Northwest Trade Gun,
20 gauge, 40" octagon-to-round barrel,
R.E. Davis Trade flintlock, black walnut, iron and brass trim,
new, unfired, by S. Krolick
Part Number: AAR-585
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
Beautifully assembled and stamped with period inspection and proof marks this well made North West Trade Gun would be ideal for your late fur trade impression. Stocked in dense American black walnut, this classic North West Trade Gun has straight grain, selected for strength. Correctly fitted with traditional trade gun hardware, a mix of brass and iron, this 20 gauge flint fowling gun is as pretty as it is functional. This nice flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets, and bird shot at clay birds on the trap range. Scratch built by contemporary maker S. Krolick this Trade Gun is as new with a few marks on the frizzen face. Trigger reach is 14" to fit today's average size shooter and weight is 7.6 pounds.

The 40" Colerain barrel is octagon-to-round, with a double wedding band transition to tapered round to the muzzle. A brass blade front sight is soldered behind the muzzle, no rear sight is fitted. The bore is .615" diameter, for our cast lead round ball and patch. We recommend our .595" pure lead round ball, patched with .010" Ox-Yoke patches, lubricated with Ox-Yoke Wonder Lube, for easy loading. We offer 20 gauge (.62 caliber) wads, cards, and shot for wing shooting. This trade gun has no rear sight, allowing it to qualify under NMLRA Trade Gun Match rules.

The long baluster wrist runs from the lock panels to the toe, and the comb seems to sit on top of the flowing wrist. This is classic architecture for early English muskets, especially the early Sea Service muskets, which apparently served as a model for the North West Trade Gun. The design is simple and functional, and these inexpensive guns were imported and sold by the Fur Trade Companies, for many decades. Flint and percussion trade guns were still popular long after the metallic cartridge arrived, due to the low cost of ammunition for muzzle loading guns. The lock plate is marked and dated Barnett 1856. The buttstock has an inspector's cartouche from Edward Bond of the Hudson's Bay Company. The buttplate is stamped 335. The top flat of the barrel is stamped with the Edward Bond sitting fox inspection mark. . The quarter flat at the breech is stamped with period view, proof, and barrel maker's marks. The 40" long tapered octagon-to-round barrel has a well aged silvery gray patina.

This bottom view shows the traditional large iron triggerguard, hand finished and burnished bright and patina aged to match the barrel. The triggerguard of this North West Trade Gun is correctly surface mounted. Two screws retain the rear of the triggerguard while an inverted tang bolt retains the front. No ramrod entry pipe is fitted, another correct feature. The two forward pipes are thin brass, with embossed grooves, much like the corrugations in cardboard, to give the pipes maximum strength against crushing or denting in hard use. The pipes allow the 3/8" ramrod to slide smoothly, to serve the barrel. The ramrod does not have any provisions for threaded accessories.

The large R. E. Davis Company Trade Gun Lock is finished to a speckled gray patina. This big flintlock sparks well using our #Flint-ENG-8 hand knapped English 1" gun flints, by Tom Fuller. The lock plate is stamped with the inspection mark of Edward Bond below the pan and Barnett 1856 across the tail. Behind the pan a direct drilled touch hole in the barrel is well centered on the pan. Below the lock a single trigger has been properly installed to give good leverage against the sear.

Three lock bolts screws retain the sideplate and lock. The rear sideplate screw is actually a matching wood screw. The brass sideplate is cast in the form of a serpent, a traditional motif for the North West Gun. Unlike surface mounted sideplates, this serpent is neatly inlet flush with the side panel. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets.

As-new unfired this North West Trade Gun has slender shaping and well fitted furniture. The bore is clean and bright, ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $12.99
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $9.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Part Number: BORE-MOP-62-10
Availability: In Stock
Price: $3.19
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Part Number: BP-62-10
Availability: In Stock
Price: $4.50
Order Quantity:
Bore brush, bronze, for .62 caliber, 10-32 thread
Bore brush, bronze, for .62 caliber, 10-32 thread
Part Number: BRUSH-62-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Part Number: JAG-20-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .600" round ball mold,
double cavity, with handles,
for .62 rifles and 20 gauge guns.
Lee .600" round ball mold, double cavity, with handles, for .62 rifles and 20 gauge guns.
Part Number: LEE-600-DC
Availability: In Stock
Price: $21.99
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: In Stock
Price: $75.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: In Stock
Price: $9.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $9.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $9.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards