Jacob Dubbs Longrifle,
.40 caliber, 42" barrel,
percussion, curly maple, brass trim,
by Bob Cowie
Part Number: AAR-446
Availability: In Stock
Price: $1,379.00
Order Quantity:
This percussion longrifle was constructed by Bob Cowie. This Lehigh Valley longrifle is interpreted after an original attributed to Jacob Dubbs. Stocked in curly maple, the gun is trimmed in brass furniture, and features a percussion conversion lock. The .40 caliber bore is bright and ready to shoot. Trigger reach is 14-1/4" and the weight is 10.1 pounds.

The 42" long .40 caliber straight octagon barrel is 7/8" wide by Green Mountain. The cut rifled barrel has eight equal lands and grooves with a slow twist for a tightly patched round ball. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. The left oblique flat is marked with the Green Mountain logo and 40 CAL near the breech. The browned barrel is fitted with a flat top rear sight dovetailed 7-1/2" ahead of the breech and a silver blade front sight with copper base is dovetailed 2-1/2" behind the muzzle. The barrel is retained to the stock with three steel pins.

The curly maple stock is finished to a blond color with black highlights in low areas. The stock has a few handling and finishing marks. In our top view the long cast engraved comb of the buttplate can be seen. The wide brass buttplate is retained with two steel screws. The straight tang is retained with a single bolt engaging the trigger plate below. From below, the wide toeplate can be seen, along with the cast engraved brass triggerguard that has been pinned to the stock. No muzzle cap is fitted and the end of the forearm is rounded over before it stops 1/2" short of the muzzle. The 3/8" wooden ramrod is secured by three ramrod pipes, one entry and two forward. A brass tip has been fixed to the ramrod, threaded 8-32 it is ready to accept your shooting and cleaning accessories. The left view shows the rather blunt square cheekpiece carved into the buttstock. A cast engraved brass sideplate is fitted in the dominate side panel. Two large head lock bolts engage the lock on the opposite side.

Ignition for the gun is provided by a percussion conversion lock by Larry Zornes. This conversion lockplate shows the remains of the flint lock pan. The lock is browned to match the barrel and features a strong mainspring that functions as it should. A stainless steel musket nipple is fitted to the powder drum. The single trigger is pinned high to provide a smooth release.

This .40 caliber longrifle is ready to shoot! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.395" round balls, pure lead, Hornady, per 100
.395" round balls, pure lead, Hornady, per 100
Part Number: BALL-395
Availability: In Stock
Price: $9.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .40 caliber brass collar, 8-32 thread
Ball puller, steel screw, .40 caliber brass collar, 8-32 thread
Part Number: BP-40-8
Availability: In Stock
Price: $3.50
Order Quantity:
Fouling Scraper, flat face, brass, .40 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .40 caliber, 8-32 thread
Part Number: FS-40-8
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .40 caliber, 3/8" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .40 caliber, 3/8" rod, 8-32 thread
Part Number: JS-40-6-8
Availability: In Stock
Price: $3.99
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $3.19
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards