Double Shotgun, 10 gauge, 30" barrels, cylinder bore and integral modified choke, percussion, checkered walnut, blued steel, used, by Davide Pedersoli

Home > Guns > Brand name factory finished guns > DP - Davide Pedersoli - Italy

Double Shotgun,
10 gauge, 30" barrels,
cylinder bore and integral modified choke,
percussion, checkered walnut, blued steel,
used, by Davide Pedersoli

Part Number:	AAT-877
Availability:

This nice double percussion shotgun is stocked in walnut with checkered wrist and forearm, and cheek piece for a right hand shooter. The 30" long barrels are polished and finished to a dark brown. The factory engraved percussion locks are polished bright. Manufactured by Davide Pedersoli & Company of Italy this shotgun is used with some small handling marks on the stock, and wear on the brown barrel finish. The 13-3/8" and 14-1/4" trigger reach should fit today's average shooter quite well. The weight is 7.4 pounds.

The 10 gauge barrels are cylinder bore for the right barrel, measuring .775" diameter, and modified choke for the left barrel, measuring .755" diameter. Both bores are bright and well maintained. The cylinder bored barrel allows the choice of a patched round ball, lead or bismuth shot. The modified choke is best used with shot only. The barrels are 30" long including the breech plug, polished and finished to a dark brown. The brown finish on these barrels does wear fairly quickly and this shotgun does have some lightening of the brown around the breech plugs and some light scratches. The front sight is a standard brass bead, with an additional brass bead at the mid-point of the barrel.

The stock is fine closed grain walnut, and will give a lifetime of good service. Used, the stock has some scattered small handling marks. The straight grip and forearm are checkered, the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, comfortable with full loads in this 10 gauge. The long tang is polished bright, factory engraved to match the triggerplate, and locks. A cheekpiece is carved, making this shotgun ideal for a right hand shooter. The sling swivel stud is mounted in the toe of the buttstock. A matching swivel is mounted through the rear ramrod pipe. No sling is included with this shotgun. The factory wooden ramrod is fitted with a brass loading tip, and the rear tip is threaded to accept 10-32 cleaning and loading accessories.

A single wedge key retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. Remove the two standard 1/4-28 nipples, using our # #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our # #Jag-10-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with WD-40 or other water displacing oil. Never insert a dry patch. If you used warm water, the warm barrels will dry instantly.

Davide Pedersoli double shotguns use our standard 1/4-28 nipple. However, he taps the thread seats to the minimum size, knowing that normal use will wear the nipple threads, over time, enlarging them to better fit a standard nipple. This rifle is fitted with 1/4-28 stainless steel Hot Shot nipples. These are quite snug in the thread seats. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads, and install the nipples.

The Pedersoli shotgun locks are polished bright, factory engraved with foliage, scrolls, and fowl. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure.

In excellent condition, this shotgun will be a joy to carry in the bird field. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Bore mop, 100% Cotton, for .75 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-75-10
Availability:
Price:	$4.39

Ball puller, steel screw, .75 caliber brass collar, 10-32 thread

Part Number:	BP-75-10
Availability:
Price:	$4.59
Order Quantity:

Bore brush, bronze, for .75 caliber, 10-32 thread

Part Number:	BRUSH-75-10
Availability:
Price:	$3.89

Shot flask, adjustable brass English charger head, sueded leather body

Part Number:	FLASK-ENG-S
Availability:
Price:	$109.99

Cylindrical Brass Powder Flask, 5" length, 1-1/4" diameter accepts 10-1mm threaded spouts

Part Number:	FLASK-PS
Availability:
Price:	$34.99
Order Quantity:

Button jagged cleaning tip, 10 gauge, brass, 10-32 thread

Part Number:	JAG-10-10
Availability:
Price:	$4.29
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99

Nipple Wrench for Rifles, short style, with slotted end

Part Number:	NW-160
Availability:
Price:	$9.99
Order Quantity:

10 gauge shotgun Preminum Lube Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-10-W
Availability:
Price:	$13.99
Order Quantity:

Ramrod, 1/2" hickory, 48" long, brass tip, 10-32 thread

Part Number:	RAMROD-8-10-B
Availability:
Price:	$19.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds

Part Number:	SHOT-4
Availability:
Price:	$35.99
Order Quantity:

Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns

Part Number:	SHOT-BIRD-7
Availability:
Price:	$17.59

10 gauge, .787" ideal for .775" bore, .125" over powder card, 1000, by Circle Fly Wads

Part Number:	WAD-10-A
Availability:
Price:	$12.69
Order Quantity:

10 gauge, .787" ideal for .775" bore, .025" over shot card, 1000, by Circle Fly Wads

Part Number:	WAD-10-B
Availability:
Price:	$12.69
Order Quantity:

10 gauge, .787" ideal for .775" bore, .500" thick fibre wad, 500, by Circle Fly Wads

Part Number:	WAD-10-C
Availability:
Price:	$12.69
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.

Part Number:	CATALOG-18
Availability:
Price:	$10.00

Top of Page Home > Guns > Brand name factory finished guns > DP - Davide Pedersoli - Italy