Tennessee Mountain Rifle,
.45 caliber 42" Green Mountain barrel,
Davis flint lock, maple, iron trim, unfired
Part Number: AAR-393
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This Tennessee Mountain longrifle is stocked in maple and trimmed in iron furniture. The late Ketland lock by R.E. Davis is browned to match the .45 caliber Green Mountain barrel. This lightweight slim mountain rifle will be a joy to carry in the woods during your next deer hunt. Trigger reach is 13-1/2", for an average size shooter. Weight is 7.3 pounds.

The heart of the rifle is a 42" by 13/16" straight octagon .45 caliber Green Mountain barrel. The bore is bright, clean, and ready to shoot. The cut rifled barrel has eight equal lands and grooves with a slow twist for a tightly patched round ball. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. The browned barrel is fitted with a full buckhorn rear sight dovetailed 8-1/2" ahead of the breech and a brown iron blade front sight dovetailed 1-1/2" behind the muzzle. The barrel is retained to the stock with three steel pins.

The maple stock is stained to a warm brown tone. The stock has a few handling marks from use. The buttplate is browned to match the barrel and is retained with two steel screws. We note some slight inletting gaps around the buttplate. A grease hole is drilled into the right side of the buttplate. The hole is filled with tallow to grease your patches when shooting. The top view shows the long tang of the fixed breech. The bottom view shows the browned Tennessee style triggerguard, which is retained with two steel screws. A long browned toeplate protects the toe of this rifle during loading and it is retained with two steel screws.

The 3/8" wooden ramrod is mounted in two ramrod pipes, no entry pipe has been installed in true Tennessee fashion. The ramrod is fitted with an iron tip threaded 10-32 to accept cleaning and loading accessories. No muzzle cap is installed, another correct touch. The buttstock is shaped with a square cheek piece. The lock panel is fitted with two tear drop shaped sideplates that the lock bolts pass through. We noticed two small hairlinecracks extending from the upper sideplate to the breech. As new, this rifle is unfired.

This rifle is fitted with a late Ketland flint lock by R.E. Davis that is browned to match the barrel. This Ron Long designed lock incorporates many of the features invented by London's best gunmakers during the late flint period, prior to 1830. The cock points down to throw sparks directly into the pan. The water proof pan is shaped with rain gutters to each side. The frizzen glides over a roller bearing. We recommend our 5/8" knapped English flint #FLINT-ENG-5 for best performance in this lock.

Double lever double set triggers are tuned to fire in any sequence; you may cock the lock or set the trigger in any combination. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. The set trigger can provide very light release, perhaps an ounce or two, for accurate aimed shooting during pleasant weather.

Fast ignition is assured by the stainless vent liner, positioned well above the bottom of the pan, centered on the heat of the flash. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash.

This lightweight Tennessee Mountain rifle will be a joy to carry in the woods this Fall. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.440" round balls, pure lead, Hornady, per 100
.440" round balls, pure lead, Hornady, per 100
Part Number: BALL-440
Availability: In Stock
Price: $10.19
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Part Number: BP-45-10
Availability: In Stock
Price: $3.50
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $14.99
Order Quantity:
Fouling Scraper, flat face, brass, .45 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .45 caliber, 10-32 thread
Part Number: FS-45-10
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Part Number: JS-45-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $3.19
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
Pick & Brush,
brass brush with steel vent pick
Pick & Brush, brass brush with steel vent pick
Part Number: PICK-BRUSH
Availability: In Stock
Price: $12.00
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: Out of Stock, request notification when available
Price: $13.99
  
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards