Your search for 'Nipple'
returned
325 results.
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
Nipple , 7-1mm metric thread to REPAIR CVA, Traditions, Jukar and other Spanish made guns, nipple seat must be re-tapped to 7-1mm to accept this nipple . The nipple cone snugly fits the CCI No. 11 cap, or RWS No. 1075 cap. Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Use our #TAP-7-1MM tap
Nipple , 7-1mm metric thread to repair CVA, Traditions, Jukar and other Spanish made guns, nipple seat must be re-tapped to 7mm to accept this nipple . The nipple cone snugly fits the CCI No. 11 cap, or RWS No. 1075 cap, or Remington No. 11 cap. This nipple is precision made of hardened 416 stainless steel. The tiny orifice and internal nozzle geo
|
|
Powder Drums,
Machined from solid steel and drilled for a clean-out screw, included. We offer 7/16" drums for use with the Bedford, small Siler, and other small locks, and 1/2" drums for the large Siler, most L&R locks, and others. Predrilled drums are threaded for 1/4-28 nipples, unless specified otherwise. Use our 1/4-28 #RST-I, #RST-S, or #PST-S nipple. We s
|
|
Spring steel nipple pick , with bone bead handle
Our spring steel wire nipple pick, often referred to as a nipple prick, has an antique bone bead handle with deep red finial beads. Carry one in your possibles bag, to clear your vent or nipple.
|
|
Nipple, 7-.75mm metric thread to REPAIR Lyman Great Plains Rifle & Pistol, Trade Rifle, InvestArms, Cabela's Hawken and other Italian replica rifles, #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" 7-.75mm threads to be used to repair rifles with damaged 6-.75mm f
Nipple, 7x.75mm thread to repair Lyman and other Italaian, No. 11 cap, stainless steel, marked "LOS"
|
|
Nipple Wrench for Muskets , with slotted socket, for square or flat side nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered slotted end wrench works well for he
|
|
Nipple Wrench for Rifles & Shotguns , slotted end for #11 nipple
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered nipple wrench has two sturdy finger
|
|
Flush Nipple , 6-1mm thread for Spanish rifles, stainless steel, 1/4" square shank for nipple wrench, with tubing, fits CVA, Jukar, Traditions, Ardessa, Dikar
Made of stainless steel with 1/4" square shank for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end is turned for 3/16" vinyl tubing, included.
|