Flint Priming Valve , dispenses 3 grain weight, 10-1mm thread fits large flasks, brass A screw in priming valve for a Colt size flask with 10-1mm threads. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains weight of priming powder, each time the       SP-PV-3 . . . $11.99

Flint Priming Valve , dispenses 3 grain weight, 8-.75mm thread for pocket flasks, brass A screw in priming valve for a pocket size flask, fits our #FLASK-POCKET and #FLASK-UNUM. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains volume of priming       SPS-PV-3 . . . $11.99

Sideplate for your Classic Longrifles , sand cast brass Notice the tiny ball finial at the tail end. This style was used by Zorger, Ernst and other York County rifle makers. For right hand use only. Long enough for large locks, the blank front may be trimmed to your desired length. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-4-B . . . $4.99

Sideplate for your Classic Longrifles , sand cast nickel silver Notice the tiny ball finial at the tail end. This style was used by Zorger, Ernst and other York County rifle makers. For right hand use only. Long enough for large locks, the blank front may be trimmed to your desired length. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-4-S . . . $5.59

Sideplate for your Popular Longrifles , sand cast nickel silver Copied after the style of Peter Gonter. Long Enough for our Christian's Spring, Twigg, Tryon, 1750, or Jaeger rifle lock. To shorten, round the front end. Right hand use only due to deeply cast-in part number on reverse side. Overall length 5-1/4", height 1-1/16", thickness 0.125".       SP-SPW-5-S . . . $5.59

Sideplate for your Classic Longrifles , sand cast nickel silver Copied from J. Brooks, a Lancaster County maker. Right hand only, for large locks. Overall length 5-1/4", height 1", thickness 0.125".       SP-SPW-6-S . . . $5.59

Sideplate , for Thompson Center Hawken Rifle , brass Sideplate for a Thompson Center Hawken Rifle. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-B . . . $5.99

Sideplate , for Thompson Center Renegade Rifle and other models with a steel sideplate, steel Sideplate for a Thompson Center Renegade Rifle and other models that use a steel sideplate. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-I . . . $5.99

Hand Stamp , Store Keeper's Mark for Brown Bess Musket, hardened steel, made in the USA, by Track of the Wolf, Inc. The Store Keeper's Mark used by Inspectors to mark their approval on the buttstock of the King's Musket, known today as the Brown Bess Musket . The Store Keeper's Mark is generally found on the lock side of the butt stock, embossed directly into the wood after final finish. The Store Keeper's Mark is about .480" wide, about .400" tall, and the to       STAMP-GR-SKM . . . $29.99

Triggerguard, North West Trade Gun, hand forged steel Typically surface mounted, or very slightly inlet into the wrist of a North West Trade Gun, this iron triggerguard has a large trigger bow, for a gloved finger. Found on original trade guns, sold across Canada and the Northern United States by the early Fur Trade Companies, this iron triggerguard is correctly used with a brass buttplate. Copied dir       TG-NW-1-I . . . $24.99

Triggerguard, North West Trade Gun, wax cast steel Typically surface mounted, or very slightly inlet into the wrist of a North West Trade Gun, this iron triggerguard has a large trigger bow, for a gloved finger. Found on original trade guns, sold across Canada and the Northern United States by the early Fur Trade Companies, this iron triggerguard is correctly used with a brass buttplate. Copied dir       TG-NW-2-I . . . $32.99

Triggerguard, Tennessee Rifle , wax cast steel Patterned after an original from a longrifle by Bean of Tennessee. This guard has a very long bow to accommodate double set triggers. Now cast with two distinct pin lugs on the front and rear finial. You will need to remove the casting gates. Fine locks, set triggers, and good wood are standard features of the so-called Tennessee rifles, even thoug       TG-TN-2-I . . . $32.99

British Issue Musket Tool , forged & tempered imported carbon cutlery steel, pin punch & turnscrews, for your Brown Bess Musket A very useful tool for managing the Brown Bess and similar military muskets. Carry this correct replica tool in your cartridge box our pouch. The British musket tool has a large screwdriver head, for tightening the top-jaw screw on your musket, and a smaller screwdriver head for the lock bolts or any other screws. It also has a pin punch, for dismo       TOOL-BESS . . . $24.59

Double set trigger , single lever style The target style front trigger has no lever to engage the sear. The trigger must be set to fire the lock. Wax cast steel parts are tempered. We stock spare parts, rarely needed unless you bend a part. We can supply annealed triggers on request. This trigger is a precision assembly made with heat treated tool steel. If either trigger must be bent to       TR-DST-1 . . . $69.00

