Left Fowling Gun
20 gauge 46" octagon-to-round barrel,
Siler flint lock, curly maple, iron trim, used
Part Number: AAS-893
Availability: In Stock
Price: $1,349.00
Order Quantity:
This used left hand Fowler is stocked in maple stained to a warm brown. Fitted with a large Siler lock, this iron trimmed flint smoothbore is built around a 20 gauge, 46" octagon-to-round barrel. Used is fowler has a few scattered handling marks on the stock and brown finish on the barrel, lock, and furniture. Weighing in at 7.8 pounds the fowler has a trigger reach of 13-3/4", perfectly setup for today's average size shooter.

The 20 gauge smoothbore octagon-to-round smoothbore barrel is ready to go. The octagon flats travel 15" forward before transitioning to round at a single wedding band. The barrel is finished to a light brown with a silvery gray undertone. The muzzle end is fitted with a browned steel turtle front sight. No rear sight is fitted in fowling gun fashion. The .620" diameter bore is bright and has been well maintained.

The maple stock is finished to a warm brown to best display the figure over the length of the stock. The stock has a few scattered handling marks as well as some streaks in the finish from cleaning. The butt is fitted with a large, wide, nearly flat buttplate to spread the felt recoil over a large area. The comb of the buttplate is shaped with broad steps in English fashion. The buttplate is the buttplate is not perfectly centered behind the tang. Rather, it is offset from the left hand shooter's cheek. It places the left hand shooter's eye directly behind the line of sight, making this gun instinctive to point and shoot. The barrel is breeched with a flared tang. The lock panels taper widest at the rear in early long gun fashion.

The bottom view shows the rounded toe. The toe has a few scattered marks and the toe is one of the most common areas to pick up dents and dings from being place on the ground during loading and cleaning. Three ramrod pipes secure the ramrod to the stock. The ramrod is fitted with a brass tip with 8-32 threads for loading and cleaning accessories. A square tail fowler sideplate supports the two lock bolts that engage the large Siler flintlock opposite. No cheek piece is fitted in fowling gun fashion.

Our view of the lock shows that flint ignition is provided by the left hand large Siler flint lock, which is tuned to spark well. This lock is modeled after a fine hand made original lock by the famous American gunmaker, Jacob Dickert. This lock captures the styling used on many American longrifles. We recommend using our best hand knapped English 3/4" flints for use with this lock. A stainless steel vent liner is drilled in the side flat of the barrel. The vent is well positioned both horizontally and vertically on the pan. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash.

Used, we recommend simple and attractive left hand Fowling Gun to the French & Indian War era reenactor, or the Revolutionary War volunteer, seeking a suitable gun for militia duty. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $12.99
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $9.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Part Number: BORE-MOP-62-10
Availability: In Stock
Price: $3.49
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Part Number: BP-62-10
Availability: In Stock
Price: $4.50
Order Quantity:
Bore brush, bronze, for .62 caliber, 10-32 thread
Bore brush, bronze, for .62 caliber, 10-32 thread
Part Number: BRUSH-62-10
Availability: In Stock
Price: $3.39
Order Quantity:
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6
Availability: In Stock
Price: $2.20
Order Quantity:
Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6-PACK-12
Availability: In Stock
Price: $22.00
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Part Number: JAG-20-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .600" round ball mold,
double cavity, with handles,
for .62 rifles and 20 gauge guns.
Lee .600" round ball mold, double cavity, with handles, for .62 rifles and 20 gauge guns.
Part Number: LEE-600-DC
Availability: In Stock
Price: $22.59
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: In Stock
Price: $78.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: Item is currently sold out.
Price: $41.99
Order Quantity:
  
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.85
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.19
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: Out of Stock, request notification when available.
Price: $28.99
  
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: Out of Stock, request notification when available.
Price: $17.59
  
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $10.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards