Kit Carson Hawken halfstock, pre shaped stock, pre-inlet,
1" octagon barrel, Jim Bridger lock
Kit Carson’s Hawken rifle features a one inch barrel channel, to build a moderate weight rifle. Not recommended as a first project, assembly of a Hawken rifle requires skilled use of a drill press, file fitting of the lock to plug, and the installation of an under rib. About 14-1/4” trigger reach, about 4” drop to line of sights. Forend is 16” long, butt end is 4-1/2 x 1-7/16”. Pre-cut for our late Hawken buttplate. Precision machine inlet for a 1” octagon barrel, our Jim Bridger Hawken lock, breech plug, tang, double set trigger, entry pipe, sideplate inlay, slotted oval wedge key inlays, and toeplate. The hole for 7/16” rod is drilled full depth.

The stock is pre-inlet to accept the 1" hooked breech and tang, #PLUG-RL-16-3. The Kit Carson stock has a fully shaped forend, with hole for a 7/16” ramrod, drilled full depth. Ramrod entry pipe is pre-inlet. Trigger mortise is pre-inlet to accept the Ron Long designed double lever double set triggers. The toe is pre-inlet to accept the beavertail toeplate. Shaped with a beaver tail cheek piece. The lock panels are pre-inlet for the late Hawken sideplate and the lock bolt hole is indicated. The oval escutcheons for the keys are pre-inlet into the stock. Inlet for our right hand Jim Bridger’s Hawken percussion lock, #LOCK-JB-R. This rifle can be build in percussion ignition only.

Specifications for pre-inlet stocks:
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

Copyright © 2019Track of the Wolf, Inc.