1874 Sharps No. 3 Rifle,
.45-70 Gov't, 32" octagon barrel,
checkered walnut, color case hardened trim,
6X Malcolm telescope, excellent, used, by Davide Pedersoli
Part Number: AAS-298
Availability: In Stock
Price: $1,399.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
This 1874 Sharps rifle, by Davide Pedersoli has a checkered walnut buttstock and forearm, a 32" octagon barrel and is chambered for the .45-70 Government cartridge. The rifle is fitted with a 6X Malcolm telescope. This rifle is used, with a few minor handling marks, but is otherwise in excellent condition with a bright clean bore. This 11.2 pound rifle is an excellent choice for iron silhouettes, buffalo matches, and steel gongs at 400 and 600 yards. The weight is a great advantage when shooting from a rest and it greatly reduces recoil. The trigger reach is 14" to fit todays average size shooter.

This is a favorite rifle for long range black powder cartridge shooters. Sharps rifles by Davide Pedersoli have recently placed in NRA Black Powder Silhouette Matches, at Raton, New Mexico. This Sharps rifle is stocked in a lightly figured piece of walnut. The rifle has a Schnabel style forearm, and case colored receiver, hammer, lever, and triggerplate. The military style buttplate has a modest curve to engage the shooter's shoulder.

The rifle is fitted with a 6X Malcolm telescope. The front of the scope is mounted to a dovetailed block near the muzzle of the barrel. The rear mount adjusts elevation. Loosen the large locking knob, slide the scope to the desired setting, and snug the knurled locking knob.

Our top view shows the tapered comb of the Sharps buttstock, the color case hardened action, and the highly polished blued barrel. Notice that the octagon flats of the barrel flare to round, before they enter the action. This classic feature, found on most Bridgeport made Sharps rifles, is called the tulip.

The toe of the stock shows little use, with only a few minor handling marks. The wrist and forearm are checkered for a secure grip. Architectural details include the semi-circular flat on the walnut forend, in front of the action, a nice touch. Our bottom view shows the color case hardened lever. Nearly all required factory markings are on the bottom flat of the barrel, ahead of the forend, another nice touch. The tiny government proof mark is along the front edge of the action, and the serial number is correctly centered on the tang. Our back view shows the straight grip stock with its steel buttplate and no cheek piece.

Correctly color case hardened, in subtle shades of blues, purples, greys, with faint yellow undertones, this big lock is quite attractive. The 1874 Sharps lock action has the earlier 1863 Sharps tumbler with the half-cock safety notch positioned well above the firing pin. A fly détente in the tumbler insures perfect action and fast lock time, when using the set trigger.

The double set trigger has double levers allowing you to cock the lock, or set the trigger, in any sequence. When fired from the front trigger alone, trigger release is a normal 2 to 3 pounds. When fired with the rear trigger set, the front trigger release may be adjusted to nearly zero, using the set screw between the triggers.

We strongly recommend using these set triggers for dry fire practice, which is perfectly harmless, provided that the hammer is fully down, not at the half-cock safety notch. Dry firing, at a small black dot on a white piece of paper, each evening, is the best way to develop skills, practice follow-through, and to eliminate the tendency to flinch during recoil.

This rifle will require load development, and fine tuning, for serious target competition. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, 400, and 600 yard range. If you enjoy shooting, recording results, and creating loads, this rifle is for you. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: In Stock
Price: $0.56
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: In Stock
Price: $25.50
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: In Stock
Price: $49.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $23.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $23.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.25
Order Quantity:
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $36.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $13.99
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: In Stock
Price: $78.99
Order Quantity:
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: In Stock
Price: $78.99
Order Quantity:
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $5.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.89
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $55.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $41.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $31.59
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $31.59
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.29
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards