitted with a modestly curved buttplate to engage the shooter's shoulder. All of the furniture is color case hardened in traditional fashion. Ahead of the comb, the wrist is reinforced by the long tang of the hooked breech system. Remove the two wedge keys, along with the ramrod, and the barrel can be easily lifted from the stock for easy cleaning. Two bolts engage the tang and pass through the stock to connect with the long triggerplate below.

From below the classic iron toeplate that protects the toe, ending in a beaver-tail finial, can be seen. This toeplate is a popular theme found on the Hawken rifle. The long trigger bar, anchored to the long tang with two tang bolts, supports and reinforces the wrist. A desirable feature for a mountain man in the foothills of the Rocky Mountains, many days by horseback and keel-boat from Sam Hawken's gun shop in Saint Louis. Strength made the Hawken rifle famous! The forend is fitted with the color case hardened steel forend cap, and an iron ramrod entry pipe. The sturdy 3/8" brown ramrod with brass tip is threaded to accept 10-32 worms and accessories. The single lock bolt, and iron tear drop escutcheon, fitted flush with the side panel, are classic features of a half-stock Hawken plains rifle, from the 1835 - 1845 era. A beaver-tail shaped cheek piece adds comfort for a right hand shooter, the cheek is angled to the rear, to recoil away from your face, an ingenious feature found on better rifles. The balance point is just under the forward wedge key, for steady aiming.

This is a correctly made Hawken lock for this fur trade era percussion rifle, with a strong mainspring, stirrup link, and a fly detent to allow set triggers. The lock plate and hammer are color case hardened, in a rainbow of mottled colors. The vibrant color case hardening remains bright on the lock and can also be seen on the triggerplate below.

Double lever double set triggers may be set, or the lock cocked, in any sequence. Triggers fire set or unset, for target match shooting, or cold weather hunting with gloved fingers. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. When screwed fully inboard, the adjustment screw disables the rear trigger, so the rifle must be fired from the front trigger, which requires about a four pound pull for release. It is wise to disable the rear trigger, when hunting in very cold weather. But the set trigger can provide very light release, perhaps an ounce or two, for accurate aimed shooting during pleasant weather.

If you are looking for a good half stock Plains rifle, consider this one. This Hawken rifle has been nicely produced. Stocked in figured curly maple. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: In Stock
Price: $43.99
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards