Halfstock Plains Rifle
.54 caliber, 29" straight octagon barrel,
walnut, iron trim, large Siler percussion lock, used
Part Number: AAR-015
Availability: In Stock
Price: $1,349.00
Order Quantity:
This used halfstock Plains Rifle is stocked in black walnut and trimmed in iron furniture. The rifle is assembled around a .54 caliber 15/16" octagon by 29" straight octagon barrel that gives it a handy length and modest weight. The large Siler percussion lock is mated to Ron Long designed double lever double set triggers that fire set or unset. Weighing in at 7.3 pounds the Plains Rifle has a trigger reach of 13-5/8" making it well suited for today's average size shooter.

The Green Mountain barrel is 15/16" straight octagon with a 29" overall length. The .54 caliber bore is rifled with eight equal lands and grooves with a 1 in 70" twist for a patched round ball. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. The bore is bright and has been well maintained. We recommend our .530" pure lead round ball, patched with .015" Ox-Yoke patching, lubricated with our Mink Oil tallow patch grease, if you require best accuracy. A semi buckhorn rear sight is dovetailed 9" ahead of the breech, a nickel silver blade with brass base front sight is dovetailed to position it just behind the muzzle.

Stocked in black walnut stained to a warm brown tone and finished to a semi-gloss. The rifle is trimmed in browned iron furniture with a mid to late 19th century style. The buttplate has a deep curve to engage the shooter's shoulder. The triggerguard has a wide bow to accept the double lever double set triggers and a fish lip style pistol grip in Eastern halfstock style. Used, the stock has a few handling marks, and the brown finish shows some wear on areas that are frequently handled.

The long iron tang of the hooked breech strengthens the wrist. The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the keys past the underlugs, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the 1/4-28 nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

The toeplate is held in place by two small screws and functions to protect the delicate toe of the rifle during the loading and cleaning processes. The iron triggerguard has been mounted to the triggerplate. The long trigger bar, anchored to the long tang with two tang bolts, supports and reinforces the wrist. The forearm of the stock is fitted with a steel forend cap. A iron ramrod entry pipe is fitted behind the muzzle cap. The ramrod itself is finished with a brass tip that is threaded 10-32 for your loading and cleaning attachments. A mid 19th century steel sideplate is fitted to the rifle. The sideplate is strangely positioned with the upper edge above the edge of the lock panel. A single bolt passes through the plate and stock to engage the lock on the opposite side. Further back on the gun the classic beaver tail style cheek can be seen.

Ignition for the rifle is provided by a large Siler caplock. The lock plate is notched to support the powder drum and stainless steel nipple. The lock is finished with a matte brown, and shows some wear from handling and use. Double lever double set triggers by R.E. Davis are properly tuned to fire set or unset, for target match shooting, or cold weather hunting with gloved fingers. You may cock the lock before or after setting the triggers.

This .54 caliber Plains style rifle has a modest weight and a handy barrel length making it easy to carry in the field. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: In Stock
Price: $43.99
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $3.99
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards