Model 1885 High Wall,
caliber .45-70 Gov't, 28" barrel,
figured walnut, tang peep sight,
in factory box, by Browning
Part Number: AAT-012
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
  
One of the first rifles designed by the famous John Moses Browning, of Utah, Winchester purchased his patent, and manufactured their popular Model 1885 Winchester Single Shot Rifle, more widely known as the High Wall Winchester. Originally made in caliber .45-70, this rifle has been reproduced by Browning in that particular caliber. This rifle is offered in excellent near-new condition, and this rifle is ready to accurately shoot your hand loads. It comes with the factory box and manuals. This rifle is fitted with a globe front sight and tang peep sight. We have this rifle on display, ready for same day shipment on receipt of your funds, and your favorite dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state. Trigger reach is 13-1/4" and this rifle weighs 8.4 pounds.

The 28" octagon barrel tapers from 1-1/8" at the breech to 3/4" at the muzzle. The blued barrel has a matte finish that is in excellent condition with no identifiable handling marks in the finish. The bore is bright and is ready to shoot. A globe front sight with circular insert is dovetailed 1" behind the muzzle. A sight blank is fitted in the rear dovetail slot. Both the left and right oblique flats have been marked, the right hand flat reads BROWNING MODEL 1885 CALIBER .45-70 GOVT while the left hand flat reads BROWNING ARMS COMPANY MORGAN, UTAH & MONTREAL P.Q. over the marking MADE IN JAPAN.

Our top view also shows the polished blue action. The tang was factory drilled and tapped, and installed was a small adjustable tang sight that is also marked BROWNING. The tang rear sight has a large adjustment knob for windage and a smaller adjustment collar for elevation. Both are “click" adjustments, a bit coarse but effective none the less. The top of the receiver, and the top flat of the barrel behind the rear sight, have been drilled and tapped for placement of a base for mounting a scope. With the factory filler screws in place, these holes are protected and ready for use if the owner were to ever wish to place a scope on the rifle.

Stocked in walnut, the butt-stock and forend are stained and finished a very nice dark brown color. The buttstock shows some figure, and the forend is fairly straight grained. The wrist and forend are checkered walnut; the checkering is still very sharp, as new from the factory. The straight grip wrist allows for quick mounting and comfortable shooting of the rifle. The forearm ends in a classic Schnabel style forend tip.

Our bottom view shows off the nice figure of the walnut stock; unmarred the wood is in excellent condition. The polished blue of the receiver continues below on the lever of the action, which has also been adorned with the gold Browning logo of a buck looking over its shoulder. Note that the rifle has been equipped with sling swivel studs, both in the buttstock and the forend; the rifle does not come with a sling. Our back view shows that this rifle has no cheek, and no cast off, creating perfect symmetry that is equally well suited to the right or left hand shooter.

The blued steel action works smoothly and properly. The hammer is pushed through half-cock and to full-cock during operation of the action. The half-cock position is safely engaged and will not allow the rifle to be fired. The serial number for this particular gun is found on the bottom right side of the receiver.

Cartridge cases are readily available from a variety of sources. It may be wise to buy a quantity of cases, all at the same time, from the same lot, for uniformity. We recommend ordering a least 100 cases, and perhaps 200, depending on your reloading schedule. Track can supply the .45-70 mold, shell holder, loading dies, bullet lubricant, loading press, sizing dies, and black powder.

This beautiful rifle, originally designed by John Browning, built by Winchester and then reproduced by Browning, has once again been discontinued. Not currently being made by Browning, this new in the box rifle is a unique piece that may never be manufactured again. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: Item is currently sold out.
Price: $0.56
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: Item is currently sold out.
Price: $25.50
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: Item is currently sold out.
Price: $49.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .457" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-457-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $24.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $24.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.25
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: In Stock
Price: $26.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: Item is currently sold out.
Price: $22.59
Order Quantity:
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: Item is currently sold out.
Price: $22.59
Order Quantity:
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: Item is currently sold out.
Price: $22.59
Order Quantity:
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: In Stock
Price: $22.59
Order Quantity:
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
LEE Classic Cast Reloader Press, for pistol or rifle cartridges
Part Number: LEE-90998
Availability: Item is currently sold out.
Price: $152.99
Order Quantity:
  
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $36.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $13.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $16.99
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 330 grain hollow point mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-122
Availability: Item is currently sold out.
Price: $78.99
Order Quantity:
  
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 292 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-191
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 405 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-193
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 400 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-643
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, Schmittzer pointed bullet, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-658
Availability: In Stock
Price: $78.99
Order Quantity:
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $5.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.89
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $56.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: Item is currently sold out.
Price: $41.99
Order Quantity:
  
.457" Sizing & Lube die,
by Lyman
.457" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-457
Availability: Item is currently sold out.
Price: $31.99
Order Quantity:
  
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $31.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $31.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.29
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $3.29
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards