Oversize Reforming Thread Taps, to repair worn or damaged 1/4-28 threads, set of three

Home > Gunsmithing > Tools > Taps, for cutting internal threads

Oversize Reforming Thread Taps,
to repair worn or damaged 1/4-28 threads, set of three

Part Number:	TOOL-RETAP-SET-3
Availability:
Price:	$41.99
Order Quantity:

Each set contains the three most commonly used taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), over size 1/4-28 taps.

These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily.

Sturdy hardened steel. Use a tap handle. Use tapping fluid. Properly used, these should last a lifetime. They can be carelessly damaged, chipped, broken, and dulled. Not warranted against failure. Repairs are best performed by skilled gunsmiths, experienced machinists, or serious hobbyists.

Oversize threaded nipple, .255-28, 1/4-28 with .005" oversize thread, for CCI #11 cap, hardened steel, square shank, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-05-I
Availability:
Price:	$6.99
Order Quantity:

Oversize threaded nipple, .255-28, 1/4-28 with .005" oversize thread, for CCI#11 cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-05-S
Availability:
Price:	$6.99
Order Quantity:

Oversize threaded nipple, .260-28, 1/4-28 with .010" oversize thread, for CCI #11 cap, hardened steel, square shank, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-10-I
Availability:
Price:	$6.99

Oversize threaded nipple, .260-28, 1/4-28 with .010" oversize thread, for CCI #11 cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-10-S
Availability:
Price:	$6.99
Order Quantity:

Oversize threaded nipple, .265-28, 1/4-28 with .015" oversize thread, for CCI #11 cap, hardened steel, square shank, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-15-I
Availability:
Price:	$6.99
Order Quantity:

Oversize threaded nipple, .265-28, 1/4-28 with .015" oversize thread, for CCI #11 cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	ROS-15-S
Availability:
Price:	$6.99
Order Quantity:

Tap handle, accepts 1/4" to 1/2" diameter taps

Part Number:	TAP-W-14
Availability:
Price:	$11.99
Order Quantity:

.255-28 Reforming Thread Tap, +.005" oversize, for 1/4-28 threads, single tap, best used in sequence

Part Number:	TOOL-TAP-05
Availability:
Price:	$14.99
Order Quantity:

.260-28 Reforming Thread Tap, +.010" oversize, for 1/4-28 threads, single tap, best used in sequence

Part Number:	TOOL-TAP-10
Availability:
Price:	$14.99
Order Quantity:

.265-28 Reforming Thread Tap, +.015" oversize, for 1/4-28 threads, single tap, best used in sequence

Part Number:	TOOL-TAP-15
Availability:
Price:	$14.99
Order Quantity:

Top of Page Home > Gunsmithing > Tools > Taps, for cutting internal threads