1877 Sharps Rifle,
caliber .45-70 Gov't, 30" barrel,
checkered walnut, M.V.A. globe and tang sight,
used, by Axtell Rifle Co.
Part Number: AAU-056
Availability: In Stock
Price: $4,499.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
This Sharps Model 1877 Rifle is best quality. It was manufactured by the now retired Axtell Rifle Company, Sheridan, Montana. This Model 1877 rifle weighs 11 pounds and has a 13-3/4" trigger reach. This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state.

The 30" barrel is tapered octagon and chambered in caliber .45-70 Government. The bore is bright and has been well maintained. The top flat is marked Axtell Rifle Co. and Model 1877 / Sheridan, Montana. The caliber marking is on the left hand side flat. The barrel is fitted with a Montana Vintage Arms spirit level front sight with windage adjustment. No barrel mounted rear sight is fitted. The tang has a M.V.A. Soule sight with 2-1/4" of elevation adjustment. The staff is fitted with a M.V.A. brand Hadley eye disk, to best suit changing light conditions.

Stocked in walnut with a checkered pistol grip, forearm, and finished to a satin sheen. Metal to wood fit is excellent and this rifle has been well maintained with only a few small handling marks. The buttplate is checkered steel The rounded toe of this 1877 buttstock tapers to the applied pistol grip. The checkered pistol grip is fitted with a steel grip cap. The wrist and forearm have hand cut checkering. The forend is shaped with a schnabel tip.

Beautifully color case hardened, in subtle shades of blues, purples, gray, with faint yellow undertones, this slender back action lock is very attractive and retains all of its spectacular color. The 1877 Sharps lock is smooth and crisp, with a reliable half-cock safety notch positioned just above the firing pin. Put the lock at half cock and push the loading lever all the way forward drop the breech for loading. Double lever double set triggers are fitted. The triggers are properly tuned to fire set, or unset. You may set the triggers before or after cocking the lock.

This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state. This used 1877 Sharps rifle has only the long range staff for shooting from supine position. This rifle will require load development, and fine tuning, for serious target competition. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, 400, and 600 yard range. If you enjoy shooting, recording results, and creating loads, order this rifle, today. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: Out of Stock, request notification when available.
Price: $0.58
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: Out of Stock, request notification when available.
Price: $26.50
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: Out of Stock, request notification when available.
Price: $47.00
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $3.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $3.99
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $45.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $15.29
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.79
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: Out of Stock, request notification when available.
Price: $92.99
  
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: Out of Stock, request notification when available.
Price: $92.99
  
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $6.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $9.99
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $62.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $49.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $35.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $35.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2022Track of the Wolf, Inc.
Accepted Credit Cards