1858 Remington New Model Army Revolver,
.44 caliber, 8" barrel,
percussion, walnut, blued steel frame,
used, by Pietta
Part Number: AAU-237
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This 1858 Remington New Model Army revolver is offered in used condition. The cylinder has markings in the blue finish from cocking, and there are a few dings around the nipples from using a large size nipple wrench to remove the nipples for cleaning. The bore is bright and has been well maintained. The walnut grips have a few light handling marks. This .44 caliber steel frame revolver will give years of reliable service. The famous manufacturer is Pietta of Italy.

The side flats of the barrel bear the maker's name, and Black Powder Only .44 Cal.. The bore is bright and has been well maintained. The 8" octagon barrel is fitted with a post blade front sight. The notch in the center of the frame serves as the rear sight. There are a few light scratches in the bluing from normal use. The walnut grips are factory finished with a deep red satin varnish, mounted with a blued steel screw, through brass escutcheons.

The traditional brass triggerguard is polished bright, with a few darker tarnish marks from use. The Remington trigger is wide and comfortable. The rigid steel frame of the 1858 Remington made it highly prized by its users. More officers carried Colt revolvers during our Civil War. When the war ended, more Remington's were purchased by discharged officers.

The blued cylinder has the Remington safety notches cut between each nipple recess. Pull the hammer to half-cock, turn the cylinder to align the safety notch with the hammer nose, and set the hammer into the notch. You can safely carry this revolver with all six chambers loaded, if you rest the hammer in a safety notch. The original blued steel Italian nipples are too small to properly fit American No. 11 percussion caps. We recommend replacing the nipples with our #PIR-LI best 6-. 75mm thread hardened steel which are designed to accept CCI No. 11 caps.

The factory recommends our #BALL-451 pure lead .451" round ball, but we strongly prefer the slightly larger #BALL-454 Hornady .454" round ball, which provides better compression, noticeably more power, and best accuracy. However, an oversize ball tends to shear lead at each chamber mouth, changing the size and bullet weight, a problem. This revolver has slightly chamfered chamber mouths. If your revolver shaves lead, slightly polish each chamber mouth with fine emery and a marble, until the ball seats fully, compressing the lead instead of shearing it.

This percussion revolver has a bright bore and is ready to shoot. It will be a joy to shoot at the range or carry to your next Civil War reenactment. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.451" round balls, pure lead, Hornady, per 100
.451" round balls, pure lead, Hornady, per 100
Part Number: BALL-451
Availability: In Stock
Price: $14.59
Order Quantity:
.454" round balls, pure lead, Hornady, per 100
.454" round balls, pure lead, Hornady, per 100
Part Number: BALL-454
Availability: In Stock
Price: $14.59
Order Quantity:
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: Out of Stock, request notification when available.
Price: $6.99
  
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $11.99
Order Quantity:
Fancy Capper, snail shaped, brass, by Tedd Cash
Fancy Capper, snail shaped, brass, by Tedd Cash
Part Number: CAPPER-REV-B
Availability: In Stock
Price: $25.59
Order Quantity:
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads
Part Number: FLASK-COLT
Availability: Out of Stock, request notification when available.
Price: $39.99
  
Military Holster, right hand, 
black leather, plain flap
Military Holster, right hand, black leather, plain flap
Part Number: HOLSTER-MB-R
Availability: In Stock
Price: $24.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
Nipple Wrench for Revolvers, for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess.
Part Number: NW-140
Availability: In Stock
Price: $8.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $3.99
Order Quantity:
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Part Number: OX-REV-44-SEAL
Availability: In Stock
Price: $9.69
Order Quantity:
.44/.45 caliber revolver Ox-Yoke Wonder Wad,
bag of 100 lubricated felt wads
.44/.45 caliber revolver Ox-Yoke Wonder Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-44-W
Availability: In Stock
Price: $7.79
Order Quantity:
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, hardened steel

Cone length: 0.319" Thread journal length: 0.225" Overall length: 0.544" Diameter of base: 0.307"
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, hardened steel
  • Cone length: 0.319"
  • Thread journal length: 0.225"
  • Overall length: 0.544"
  • Diameter of base: 0.307"
Part Number: PIR-LI
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel

Cone length: 0.319" Thread journal length: 0.225" Overall length: 0.544" Diameter of base: 0.307"
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel
  • Cone length: 0.319"
  • Thread journal length: 0.225"
  • Overall length: 0.544"
  • Diameter of base: 0.307"
Part Number: PIR-LS
Availability: In Stock
Price: $4.99
Order Quantity:
Drift Punch,
knurled brass,
for wedge keys and sights.
Drift Punch, knurled brass, for wedge keys and sights.
Part Number: TOOL-KEY-B
Availability: In Stock
Price: $5.29
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2022Track of the Wolf, Inc.
Accepted Credit Cards