Model 1885 High Wall,
caliber .45-120, 30" barrel,
walnut, antique Lyman tang peep sight,
used, mfg. by Aldo Uberti & Co.
Part Number: AAT-305
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
  
One of the first rifles designed by the famous John Moses Browning, of Utah, Winchester purchased his patent, and manufactured their popular Model 1885 Winchester Single Shot Rifle, more widely known as the High Wall Winchester. This rifle is chambered in caliber .45-120 Sharps, .45 3-1/4", This rifle is fitted with a blade front sight and antique Lyman tang peep sight. We have this rifle on display, ready for same day shipment on receipt of your funds, and your favorite dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state. Trigger reach is 13-1/4" and this rifle weighs 9.3 pounds.

The 30" octagon barrel tapers from 1-1/16" at the breech to just over 7.8" at the muzzle and is high polished and blued. The blue finish has a light spot on the top flat 13" ahead of the breech. The bore is bright and is ready to shoot. A blade front sight is dovetailed 1" behind the muzzle. A sight filler blank is fitted in the rear dovetail slot. The top flat is stamped Uberti USA Lakeville CT/ Made in Italy by A. Uberti and Cal. .45-120 just ahead of the breech.

Stocked in walnut, the butt-stock and forend are noticeably different shades with a much darker appearance on the buttstock. The buttstock has a large dark mineral stain on the upper right hand side near the comb. The buttstock has a small chip on the right lower edge at the corder where the tang and action meet. The straight grip wrist allows for quick mounting and comfortable shooting of the rifle. The forearm ends in a classic Schnabel style forend tip. Our top view also shows the color case hardened action. The tang is drilled and tapped with a antique Lyman peep sight fitted to the rifle.

Our bottom view shows off the small amount of figure on the walnut stock. The stock has a few small scattered handling marks. The color case hardened finish of the receiver and lever have faded slightly from use. Our back view shows that this rifle has no cheek, and no cast off, creating perfect symmetry that is equally well suited to the right or left hand shooter.

The color case hardened steel action works smoothly and properly. The hammer is pushed through half-cock and to full-cock during operation of the action. The half-cock position is safely engaged and will not allow the rifle to be fired. It may be wise to buy a quantity of cases, all at the same time, from the same lot, for uniformity. We recommend ordering a least 100 cases, and perhaps 200, depending on your reloading schedule. Track can supply the mold, shell holder, loading dies, bullet lubricant, loading press, sizing dies, and black powder.

This handy large caliber rifle, originally designed by John Browning, built by Winchester and then reproduced by Aldo Uberti & Co. of Italy is used with a well maintained bore. It has a antique Lyman sight fitted to the action. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-120 Sharps, 3-1/4",
unprimed brass,
each piece, no minimum order
Cartridge Case, .45-120 Sharps, 3-1/4", unprimed brass, each piece, no minimum order
Part Number: CASE-45-120
Availability: Out of Stock, request notification when available.
Price: $2.50
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Due to high demand expect 45+ days for delivery from time of order!
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Due to high demand expect 45+ days for delivery from time of order!
Part Number: GOEX-FFG
Availability: In Stock
Price: $26.92
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Due to high demand expect 45+ days for delivery from time of order!
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Due to high demand expect 45+ days for delivery from time of order!
Part Number: GOEX-FG
Availability: In Stock
Price: $26.92
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.25
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: Out of Stock, request notification when available.
Price: $31.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: Out of Stock, request notification when available.
Price: $21.99
  
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 330 grain hollow point mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-122
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 292 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-191
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 405 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-193
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 400 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-643
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, Schmittzer pointed bullet, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-658
Availability: Out of Stock, request notification when available.
Price: $82.99
  
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: Item is currently sold out.
Price: $6.29
Order Quantity:
  
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: Item is currently sold out.
Price: $43.99
Order Quantity:
  
.457" Sizing & Lube die,
by Lyman
.457" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-457
Availability: In Stock
Price: $32.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: Out of Stock, request notification when available.
Price: $32.99
  
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: Out of Stock, request notification when available.
Price: $32.99
  
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: Out of Stock, request notification when available.
Price: $8.79
  
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2" diameter, bag of 1000, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 1000, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45M
Availability: In Stock
Price: $22.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: Out of Stock, request notification when available.
Price: $16.49
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards