Remington No. 3 Hepburn Long Range Grade A Rifle,
caliber .45-90, 31" octagon Ron Snover barrel,
Vernier tang & globe sight, walnut, with accessories,
as-new, unfired, by Oklahoma Territory Arms
Part Number: AAT-573
Availability: In Stock
Price: $5,669.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
The development of the Remington-Hepburn match rifle is a direct result of the competition of the American and Irish shooting teams in the 1870's. Lewis Hepburn was a riflesmith and target shooter. Employed as a foreman in the mechanical department at Remington, he was assigned to design half of the rifles the American team would use at Creedmoor. The rolling block action was used, and the Remington Creedmoor Target rifle went on to allow the Americans to win by a slim margin. Hepburn later went to work to design a better action for a target rifle, than the rolling block action. In 1879 the Remington-Hepburn falling block action was designed.

This reproduction of a No. 3 Grade A Long Range rifle was produced by Oklahoma Territory Arms with a significant amount of the gunsmithing done by Jim Hamilton, who is a member of the American Custom Gunmakers Guild. The No. 3 Grade A rifle differs from the Grade B & C rifles, due to the fact that it does not have a cheekpiece. This Grade A reproduction includes a color case hardened action, shot gun butt, Schnabel forearm tip, checkered pistol grip, and deluxe wood. Upgrades to this Grade A rifle include a checkered forearm. This rifle is chambered in caliber .45-90 with a full octagon Ron Snover 31" barrel with round bottom Medford-style rifling with a 1 in 17" twist. The sights were made by Frank Zika and include a long range Soule rear sight and spirit level front sight. This rifle is offered as-new, unfired. The trigger reach is 14-1/4" and the wight is 11.7 pounds. We have this rifle on display, ready for same day shipment on receipt of your funds and your favorite dealer's signed FFL copy. We must deliver to a Minnesota resident, or to your favorite licensed dealer in any other state.

This rifle comes with the following accessories: Redding three piece .45-90 die set, Buffalo Arms custom .45 caliber compression die plug for Redding Die, Buffalo Arms custom expander plug for Redding die, Paul Jones .45-70 single cavity mold with Redding handles, Hagar press-mounted wad punch with punches and bushings for .40 and .45 calibers, 100 count Remington .45-90 cases formed from .45-70 cases by Buffalo Arms, and 120 count cast bullets. These cast bullets are as follows: 80 count of Lyman 535 grain Postell, 20 count of Paul Jones 497 grain, 20 count of Lyman 517 grain.

The 31" long Ron Snover (IXL Enterprises) barrel is chambered in caliber .45-90, with a 1 in 17" twist with round bottom Medford-style rifling. The barrel has a slight taper, measuring 1.15" at the receiver and 1.06" at the muzzle. The bore is bright, clean, and ready to shoot. The barrel is finished to a beautiful dark blue. The top flat of the barrel is marked BLACK POWDER ONLY. The bottom flat is marked 45 90 just ahead of the forearm tip. The spirit level globe front sight is dovetailed 1" behind the muzzle. The long range Soule rear tang sight was made by Frank Zika. The sight features fine adjustments for windage and elevation.

The butt stock is figured walnut, with high comb and checked pistol grip. The stock is in overall excellent condition, and is fitted with a checkered hard rubber buttplate with original style Remington logo. A single screw retains the checkered walnut forend, which is finished with a Schnabel tip and ebony insert. The hammer and falling breech block are both blued to contrast the color case hardened action. The color case hardening features mottled swirls of gray, blue, and purple. The action is mounted with a color case hardened triggerguard. The left side of the action is marked HEPBURNS PAT OCT 7th 1879 in two lines. The right side of the action is marked OKLAHOMA TERRITORY ARMS COMPANY, L.L.C. in two lines. The bottom tang is stamped with the serial number. This Remington-Hepburn falling block action has the side lever which raises and lowers the breech block. The exposed hammer must be manually cocked before firing. The single trigger provides a smooth release of the hammer.

We recommend this No. 3 Grade A Remington-Hepburn rifle for target shooting. This rifle will be a joy to shoot in long distance shooting matches! We have this rifle on display, ready for same day shipment on receipt of your funds and your favorite dealer's signed FFL copy. We must deliver to a Minnesota resident, or to your favorite licensed dealer in any other state. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-90 Winchester,
unprimed brass,
correct head stamp,
2.4", by Starline,
100 pieces
Cartridge Case, .45-90 Winchester, unprimed brass, correct head stamp, 2.4", by Starline, 100 pieces
Part Number: CASE-45-90-PACK-100
Availability: Out of Stock, request notification when available.
Price: $97.00
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Part Number: GOEX-FFG
Availability: Item is currently sold out.
Price: $26.92
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
  
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Part Number: GOEX-FG
Availability: Item is currently sold out.
Price: $26.92
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
  
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: Out of Stock, request notification when available.
Price: $31.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $6.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $9.99
Order Quantity:
Lyman Classic Die Sets,
for .45-90 Winchester caliber
Lyman Classic Die Sets, for .45-90 Winchester caliber
Part Number: LYMAN-DIE-45-90
Availability: Out of Stock, request notification when available.
Price: $69.99
  
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $47.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $34.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $3.29
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards