1861 Colt Navy Revolver
.36 caliber, 7-1/2" barrel,
percussion, blue, brass, walnut,
unfired, by Aldo Uberti
Part Number: AAR-328
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
Unfired, in the factory carton this revolver was made by the famous Aldo Uberti & Company. Known as the Colt Model 1861 Navy revolver, it is .36 caliber with a 7-1/2” blued barrel, factory engraved cylinder, color case hardened steel frame, brass back strap, brass triggerguard, and walnut grips.

The 7-1/2" round barrel has the CAL .36, BLACK POWDER ONLY, A. UBERTI, ITALY marks hidden under the loading lever. No obvious handling marks were found on the gun. No markings can be found on the top of the barrel. The brass triggerguard and backstrap have become slightly tarnished with time and storage. This tarnish is the result of normal handling, and can be wiped away to restore the brilliant factory polish, if you wish. We prefer not to polish away the honest patina on the brass. This replica is a fine example of a Navy revolver. The frame, hammer, and loading lever are color case hardened in mottled colors. The barrel and cylinder are blued. We admire the correct reddish brown color of the grips that match the original Colt issue colors.

We recommend 21 grains of GOEX FFFg powder, and a .375" round ball, for best accuracy. Cover each ball with a small amount of our #Lube-SPG bullet lubricant or our #Mink-Oil. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn prematurely. Continued use will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.

A great in-the-box 1861 Navy revolver that will be a joy to shoot! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
.375" round balls, pure lead, Hornady, per 100
.375" round balls, pure lead, Hornady, per 100
Part Number: BALL-375
Availability: In Stock
Price: $8.29
Order Quantity:
.380" round balls, pure lead, hand cast, per 100
.380" round balls, pure lead, hand cast, per 100
Part Number: BALL-380-X
Availability: In Stock
Price: $10.99
Order Quantity:
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: In Stock
Price: $6.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
Nipple Wrench for Revolvers, for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess.
Part Number: NW-140
Availability: In Stock
Price: $6.99
Order Quantity:
.36 caliber revolver Ox-Yoke Wonder Wad,
bag of 100 lubricated felt wads
.36 caliber revolver Ox-Yoke Wonder Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-36-W
Availability: In Stock
Price: $7.29
Order Quantity:
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remington revolvers, #11 CCI cap, hardened steel

Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remington revolvers, #11 CCI cap, hardened steel
  • Cone length: 0.300"
  • Thread journal length: 0.200"
  • Overall length: 0.500"
  • Diameter of base: 0.307"
Part Number: PCC-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remington revolvers, #11 CCI cap, stainless steel

Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"
Nipple, 12-28 thread, for Colt brand, for Uberti 1851 Navy & 1860 Army Colt, and Uberti 1858 Remington revolvers, #11 CCI cap, stainless steel
  • Cone length: 0.300"
  • Thread journal length: 0.200"
  • Overall length: 0.500"
  • Diameter of base: 0.307"
Part Number: PCC-S
Availability: In Stock
Price: $4.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards