T/C Hawken Rifle,
.50 caliber, 28" barrel,
percussion, walnut, brass, assembled from a kit,
by Thompson Center Arms
Part Number: AAT-186
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
This .50 caliber Thompson Center Hawken percussion rifle is ready to shoot. This rifle was assembled from a kit and is stocked in American black walnut, with brass furniture, and blued 28" barrel. This rifle appears to be very lightly used with some patina on the brass from long storage. The bore is bright and has been well maintained. The barrel is finished to a dark blue and the late production kits were offered with the barrels factory finished. Weight is 8.3 pounds, and with a trigger reach of 14-1/4 inches, the rifle is perfectly setup for today's taller than average man size shooter.

The polished and blued barrel is .50 caliber, 15/16" octagon, 28" length. The front sight is Thompson Center's blued steel bead sight. The rear sight is click adjustable for elevation, and screw adjustable for windage. In excellent condition, the bore is bright and clean, with crisp rifling grooves. We recommend our .490" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder.

The rifle is stocked in straight grain black walnut and trimmed in brass furniture with some patina from long storage. The most noticeable area of patina is around the door on the rear edge of the capbox. Shaping is fair with some excess wood with flat panels on the upper lock panels and wrist. The front of the comb has a very pronounced transition to the wrist. The wood appears to be in excellent condition with none of the handling marks associated with decades of use found on most production guns.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

The color case hardened percussion lock is factory engraved. The lock plate appears to be in excellent condition with only a few small speckles on the hammer. The breech is fitted with a 1/4-28 hardened steel nipple. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release, perhaps 2 or 3 ounces. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.

Attractively priced, this Thompson Center Hawken Rifle is in excellent condition with a bright clean bore. This American made rifle is a good value. We invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value.
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

Copyright © 2020Track of the Wolf, Inc.