Bell-back tent, 9 x 11 x 7' high, 10 oz. flame resistant
Our Bell-back Tent is an A-frame tent with no back door. Instead, the back wall is made of three triangular panels staked out to increase floor space 24 to 36”, without using larger poles. Earlier in appearance than other A-frame tents, it can be used in Revolutionary War encampments, fur trade rendezvous, Civil War reenactments, and at 1870 Indian War campaign camps. Our bell-back tents use three poles for a frame. R. K. Lodges makes these with nice 12” overlapping doors at the front. Ties secure the door flaps, and 12” sod cloth inside edges all sides including the bell-back, make this tent very weather tight. Erected and staked down in less than 20 minutes, this tent is an ideal choice for one night or weekend campers, who must arrive late and leave early. You can “pull up stakes” and quickly be on your way, when you camp in our A-frame or Bell-back tents. Offered in three different canvas options; water repellent, marine finished, and flame resistant canvas. Instructions for set up are included.

Flame Resistant Sunforger Marine Finished Cotton Duck is our most durable material, with an additional CPIA-84 flame retardant treatment. Meets California code. It will self extinguish when flame source is removed. Actual weight is over 13 oz per yard. Marine Finished Sunforger Cotton Duck is a 100% cotton army duck, tightly woven, with the same off white appearance as natural cotton duck. This patented treatment is used for boat covers exposed year round. Recommended east of the Mississippi, in any high humidity area. It resists water, mildew, fungi, and industrial pollutants.

Order flame resistant material if you plan to re-sell the tent in a state requiring it. It's the law! A wise investment with children.

Our 9’ wide x 9’ deep x 7’ high bell-back tent has a 24" bell extension.

Poles required for 9 x 9' bell back tent:
  • Two (2) poles 7’ tall, , made from 2 x 2” clear straight lumber
  • One (1) ridge pole 9’ long, made from 2 x 2” clear straight lumber



  • Stakes:
    We can supply the tent pegs you require for you bell-back tent. We recommend hand forged iron stakes for use on the bell-back tent. Use 15 stakes, we recommend hand forged iron stakes for this tent.

    Rope for tents:
    We offer authentic natural fiber and cotton rope, not synthetic materials. Specify which tent or lean-to you wish to equip, and we can provide exactly the right lengths. Or order natural fiber rope by the foot, specify length. Order a hank of Cotton rope, a length of 50 feet each.

    Awnings for Bell-Back tents:
    Awnings extend about 8 feet, and are as wide as the roof slope. Brass grommets in four corners, with loops for ties or stakes on two sides. An extended or additional ridge pole and other poles will be needed. Use shorter poles at the corners. When up, the awning can form a fly on either or both sides of the door. Or stake it down during rain to provide a dry entrance.

    Ground Tarps for Bell-Back tents:
    Order a ground tarp floor. Ours have loops for ropes on all sides.

    Privacy Curtains for Bell-Back tents:
    Optional, this privacy wall flap ties inside our Bell-back tent, dividing the tent into two separate rooms.

    Stove pipe insert:
    We will install a stove pipe insert, with cover flap and ties, in a good location. Also sold separately for use in older tents. The Fiberglas® insert is rated to 1000° F, secured with harness rivets.
    Adobe Reader required to view the files below.
    Get Adobe Reader
    page_062.pdf Last updated:4/25/2012 (248 KB)

    Total: $500.00          

    Tent:
    Stakes:

    Rope:


    Awnings:
    Ground Tarp:
    Stove Pipe Insert:




    Total: $500.00          

     
    Track of the Wolf, Inc.
    18308 Joplin St NW
    Elk River, MN 55330-1773

    For your convenience you can contact us via our on-line form
    Contact the Webmaster if you have any problems with this site.
    Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
    Accepted Credit Cards