Remington Pocket Model Revolver, .31 caliber, 3-1/2" barrel, spur trigger, brass frame, used, by A.S.M.

Home > Guns > Percussion guns > Percussion pistols & revolvers

Remington Pocket Model Revolver,
.31 caliber, 3-1/2" barrel,
spur trigger, brass frame,
used, by A.S.M.

Part Number:	AAU-233
Availability:

This replica Remington Pocket Model Revolver has a brass frame, blued octagon barrel, and walnut grips. In good condition this nice revolver has a few handling marks from normal use. The bore is bright and has been well maintained. This small revolver is .31 caliber, with a blued cylinder. Pocket Model revolvers were favored by gamblers, off-duty law officers, postmasters, and gentlemen of means and high position.

This small revolver was made in Italy by Armi San Marco. The right barrel flat is marked A.S.M. Black Powder Only Cal. 31 Made in Italy. The blued octagon barrel is 3-1/2" length. A small brass post serves as a front sight, and a groove in the frame acts as the rear. The brass frame has darkened from use and age. The grips have a few small handling marks from use.

The factory recommends .320" round balls, and each chamber will hold 15 grains of FFFg powder. We recommend 12 grains of GOEX FFFg powder, and our .320" round balls, #BALL-320-X, for best accuracy and better compression. Cover each ball with a small amount of bullet lubricant grease.

Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Lower the loading lever, remove the cylinder pin, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued use will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.

This small pocket revolver has a bright well maintained bore. It will be a joy to shoot at the range at close targets. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.315" round balls, pure lead, Hornady, per 100

Part Number:	BALL-315
Availability:
Price:	$10.79
Order Quantity:

.319" round balls, pure lead, hand cast, per 100

Part Number:	BALL-319-X
Availability:
Price:	$14.59
Order Quantity:

.320" round balls, pure lead, hand cast, per 100

Part Number:	BALL-320-X
Availability:
Price:	$14.59
Order Quantity:

.323" round balls, pure lead, hand cast, per 100

Part Number:	BALL-323-X
Availability:
Price:	$14.59
Order Quantity:

Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey

Part Number:	BC-CTL
Availability:
Price:	$6.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$11.99
Order Quantity:

Powder Flask, for Colt Pocket Model Revolver, copper, with embossed Eagle motif, accepts 8-.75mm threaded spouts

Part Number:	FLASK-POCKET
Availability:
Price:	$35.99

Powder Flask, Colt style Unum Flask accepts 8-.75mm threaded spouts

Part Number:	FLASK-UNUM
Availability:
Price:	$35.99

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.59
Order Quantity:

Nipple Wrench for Revolvers, for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess

Part Number:	NW-130
Availability:
Price:	$8.99
Order Quantity:

Cleaning Patches, 1-1/4" diameter, bag of 100, pure cotton flannel, for .22 to .27 caliber

Part Number:	OX-CLEAN-27C
Availability:
Price:	$2.79
Order Quantity:

.30/.31 caliber revolver Wool Wad, bag of 100 dry felt wads

Part Number:	OX-WAD-31-D
Availability:
Price:	$7.19
Order Quantity:

.30/.31 caliber revolver Ox-Yoke Wonder Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-31-W
Availability:
Price:	$7.79
Order Quantity:

Drift Punch, knurled brass, for wedge keys and sights.

Part Number:	TOOL-KEY-B
Availability:
Price:	$5.29
Order Quantity:

Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.

Part Number:	CATALOG-18
Availability:
Price:	$10.00

Top of Page Home > Guns > Percussion guns > Percussion pistols & revolvers