Double Lever Double Set Trigger, straight front trigger, wax cast, assembled This "double lever" set trigger has a front trigger lever to engage the sear, so the lock to be fired with the trigger unset. The trigger bar is about .400" wide. Wax cast steel parts are finished, tempered and assembled. We stock spare parts, in the unlikely event that any part will ever break. Same day shipment of trigger or spare parts! This tri       TR-DST-4 . . . $69.00

Double Lever Double Set Trigger, curled front trigger, wax cast, assembled Our larger double lever double set trigger, with curled front trigger. This trigger plate is 7/16" longer than #TR-DST-1 & 4 triggers. This double lever trigger will fire your lock set or unset. The plate is about .400" wide. Wax cast steel parts are tempered and assembled by Davis. We stock spare parts for this reliable fully assembled trigger. Th       TR-DST-6 . . . $69.00

Double Set Trigger early style curled long bar rear trigger The photograph shows this trigger in the "set" position. This "double lever" set trigger has a front trigger lever to engage the sear, so the lock can be fired with the trigger unset. The trigger bar is about .400" wide and 5-1/4" long. Wax cast steel parts are finished, tempered and assembled. We stock spare parts, in the unlikely event that any p       TR-DST-EA . . . $69.00

Trigger Plate, Early Longrifle or Fowler , wax cast steel Trigger plate for an early longrifle or fowler. Patterned in the style of Herman Rupp. Overall length 3-1/32", width 0.4", 1/16" thick with 5/32" thick boss at the front for a lock bolt. Trigger slot is 0.09" wide by 0.89" long. Wax cast steel. Made in the U.S.A.       TR-FG-1-P . . . $12.99

Trigger Plate, Early Longrifle or Fowler , integral pivot arms, wax cast steel Trigger plate for an early longrifle or fowler with integral pivot arms for the trigger pin. Overall length 3-1/32", width 0.4", 0.07" thick with 0.16" thick boss at the front for a lock bolt. Trigger slot is 0.09" wide by 1.07" long. Wax cast steel. Made in the U.S.A.       TR-FG-2-P . . . $12.99

Hawken Double Set Trigger , with straight front trigger, by L & R Made with an early straight front trigger, otherwise identical to the curved front trigger. Use our early Hawken "flat grip rail" triggerguard. Use on fullstocks or early halfstock Hawken rifles. Double lever, it has free-play backlash to allow the lock to be cocked with trigger set or unset. Spare parts may be used in identical triggers from the o       TR-LR-1300 . . . $100.00

Trigger , North West Trade Gun, wax cast steel This trigger design is commonly found on 1840 and earlier trade guns. The trigger can also be pinned directly to the wood, the correct early technique, which generally produces the best geometry for easy trigger release. This trigger is about .105" thick, as cast. We like the shape of this trigger for North West Trade Guns, early fusils, and simila       TR-NW-3-T . . . $7.99

Kentucky Single Set Trigger A very simple and snappy trigger design with roller cam action. The curled finial trigger resembles fancy flint era triggers. This trigger must be set before cocking the lock. To disable this feature, simply remove the trigger mainspring, switching it to a plain, non-set hunting trigger. Overall length 3-5/8", plate width is .38".       TR-SST-3 . . . $55.99

Trigger plate , Tulle fusil-de-chasse, integral pivot arms, wax cast steel Pre-inlet into our Tulle fusil-de-chasse stock, this trigger plate has a high pivot, for a light trigger pull. The lock plate may be drilled and tapped for a tang screw ahead of the trigger. The slot is .093" wide and is designed to accept our #TR-TULLE-1-T trigger. Pivot point is clearly marked in this steel wax casting.       TR-TULLE-1-P . . . $12.99

Tru-Spark , Carbonitriding Surface Hardening Compound, with Track's detailed instructions for best frizzen sparking, safe, easy to use in a home workshop, non-toxic, 4 oz., made in the USA Tru-Spark Case Hardening Compound This unique product requires only two or three minutes at high temperature to achieve a good wearing surface with fine grain structure, ideal for hardening frizzens to spark well. You will need a Oxygen Acetylene torch for hardening a frizzen. Small steel parts may be hardened using a Propane torch. Medium size       TRU-SPARK-4 . . . $21.99

has been added to your .

---