Doglock Fowling Gun,
12 gauge , 36" octagon-to-round barrel,
black walnut, brass and iron,
signed by Gary White
Part Number: AAR-121
Availability: In Stock
Price: $1,549.00
Order Quantity:
This Doglock fowling gun was created by contemporary gun maker Dr. Gary White and is initialed on the top of the barrel. This large bore fowler is stocked in black walnut and trimmed in a mixture of brass and iron furniture. Forming the heart of the fowler is a 36" octagon-to-round barrel finished to a dark brown. Weighing 6.7 pounds, the fowler has a trigger reach of 13-3/4" making it well suited for today's average size shooter. If you are looking for early fowler to round out your 18th century impression, this dog lock fowler would make a fine addition.

The octagon-to-round barrel has been finished to a smooth dark brown to match the doglock. The 12" octagon breech tapers to a sixteen flat transition to a double wedding band to round. The 12 gauge, .730" diameter bore is bright in as-new condition. We recommend using our a 12 gauge wads and cards with lead of bismuth shot with this smoothbore, or shoot a patched round ball. A brass blade sight is soldered behind the muzzle, no rear sight is fitted in fowling gun fashion.

Stocked in black walnut the stock is fitted with a wide buttplate in mid 18th century fashion. The wide nearly flat buttplate should help spread the felt recoil from the 12 gauge bore over a large area. The lock panels are shaped with long beaver tails and a panel of raised carving accents the rounded tang of the breech plug. The tang bolt is inverted, a common technique used on Trade Guns and muskets that omit the triggerplate.

The rounded toe of the buttstock fades into the lock panels. Moving forward on the stock the formed sheet iron triggerguard is finished bright and mounted with blued screws and the inverted tang bolt. The ramrod is fitted with a flared brass tip for seating wads and cards. The ramrod does not have any provisions for threaded accessories. The brass sideplate is cast in the form of a serpent. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets.

The flat faced lock is of the style made during the reign of William III, from 1689 until 1702. It was not uncommon for locks from earlier muskets to be recycled into Colonial muskets or fowlers. We have spark tested this hand assembled and tuned flint lock,and it sparks well. The safety dog is easily engaged by hand, at half cock. We recommend our 7/8" knapped English flints for use with this fowler.

Ignition is improved by a steel vent liner finished to match the barrel. This liner is perfectly centered and positioned well above the pan, to serve as a window on the center of the heat of priming flash. This is the optimum position for best ignition. Below the lock the trigger has been pinned into the stock giving good leverage against the sear bar. Yet not so high that it will overpower the half-cock position.

Appropriate for the mid to later half of the 18th century the gun could well have seen use into the early 19th century if properly maintained. This fowler will make an excellent addition to any black powder collection or 18th century impression. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.690" round balls, pure lead, hand cast, per 25
.690" round balls, pure lead, hand cast, per 25
Part Number: BALL-690-X
Availability: In Stock
Price: $12.99
Order Quantity:
.715" round balls, pure lead, hand cast, per 25
.715" round balls, pure lead, hand cast, per 25
Part Number: BALL-715-X
Availability: In Stock
Price: $12.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Part Number: BRUSH-75
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7
Availability: In Stock
Price: $2.25
Order Quantity:
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7-PACK-12
Availability: In Stock
Price: $22.99
Order Quantity:
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Part Number: FS-69-10
Availability: In Stock
Price: $4.79
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Part Number: JAG-12-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .690" round ball mold,
single cavity, with handles
Lee .690" round ball mold, single cavity, with handles
Part Number: LEE-690
Availability: In Stock
Price: $21.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.99
Order Quantity:
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-690
Availability: Item is currently sold out.
Price: $75.99
Order Quantity:
  
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-715
Availability: In Stock
Price: $75.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Part Number: OX-18-60-D
Availability: In Stock
Price: $3.69
Order Quantity:
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-20-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
12 gauge shotgun Premium Lubed Wad,
bag of 100 lubricated felt wads
12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-12-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Adaptor for rod tip, stainless steel, knurled center, 
10-32 male to 5/16-27 female
Adaptor for rod tip, stainless steel, knurled center, 10-32 male to 5/16-27 female
Part Number: SA-10
Availability: In Stock
Price: $3.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-12-A
Availability: In Stock
Price: $8.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-12-B
Availability: In Stock
Price: $8.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-12-C
Availability: In Stock
Price: $8.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards