Tap, high carbon steel, 1/4-20 thread, taper tap
Part Number: TAP-1/4-20-T
Availability: In Stock
Price: $4.99
Tap, high carbon steel, 1/4-20 thread, taper tap. Track's 1/4-20 taps are used for top jaw screws.

The correct tap drill for this size tap is our Drill-7, see below.

The correct clearance drill is our Drill-F, see below.

Not sure type of tap you need? Click on the "definitions" tab above.

Gunsmithing tip: We prefer high carbon steel taps for gunsmithing. Be careful of using HSS (high speed steel) taps when tapping blind holes. If a HSS tap breaks, it must be "burned" out using an EDM tap burner, a costly process! If broken, Track's high carbon steel taps can be fractured and picked out using a drift punch.
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

Copyright © 2024 Track of the Wolf, Inc.