Model 1851 Navy Revolver,
.44 caliber, 7-1/2" barrel,
percussion, steel frame, blued, used,
by Armi San Marco
Part Number: AAR-490
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This replica Model 1851 Colt Navy Revolver. The term "Navy" indicates that it is .36 caliber, while the .44 caliber were "Army". In all actuality, the U. S. Army bought more of the 1851 Navy Model revolvers than the U. S. Navy purchased. The revolver was manufactured by Armi San Marco. This revolver used with a drag line on the cylinder, and wear on the blue finish on the edges and some holster wear with brown speckling near the muzzle. The brass triggerguard has the common military style shape and has aged to a dark patina.

The top flat of the barrel is unmarked, the lower right hand flat is stamped S.M. BLACK POWDER ONLY .44 CAL MADE IN ITALY. The pointed brass bead front sight is mounted near the muzzle. A notch in the hammer, serves as a rear sight. The notch in the hammer is small, for those who prefer a fine sight picture. The cylinder is factory roll engraved with a Naval battle scene, as found on the original Colt 1851 Navy revolver. Walnut grips are factory varnished to a satin finish, mounted in Colt style, finished in the classic Colt reddish brown color, made of one piece of walnut

We recommend that you charge the cylinder with about 21 grains of GOEX FFFg powder, set a pure lead .454" round ball on the cylinder, and press the ball into position with the brass loading tool. Seal the cylinder with grease, and prime with #11 caps. This revolver is fitted with the factory blued steel nipples, which are designed for European caps. We recommend replacing them with our #PTC-PS stainless steel, or #PTC-PI hardened steel, 12-28 nipples for use with No. 11 CCI or Remington percussion caps. Use our #NW-130 nipple wrench to remove the nipples. Apply a touch of #BC-CTL Birchwood Casey's Choke Tube Lubricant to the threads of the nipples, before re-installing them. This anti-seize will prevent the nipples from becoming stuck, a real problem with neglected revolvers.

Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge using our #TOOL-KEY-B, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued use will cause the cylinder and latch to become out-of-time.

Simple cleaning and maintenance will prevent revolver problems! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.451" round balls, pure lead, Hornady, per 100
.451" round balls, pure lead, Hornady, per 100
Part Number: BALL-451
Availability: In Stock
Price: $11.49
Order Quantity:
.454" round balls, pure lead, Hornady, per 100
.454" round balls, pure lead, Hornady, per 100
Part Number: BALL-454
Availability: In Stock
Price: $11.49
Order Quantity:
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: In Stock
Price: $6.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads
Part Number: FLASK-COLT
Availability: Out of Stock, request notification when available
Price: $33.99
  
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Nipple Wrench for Revolvers, 
for 1858 Remington .44 Revolver, Ruger Old Army,
.31 & .36 Pocket & Police Model Colt Revolvers,
and other revolvers with a tight nipple recess
Nipple Wrench for Revolvers, for 1858 Remington .44 Revolver, Ruger Old Army, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess
Part Number: NW-130
Availability: In Stock
Price: $6.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
Nipple, 5.5-.9mm metric thread, for .31/.36 Colt and Remington pocket revolvers, #11 CCI cap, hardened steel

Cone length: 0.285" Thread journal length: 0.200" Overall length: 0.485" Diameter of base: 0.290"
Nipple, 5.5-.9mm metric thread, for .31/.36 Colt and Remington pocket revolvers, #11 CCI cap, hardened steel
  • Cone length: 0.285"
  • Thread journal length: 0.200"
  • Overall length: 0.485"
  • Diameter of base: 0.290"
Part Number: PTC-PI
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 5.5-.9mm metric thread, for .31/.36 Colt and Remington pocket revolvers, #11 CCI cap, stainless steel

Cone length: 0.285" Thread journal length: 0.200" Overall length: 0.485" Diameter of base: 0.290"
Nipple, 5.5-.9mm metric thread, for .31/.36 Colt and Remington pocket revolvers, #11 CCI cap, stainless steel
  • Cone length: 0.285"
  • Thread journal length: 0.200"
  • Overall length: 0.485"
  • Diameter of base: 0.290"
Part Number: PTC-PS
Availability: In Stock
Price: $4.99
Order Quantity:
Drift Punch,
knurled brass,
for wedge keys and sights.
Drift Punch, knurled brass, for wedge keys and sights.
Part Number: TOOL-KEY-B
Availability: In Stock
Price: $4.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards